CIVIL Engineers

CIVIL Engineers TO MAKE THE ...WORLD...BEAUTIFUL.. BY CIVIL ENGINEERING....
(A REAL PROFESSION OF QUALIFIED PEOPLES)

Civil engineering is the oldest of the main branches of engineering. Civil engineers use their knowledge to supervise and plan construction projects such as roads, airports, bridges, canals, tunnels, and wastewater systems. They also collaborate with architects to design and construct various types of buildings. Some other civil engineering endeavors include highways, airports, pipelines, railroad

s, levees, and irrigation and sewage systems. Civil engineers try to design their structures to be functional, efficient and durable. Most of the projects civil engineers are involved with have an impact on the environment. They use their knowledge of the environment to create structures that are not harmful. These structures must also meet building codes and other regulations. Civil engineers are usually contracted for their work and must have their designs approved by city and state officials. They will create a proposal for the job that includes estimation of costs, illustrations of designs, and specifications of the building.

COLOURS we use in our PRODUCTS. (ALL IMPORTED.
29/12/2023

COLOURS we use in our PRODUCTS. (ALL IMPORTED.

Tarrazzo Chips Tiles *Abstract Series*Strength 5000PSI, Thickness 19mm,25mm made with high quality imported colours from...
29/12/2023

Tarrazzo Chips Tiles
*Abstract Series*
Strength 5000PSI, Thickness 19mm,25mm made with high quality imported colours from Germany.
Whatsapp For Booking 03453352526 or Contact on Facebook.

Engineers Just a Reminder ....
06/04/2021

Engineers Just a Reminder ....

Riyadh The Capital of Saudi Arabia.....
10/01/2019

Riyadh The Capital of Saudi Arabia.....

19/12/2018

Fineness Modulus (FM) of Aggregates.
(Every Site Engr should know about this).

The results of aggregate sieve analysis is expressed by a number called Fineness Modulus. Obtained by adding the sum of the cumulative percentages by mass of a sample aggregate retained on each of a specified series of sieves and dividing the sum by 100. The specified sieves are: 150 μm (No. 100), 300 μm (No. 50), 600 μm (No. 30), 1.18 mm (No. 16), 2.36 mm (No. 8), 4.75 mm (No. 4), 9.5 mm , 19.0 mm , 37.5 mm , 75 mm , and 150 mm.



Fineness modulus = 283 ÷ 100 = 2.83

• Index of fineness of an aggregate.

• The fineness modulus of the fine aggregate is required for mix design since sand gradation has the largest effect on workability. A fine sand (low FM) has much higher effect paste requirements for good workability.

• The FM of the coarse aggregate is not required for mix design purposes.

• It is computed by adding the cumulative percentages of aggregate retained on each of the specified series of sieves, and dividing the sum by 100 [smallest size sieve: No. 100 (150 μm)].



• Note: The higher the FM, the coarser the aggregate.

• It is important to note that the fineness modulus is just one number which only characterizes the average size of the aggregate, and different grading may have the same fineness modulus.

Fine Aggregate effect on concrete

• Oversanded (More than required sand)
– Over cohesive mix.
– Water reducers may be less effective.
– Air entrainment may be more effective.

• Undersanded (deficit of sand)
– Prone to bleed and segregation.
– May get high levels of water reduction.
– Air entrainers may be less effective.

• Sand grading
– gap graded or single sized may enhance bleed and segregation. Air entrainment may help fill the gaps.

• Coarse aggregate
– Poor grading may give a harsh mix at low workabilities and segregation at high workabilities.
– Effect on admixtures is small.
– Elongated or flaky aggregates may cause workability difficulties .

19/12/2018

🏢🏭
Civil Site Sub-Engineer ((Job Detail))
• Ensuring the proper quality of work at site.
• Checking and verification of all completed works.
• Checking the mechanism of the consultants for proper supervision of all works
• Perform hot work site inspection and stand by duties.
• Preparation of rates for Non BOQ items.
• Preparation of Site and Engineering Estimates.
• Ensure on time Ex*****on of site without any delay
• Supervise all the construction works like excavation, layout, formwork, reinforcement, placing of concrete, masonry, plaster, flooring, finishing work etc. in building and infrastructure.

• Assess and recommend payment to Subcontractors and Supplies.
• Directly monitor the equipment, materials and manpower requirements of the project.
• Report to the Project Manager regarding the implementation of the project.
• Meetings with the Subcontractors and Contractor's Supervisors and Engineers at site.
• Acts as representative of the contractors at site.
• Quantity measurement and cost estimation.
• Call subcontractors and suppliers and request for quotations.
• Check subcontractors and suppliers billings.
• Layout for excavation as per excavation plan.
• Also involved in liaison and coordinates with Consultants and Clients for inspections.
• Closely coordinate with the client’s representative in the measurement of works.
• To ensure Quality of work as per specification to satisfy Consultant/Client.
• Progress control to complete the project in time.
• Preparation of Demand on daily basis as per requirement at site
• Daily Progress Report of work executed at Site (Quantity of work, Man power, material Consumed etc.)

💐...As-Salaam o Alaikum Wa Rehmatullahi Wa Barakatuhu...💐Hopefully every one who is reading this is fine by the Grace of...
15/09/2016

💐...As-Salaam o Alaikum Wa Rehmatullahi Wa Barakatuhu...💐

Hopefully every one who is reading this is fine by the Grace of Allah Almighty...
🏠(Mehnat Construction Services)🏠
(LINK) :- Fb.com/MehnatConstruction.

Is a small firm founded by uniting few Civil Site Enginners and Foremans.

The main objective of the firm is to aware & provide people with standardized construction service's and to give them free consultancy so that a planned frame of city may emerge which will also have a good and healthy Environment.
(🏬🏪🏫🏤🏢🏦🏧🏤🏧🏥🏢🏡🗼🚎)
.(We mostly provide our services in Pakistan but will also try our best to give free Construction Consultancy Info to our Muslim Brothers around the World)..
💐In Shaa Allah💐

14/04/2016

Question :- What are the reasons for establishing minimum distance between bars and maximum distance between bars?
Book :- Concrete Engineering, Steelworks.
Answer :- In some codes, a minimum distance between bars is specified to allow for sufficient space to accommodate internal vi*****rs during compaction.

On the other hand, the restriction of maximum bar spacing is mainly for controlling crack width. For a given area of tension steel areas, the distribution of steel reinforcement affects the pattern of crack formation. It is preferable to have smaller bars at closer spacing rather than larger bars at larger spacing to be effective in controlling cracks. Hence, the limitation of bar spacing beyond a certain value (i.e. maximum distance between bars) aims at better control of crack widths.

14/05/2015

Knowledgeable Video..
How to make different parts of Foamwork of Building Structure (like Beam, Column etc)..

14/05/2015

Flextural Testing Singularly Reinforced Concrete Beam with Shear Reinforcement...
(MUST WATCH CLIP)..

06/04/2015

Beneficial video for site engineers about how to make different members of a Structure..

Design Methods of Various R. C. C structure Members.. Also Share with your Mates..
27/03/2015

Design Methods of Various R. C. C structure Members.. Also Share with your Mates..

Address

Office On Painsara Gojra Road
Faisalabad

Telephone

+923453352526

Website

Alerts

Be the first to know and let us send you an email when CIVIL Engineers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CIVIL Engineers:

Shortcuts

Share