PSME Mechanical Design and Fabrication Technical Division

23/10/2026

Mechanical Design and Fabrication (MDF) Objectives and Mission 📽

𝐌𝐃𝐅 𝐅𝐫𝐞𝐞 𝐌𝐞𝐦𝐛𝐞𝐫𝐬𝐡𝐢𝐩 𝐑𝐞𝐠𝐢𝐬𝐭𝐫𝐚𝐭𝐢𝐨𝐧 opens on 𝐎𝐜𝐭𝐨𝐛𝐞𝐫 𝟐𝟔, 𝟐𝟎𝟐𝟔 (𝐌𝐨𝐧𝐝𝐚𝐲). Mark your calendars!

22/10/2026

Our TD Chairwoman, 𝐄𝐧𝐠𝐫. 𝐌𝐚𝐫𝐢𝐚 𝐂𝐡𝐞𝐫𝐫𝐲 𝐁𝐚𝐝𝐚𝐠𝐮𝐚𝐬, proudly represents the MDF Community during the Technical Division Parade at 74th PSME National Convention. 🦾🫶

20/10/2026

As our 𝐌𝐞𝐦𝐛𝐞𝐫𝐬𝐡𝐢𝐩 𝐝𝐫𝐢𝐯𝐞 gears up to launch this month, let us take a closer look at our Philosophy--to build a stronger community of mechanical design and fabrication professionals united by a shared purpose.

𝙊𝙪𝙧 𝘼𝙞𝙢𝙨. 𝙊𝙪𝙧 𝙂𝙤𝙖𝙡𝙨. 𝙊𝙪𝙧 𝙈𝙞𝙨𝙨𝙞𝙤𝙣. --> Please refer to the accompanying photos for your perusal.

In addition, with reference to 𝐏𝐒𝐌𝐄 𝐁𝐨𝐚𝐫𝐝 𝐑𝐞𝐬𝐨𝐥𝐮𝐭𝐢𝐨𝐧 𝐑𝐁𝟐𝟎𝟏𝟕-𝟏𝟏 (𝐏𝐒𝐌𝐄 𝐓𝐞𝐜𝐡𝐧𝐢𝐜𝐚𝐥 𝐃𝐢𝐯𝐢𝐬𝐢𝐨𝐧 𝐌𝐚𝐧𝐮𝐚𝐥), our direction is guided by the following provisions under Section 1 (Mission) and Section 2 (Vision), respectively:

1.1. The mission of Technical Division (TD) is to help realize the Society’s purpose to advance the art and science of mechanical engineering, the allied arts and science and related human factors for the benefit of the public;

2.1. To be the first choice of Mechanical Engineers to help them advance their career
2.2. To be the Philippine technological driver and innovation leader in its field of mechanical engineering

Every member matters, every contribution counts, and every connection brings us one step closer to a stronger community.

𝐒𝐭𝐚𝐲 𝐭𝐮𝐧𝐞𝐝 𝐟𝐨𝐫 𝐭𝐡𝐞 𝐨𝐟𝐟𝐢𝐜𝐢𝐚𝐥 𝐦𝐞𝐦𝐛𝐞𝐫𝐬𝐡𝐢𝐩 𝐝𝐫𝐢𝐯𝐞 𝐚𝐧𝐧𝐨𝐮𝐧𝐜𝐞𝐦𝐞𝐧𝐭! In unity, let us strengthen our community and move our profession forward, ka-MDF. 🦾⚙

Connect with us!
📩: [email protected]

18/10/2026

16/10/2026

27/09/2026

🏆𝙀𝙁𝙁𝙊𝙍𝙏𝙎 𝙏𝙃𝘼𝙏 𝘿𝙀𝙎𝙀𝙍𝙑𝙀 𝙏𝙊 𝘽𝙀 𝙍𝙀𝘾𝙊𝙂𝙉𝙄𝙕𝙀𝘿.

PSME-MDFTD proudly recognizes 𝙅𝙚𝙯𝙧𝙚𝙚𝙡 𝙁𝙖𝙞𝙩𝙝 𝘾𝙖𝙢𝙖𝙩 𝙤𝙛 𝙋𝙎𝙈𝙀–𝙋𝙖𝙣𝙜𝙖𝙨𝙞𝙣𝙖𝙣 𝙎𝙩𝙖𝙩𝙚 𝙐𝙣𝙞𝙫𝙚𝙧𝙨𝙞𝙩𝙮 𝙎𝙩𝙪𝙙𝙚𝙣𝙩 𝙐𝙣𝙞𝙩 and 𝙅𝙪𝙡𝙞𝙖𝙣 𝙁𝙧𝙖𝙣𝙘𝙞𝙨 𝙆. 𝙁𝙚𝙧𝙧𝙖𝙧𝙞𝙨 𝙤𝙛 𝙋𝙎𝙈𝙀–𝘽𝙞𝙘𝙤𝙡 𝙎𝙩𝙖𝙩𝙚 𝘾𝙤𝙡𝙡𝙚𝙜𝙚 𝙤𝙛 𝘼𝙥𝙥𝙡𝙞𝙚𝙙 𝙎𝙘𝙞𝙚𝙣𝙘𝙚𝙨 𝙖𝙣𝙙 𝙏𝙚𝙘𝙝𝙣𝙤𝙡𝙤𝙜𝙮 𝙎𝙩𝙪𝙙𝙚𝙣𝙩 𝙐𝙣𝙞𝙩 as among our 𝗧𝗼𝗽 𝗩𝗼𝗹𝘂𝗻𝘁𝗲𝗲𝗿𝘀 𝗼𝗳 𝟮𝟬𝟮𝟲⚙️✨

𝙅𝙚𝙯𝙧𝙚𝙚𝙡 contributed as a 𝘾𝙝𝙖𝙩 𝙁𝙖𝙘𝙞𝙡𝙞𝙩𝙖𝙩𝙤𝙧, while 𝙅𝙪𝙡𝙞𝙖𝙣 served as a 𝙏𝙚𝙘𝙝𝙣𝙞𝙘𝙖𝙡 𝙁𝙖𝙘𝙞𝙡𝙞𝙩𝙖𝙩𝙤𝙧, both going beyond participation and actively helping PSME-MDFTD deliver its programs.

🌟 As a special recognition for their valuable contribution, both student volunteers were 𝙖𝙬𝙖𝙧𝙙𝙚𝙙 𝙧𝙚𝙜𝙞𝙨𝙩𝙧𝙖𝙩𝙞𝙤𝙣 to this 𝙮𝙚𝙖𝙧’𝙨 𝙅𝙋𝙎𝙈𝙀 𝙉𝙖𝙩𝙞𝙤𝙣𝙖𝙡 𝘾𝙤𝙣𝙫𝙚𝙣𝙩𝙞𝙤𝙣! 🎟️🏆

This is what PSME-MDFTD hopes to build, a community where volunteers are not only given opportunities to contribute but are also recognized and appreciated for their efforts.

🌟And this could be YOU next
MDFTD will soon open its:
🔹 𝙈𝙚𝙢𝙗𝙚𝙧𝙨𝙝𝙞𝙥 𝙁𝙤𝙧𝙢
🔹 𝙑𝙤𝙡𝙪𝙣𝙩𝙚𝙚𝙧 𝙁𝙤𝙧𝙢
🔹 𝙎𝙥𝙚𝙖𝙠𝙚𝙧/𝙀𝙭𝙥𝙚𝙧𝙩 𝙁𝙤𝙧𝙢

𝘽𝙮 𝙗𝙚𝙘𝙤𝙢𝙞𝙣𝙜 𝙥𝙖𝙧𝙩 𝙤𝙛 𝙈𝘿𝙁𝙏𝘿, you can have opportunities to 𝙘𝙤𝙣𝙩𝙧𝙞𝙗𝙪𝙩𝙚, 𝙘𝙤𝙣𝙣𝙚𝙘𝙩 𝙬𝙞𝙩𝙝 𝙥𝙧𝙤𝙛𝙚𝙨𝙨𝙞𝙤𝙣𝙖𝙡𝙨, 𝙜𝙖𝙞𝙣 𝙚𝙭𝙥𝙚𝙧𝙞𝙚𝙣𝙘𝙚, 𝙖𝙣𝙙 𝙗𝙚 𝙘𝙤𝙣𝙨𝙞𝙙𝙚𝙧𝙚𝙙 𝙛𝙤𝙧 𝙧𝙚𝙘𝙤𝙜𝙣𝙞𝙩𝙞𝙤𝙣 𝙖𝙣𝙙 𝙥𝙤𝙨𝙨𝙞𝙗𝙡𝙚 𝙫𝙤𝙡𝙪𝙣𝙩𝙚𝙚𝙧 𝙞𝙣𝙘𝙚𝙣𝙩𝙞𝙫𝙚𝙨 𝙗𝙖𝙨𝙚𝙙 𝙤𝙣 𝙮𝙤𝙪𝙧 𝙡𝙚𝙫𝙚𝙡 𝙤𝙛 𝙥𝙖𝙧𝙩𝙞𝙘𝙞𝙥𝙖𝙩𝙞𝙤𝙣 𝙖𝙣𝙙 𝙘𝙤𝙣𝙩𝙧𝙞𝙗𝙪𝙩𝙞𝙤𝙣.

🎁 Possible incentives may include:
🏆 Volunteer recognition
🎟️ Free or discounted MDF program registration
🎥 Extended access to event recordings
💻 Discounts on selected MDF programs

Your contribution matters. Your effort can be recognized.

👉 Watch out for the opening of the MDFTD forms and become part of the community.

Volunteer. Contribute.Develop.
⚙️ Be part of MDFTD.

27/09/2026

Our newly conferred 𝗔𝗦𝗘𝗔𝗡 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿 𝗥𝗲𝗴𝗶𝘀𝘁𝗲𝗿 is in the house! 🎉

Congratulations, 𝗘𝗻𝗴𝗿. 𝗪𝘆𝗲𝗿𝗹𝗼 𝗔. 𝗔𝗹𝗰𝗮𝗻𝘁𝗮𝗿𝗮, 𝗔𝗘𝗥, 𝗣𝗠𝗘, the proactive 2nd Vice Chairman!

Your TD Community celebrates this remarkable milestone with you. Here’s to continued excellence and success in the engineering profession!

Kampay!🥂

21/09/2026

📢 𝗡𝗘𝗘𝗗 𝗔𝗦𝗦𝗜𝗦𝗧𝗔𝗡𝗖𝗘? 𝗪𝗘’𝗥𝗘 𝗛𝗘𝗥𝗘 𝗧𝗢 𝗛𝗘𝗟𝗣!

For your inquiries and assistance, you may directly contact the appropriate PSME office representative through the numbers listed in our Inquiries & Assistance Directory.

Whether it’s about 𝗠𝗲𝗺𝗯𝗲𝗿𝘀𝗵𝗶𝗽, 𝗟𝗼𝗴𝗶𝘀𝘁𝗶𝗰𝘀, 𝗗𝗲𝗹𝗲𝗴𝗮𝘁𝗲𝘀, 𝗧𝗗/𝗖𝗣𝗗, 𝗧𝗗 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻, 𝗢𝗠𝗗, 𝗼𝗿 𝗥𝗲𝗴𝗶𝗼𝗻𝗮𝗹/𝗣𝗛𝗜𝗟𝗠𝗔𝗖𝗛 concerns, our team is ready to assist you.

📞 Save these contact numbers for easy reference!

Let’s keep communication accessible, responsive, and connected.

20/09/2026

𝐇𝐞𝐥𝐥𝐨, 𝐊𝐚-𝐌𝐃𝐅!

The 𝐂𝐞𝐫𝐭𝐢𝐟𝐢𝐜𝐚𝐭𝐞𝐬 𝐨𝐟 𝐏𝐚𝐫𝐭𝐢𝐜𝐢𝐩𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐂𝐨𝐦𝐩𝐥𝐞𝐭𝐢𝐨𝐧 𝐟𝐨𝐫 𝐒𝐞𝐬𝐬𝐢𝐨𝐧 𝟒 & 𝟔:: “Computational Fluid Dynamics & Fluid-Thermal Analysis for Mechanical Engineers” have been sent to all registered participants via email.

📌If you have not received yours, please check your Spam/Junk folder first. Should you still be unable to locate it, kindly send us a message through our page chatbox for assistance.

📌Please Take Note: The CPD-accredited points may take some time to be reflected in your CPDAS dashboard. We kindly ask for your patience while the records are being processed and updated.

Thank you for being part of this learning session! We appreciate your participation and commitment to continuous professional development. 🫶🦾

***
Details regarding the Opening of the Membership Drive will be announced soon. Stay tuned for further announcements and updates!

Sponsors:
ADPI ADParametrik, Inc. (https://www.facebook.com/ADParametrikInc)
GAIA Elite Inc. (https://www.facebook.com/gaiaengineering2025)
CAD-IT ( https://www.cadit.com/)

Student Unit Partners:
PSME Pangasinan State University-Student Unit
PSME University of Nueva Caceres-Student Unit
PSME BISCAST-Student Unit

Connect with us!
📩: [email protected]

20/09/2026

Hello, Ka-MDF!

The 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗰𝗮𝘁𝗲𝘀 𝗼𝗳 𝗣𝗮𝗿𝘁𝗶𝗰𝗶𝗽𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗶𝗼𝗻 𝗳𝗼𝗿 𝗦𝗲𝘀𝘀𝗶𝗼𝗻 𝟱: “National Innovation Agenda and Intellectual Property Learning for Mechanical Engineers” have been sent to all registered participants via email.

Please check your inbox and Spam/Junk folder if you have not yet received your certificate.

Thank you for being part of this learning session! We appreciate your participation and commitment to continuous professional development. 🫶🦾

***
Details regarding the Opening of the Membership Drive will be announced soon. Stay tuned for further announcements and updates!

Sponsors:
ADPI ADParametrik, Inc. (https://www.facebook.com/ADParametrikInc)
GAIA Elite Inc. (https://www.facebook.com/gaiaengineering2025)
CAD-IT ( https://www.cadit.com/)

Student Unit Partners:
PSME Pangasinan State University-Student Unit
PSME University of Nueva Caceres-Student Unit
PSME BISCAST-Student Unit

Connect with us!
📩: [email protected]