Eckert Cutting Global

27/10/2026

The entire cutting table doesn’t need extraction at the same time.

With Diamond Core Laser, the system focuses exactly where it’s needed — the relevant table section activates automatically as the machine moves through the cutting process.

No manual switching. No unnecessary steps. Just a solution that works in sync with production.

👉 Let’s talk about Diamond Core Laser.
+48 602 267 701

22/10/2026

Fewer process changes. Less part handling. A smoother production flow.

Titan DrillCut combines cutting and drilling in one CNC workflow, helping reduce unnecessary transfers between workstations and keep production moving.

Want to see how this could work in your production? Let’s talk. 📩
+48 602 267 701

21/10/2026

⚠️ What’s the real cost of a part cut incorrectly? It depends on when you catch the mistake.

If the issue is detected right after cutting, you lose material and production time. If it’s only discovered after bending, you’ve already invested in another manufacturing step. And if the problem comes to light during assembly, it could mean remaking the part and delaying the entire production process.

That’s why it pays to define your requirements before the first cut. Which dimensions are critical for assembly? What tolerances does the technical drawing specify? Which surfaces and holes need to align with mating components?

Not every dimension needs a tight tolerance. What matters is identifying the features that are critical to the part’s fit and function. Because when it comes to those features, “almost fits” simply means “doesn’t fit.”

In series production, consistency is just as important. It’s not enough for the first part to meet specifications. The next one must meet them too. And the one after that.

So when choosing a CNC cutting machine, start with the parts you actually produce: material, thickness, geometry and required tolerances. These factors determine the accuracy and repeatability your production process really needs.

The cost of cutting ends when the operation is complete. The cost of a mistake can keep adding up long afterwards.

If “close enough” isn’t good enough for your production, let’s talk about finding the right Eckert cutting machine for your requirements.

08/10/2026

Big capabilities don’t always require a big footprint. 👌

At Eckert, we tailor our cutting machines to the needs of each production facility, from large-scale manufacturing to smaller workshops.

A great example is our latest installation of the Jantar 1500 × 3000 mm. This compact configuration combines plasma and oxy-fuel cutting, while an additional rotary tube cutting system makes it possible to process tubes and pipes as well.

What kind of cutting machine does your production need? Let’s explore the possibilities! 📩
+48 602 267 701

06/10/2026

When more and more parts are being outsourced, sooner or later one question comes up: would it make more sense to cut them in-house?

That’s where Diamond Core Laser can come in.

✅ 3 or 6 kW
✅ 3000 × 1500 mm
✅ compact, open design
✅ and a price point that might surprise you.

Bringing laser cutting in-house means more control over lead times, production planning and the whole process from sheet to finished part.

👉 Thinking about your own fiber laser? Let’s talk about what your production actually needs.

02/10/2026

Material thickness matters. But on its own, it won’t tell you which laser is right for your production.
When choosing the right configuration, you also need to consider the material, part geometry, required edge quality, batch size, and how the machine fits into the overall production process.

That’s why the first question shouldn’t be:
“How many kW?”
It should be:
“What do you want to produce?”

Well…
Diamond Core Laser is available with a 3 or 6 kW laser source.

30/09/2026

The demands in steel construction are continuously increasing – and so are the expectations placed on modern manufacturing processes.

How can cutting, drilling, and further machining steps be combined efficiently? And what difference can an integrated CNC process make in day-to-day production?

👉 Read more:
https://www.schneidforum.de/news/die-anforderungen-im-stahlbau-steigen-kontinuierlich/

Eine Maschine. Ein CNC-Programm. Ein Prozess.

30/09/2026

Six metres for the part. ±60° for the cutting head. Water does the rest. 💧
Opal Waterjet 2000 × 6000 mm with the ProX3D FL support has been installed, commissioned and fully implemented. The machine is already working at our customer’s facility, while we move on to the next project.
Considering waterjet cutting for your parts? Show us the material and geometry, and let’s discuss the right machine configuration for your production.

📩 Send us a message or call +48 602 267 701 — let’s talk about the possibilities.

23/09/2026

Diamond Core Laser is built around a straightforward concept: an open 3000 × 1500 mm table and a 3 or 6 kW laser source.

In practice, this means easy access to the sheet during loading and unloading, while the power can be matched to the material, thickness and type of parts being produced.

Let’s talk about the right Diamond Core Laser configuration for your production.
📞 +48 602 267 701

22/09/2026

Thank you to AS Welding for the invitation to the In-house Fair in Zwickau!

We’re on site and looking forward to welcoming you at AS Welding.

📍 Maxhütte Gewerbering 15, Zwickau

If you’d like to talk about cutting technologies, a planned investment or specific requirements in your production, come and have a chat with us.

Our Eckert representative is on site and ready to discuss your questions and needs in person.

We look forward to seeing you!