Esco Philippines

Call Directions Website Contact the business

Esco Philippines Esco is a Singaporean owned company that was established in 1978.

16/09/2026

[NEW ACCESSORY] Better Thermal Separation for Stacked Incubators

When CO₂ incubators are stacked directly on top of one another, heat can transfer between the units and increase the thermal load on the upper incubator.

The new Thermal Break uses a 4 mm Thermoset Polyester composite layer to provide thermal separation between stacked incubators.

It helps to:

• Minimize heat transfer between units
• Reduce thermal load on the upper incubator
• Support more stable temperature conditions within each unit
• Support efficient operation of stacked configurations

Designed specifically for stacking applications, the Thermal Break provides an added layer of insulation between incubators, allowing each unit to maintain its intended operating conditions with less thermal influence from the other.

Better separation. Uninterrupted thermal control. Smarter stacking.

Compliance. Performance. Reliability. We’ve Got You Covered. At Esco, we understand that your laboratory equipment plays...
05/09/2026

Compliance. Performance. Reliability. We’ve Got You Covered.

At Esco, we understand that your laboratory equipment plays a critical role in your work. That’s why our service goes beyond maintenance. We’re here to help keep your laboratory safe, compliant, reliable, and running at its best.

From preventive maintenance, calibration, and validation to genuine spare parts and responsive technical support, our experienced service team delivers the expertise and care you can count on throughout the equipment lifecycle.

Because when your equipment performs at its best, your laboratory can too.

Compliant. Safe. Tested. Trusted. Always Has. Always Will.

𝗦𝗮𝗳𝗲𝗿 𝗜𝗩𝗙 𝘄𝗼𝗿𝗸𝗳𝗹𝗼𝘄𝘀 𝘀𝘁𝗮𝗿𝘁 𝘄𝗶𝘁𝗵 𝘀𝘁𝗿𝗼𝗻𝗴𝗲𝗿 𝗽𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝘀. As IVF laboratories become more complex, traceability, accurate ident...
03/09/2026

𝗦𝗮𝗳𝗲𝗿 𝗜𝗩𝗙 𝘄𝗼𝗿𝗸𝗳𝗹𝗼𝘄𝘀 𝘀𝘁𝗮𝗿𝘁 𝘄𝗶𝘁𝗵 𝘀𝘁𝗿𝗼𝗻𝗴𝗲𝗿 𝗽𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝘀.

As IVF laboratories become more complex, traceability, accurate identification, risk management, and standardized workflows are becoming increasingly important.

The 2026 ESHRE Good Practice Recommendations reinforce the need for effective laboratory practices that support patient safety and quality throughout the IVF workflow.

Technology can play an important role in strengthening these processes.

With MIRI® Evidence, IVF laboratories can support:
- Secure identification
- Automated witnessing
- Comprehensive traceability
- Greater workflow visibility

Because traceability is more than documentation. It’s about creating safer, more consistent workflows at every critical step.

Swipe through to explore how technology-enabled traceability can support modern IVF laboratory practice.

22/08/2026

When cell counting meets electrical impedance technology 🔬

Get faster analysis, accurate cell counts, and a simpler workflow with advanced cell counting technology

Curious to see it in action? Message us to schedule a FREE demo!

May this day remind us of the importance of standing for what is right and continuing to build a better Philippines toge...
21/08/2026

May this day remind us of the importance of standing for what is right and continuing to build a better Philippines together 🇵🇭

The Isotherm® Forced Convection Laboratory Incubator has been successfully installed in Antipolo.Designed for precise te...
20/08/2026

The Isotherm® Forced Convection Laboratory Incubator has been successfully installed in Antipolo.

Designed for precise temperature control and uniform heat distribution, the Isotherm® supports reliable incubation for a wide range of laboratory applications.

Thank you for trusting Esco to support your laboratory needs

How confident are you in your cell counting results? Accurate cell counting is more than obtaining a number—it lays the ...
19/08/2026

How confident are you in your cell counting results?

Accurate cell counting is more than obtaining a number—it lays the foundation for consistent cell culture and reproducible research. Small errors during the counting process can introduce variability that affects downstream applications, from routine cell culture to drug discovery.

In this post, we highlight five common cell counting mistakes that laboratories can avoid to improve consistency and data quality.

👉 Swipe through to see if your workflow is making any of these mistakes.

How does your lab ensure accurate and reproducible cell counting? We'd love to hear your experience in the comments.

16/08/2026

Stack smarter. Service easier.

Our 2-Unit Floor Stand is now available for Esco's 50L CCL CO₂ Incubator.

Compared with stacking brackets, the dedicated floor stand offers:
✔️ Reduced need to lift or separate incubators during servicing
✔️ Easy access for routine maintenance
✔️ Convenient mobility with independent lockable casters

For more information: https://www.escolifesciences.com/downloads/celculture-co2-incubator-combined-catalog

Thank you so much for having Esco as your guest lecturer 💙
15/08/2026

Thank you so much for having Esco as your guest lecturer 💙

If you've worked in pharmaceutical manufacturing, you've probably heard (or even thought) this before:"Laminar airflow i...
12/08/2026

If you've worked in pharmaceutical manufacturing, you've probably heard (or even thought) this before:

"Laminar airflow is the gold standard."

And honestly, it's easy to understand why.

Throughout university, GMP training, and even on social media, we're constantly exposed to examples like:

✔ Biological Safety Cabinets (BSC)
✔ Laminar Airflow Cabinets (LAF)
✔ Aseptic processing
✔ ISO Class 5 critical environments

Since these applications rely on unidirectional (laminar) airflow, it's natural to assume that laminar airflow must always be the superior engineering solution.

But here's the interesting part:

Engineering doesn't ask, "Which technology is the best?". It asks:
"What risk are we trying to control?"

For aseptic manufacturing, the primary objective is protecting the product from contamination. Unidirectional airflow is an effective engineering control because it continuously sweeps particles away from critical processing zones.

However, not every pharmaceutical process has the same objective.

For many non-sterile potent powder handling applications, such as API/HPAPI weighing or dispensing, the engineering priority shifts toward operator protection and containment. In these applications, containment isolators are commonly designed with negative pressure and engineered turbulent airflow to help control airborne particulates while directing exhaust through HEPA filtration.

Same industry. Different process. Different risk. Different airflow philosophy.

So perhaps the better question isn't:
❌ "Which airflow is superior?"
Instead, ask:
✅ "What is this airflow designed to achieve?"

That's where good engineering decisions begin.

What other pharmaceutical engineering concepts do you think are often misunderstood because they're taken out of context?

Address

Unit 1615-1616, 16th Floor, Trium Square Bldg. , 2183 Sen. Gil J. Puyat Avenue Cor. Leveriza St. , Brgy. 37
Pasay City
1300

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm

Telephone

+639178068026

Website

Alerts

Be the first to know and let us send you an email when Esco Philippines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Esco Philippines:

Shortcuts

Share

Category