19/07/2024
**AutoGates Pakistan** locally fabricates tyre killers to provide the highest degree of protection against unauthorized vehicles. These tyre killers are the most appropriate solution for controlling vehicle access from the wrong side. If a vehicle attempts to enter from an unauthorized side, its tyres will burst.
Our tyre killer spikes are designed to control the entry and exit points of a perimeter. Outdoor installations ensure maximum site security and access control flow. Our tyre killers are durable, featuring heavy-duty sharp spikes.
**AutoGates Pakistan** offers standard configurations with various spike positions and installation options. The raised height of the spikes typically ranges from 76 to 100 mm. The load-bearing capacity of the tyre killers is up to 20 tons. These devices are operated through an electric unit, ensuring smooth and fast operation. They can stop a high-speed vehicle, even one carrying a significant load.
The controlling drive unit is hydraulic, and in case of a power failure, the fixed killers can be lifted or lowered manually using an electric motor. The typical raising and lowering time is around 3 seconds, but this can be adjusted for sensitive or emergency situations. The electric motorized unit can be integrated with a wide range of access control devices.
**Operation and Maintenance:**
The tyre killer has two modes: Armed and Unarmed. In the Armed mode, the spikes are raised to damage the tyres of vehicles coming from the wrong or unauthorized side. In the Unarmed mode, the spikes are lowered to allow vehicles to pass in both directions.
Users can switch between the two modes by moving the lever in the box attached to one side. Spikes should be checked for free and obstruction-free movement using manual up and down movement through the lever. Ensure there are no pebbles, debris, or other obstructions in the mechanical parts of the tyre killer.
**In Case of Damage:**
If any spikes are damaged or deformed due to the passage of a vehicle at an angle, they should be hammered back to their original position to ensure free movement.
Please contact us (0321 9242717), if you required any further details in this regard.
