Sivik Equip, Omsk (2026)

05/08/2026

STELLAR P + КС-239 + КС-232 Профессионал — комплект для быстрой и точной балансировки колёс.
Он закрывает всю цепочку работы: подъём тяжёлого колеса, установку на вал, точную центровку, фиксацию и балансировку за один цикл.
STELLAR P ускоряет работу за счёт пневматического вала.
КС-232 Профессионал помогает точно отцентрировать диск, в том числе при нестандартном ЦО.
КС-239 снижает нагрузку на мастера при работе с тяжёлыми и крупными колёсами.
Решение для сервисов, которым важны скорость, точность и стабильный результат без возвратов.

STELLAR P + KS-239 + KS-232 Professional is a set for fast and accurate wheel balancing.

It covers the full workflow: lifting a heavy wheel, mounting it on the shaft, precise centering, clamping, and balancing in one cycle.

STELLAR P speeds up the process thanks to the pneumatic shaft.
KS-232 Professional helps center the wheel accurately, including rims with non-standard center bores.
KS-239 reduces the physical load on the technician when working with heavy and large wheels.

A solution for service shops that value speed, accuracy, and stable results without customer returns.

07/05/2026

PGA-4200-NS now comes with three-stage arms! In 2026, SIVIK upgraded its PGA two-post lifts with bottom synchronization. The PGA-4200-NS model has also been updated — now the lift is equipped with TWO PAIRS OF THREE-STAGE ARMS. ⚙️

WHAT DOES THIS GIVE YOUR AUTO SERVICE? 👇

Versatility 🚗
More opportunities to work with different vehicles — from compact cars to wide crossovers and SUVs.

Comfort 🔧
Three-stage arms are easier to position under low and wide vehicles. It is easier for the technician to accurately place the arm at the vehicle’s designated lifting point.

Speed ⏱️
Fewer unnecessary movements when positioning the vehicle on the lift — faster setup, faster start of work.

Precision and safety 🛡️
It is easier to follow vehicle manufacturers’ recommendations for lifting points and reduce the risk of damaging sills and body elements.
Three-stage arms make the lift more convenient, safer and more versatile — helping the service work faster and handle a wider range of vehicles. 💪
You can order the lifts on the official website or from a SIVIK representative in your region! 📩 универсальнее — а значит, помогают сервису работать быстрее и принимать более широкий парк автомобилей.

Выбирайте современное оборудование СИВИК, способное справиться с вызовами современного автопарка!

Заказать подъемники можно на официальном сайте или у представителя SIVIK в вашем регионе!

03/04/2026

Whether it’s an additional service or your main source of income at your shop—for high-quality restoration, you need a reliable wheel-straightening machine!

The Титан ALU Компакт from SIVIK is a machine that combines unique advantages with a well-thought-out design.
Here are the details 👇

✅ Reliable hydraulic cylinders
We’ve solved the leakage problem once and for all! Over a year ago, we changed our manufacturing process: now the seams of the hydraulic cylinders are laser-welded using an industrial robot. Reliability has been confirmed by high-pressure testing!

📊 The statistics speak for themselves: over 900 stands have been produced using the new technology, and only 1% of service requests are related to hydraulic cylinders. This proves that the problem is truly a thing of the past!

✅ Galvanized bridge — significantly stronger and more durable than painted counterparts.
✅ The bridge is adjustable — it’s convenient to work with the cylinder from either side of the wheel; the bridge can be moved and secured with a special stop.
✅ Hydraulic hoses are routed away from the work area and do not interfere with the technician
✅ The most compact in its class — make effective use of every square foot of your workshop

🚗 Wheel alignment season is just around the corner. Be fully prepared for it!исков уже на пороге. Встречайте его во всеоружии!

25/03/2026

INTRODUCING THE NEW PRODUCT OF 2026! 🆕

The PGA-4300E from SIVIK is a well–connected source that knows no boundaries!

With each generation, cars are getting bigger, wider, and more complex. Modern cars require modern lifts!

The new PGA-4300E model from SIVIK offers versatility and ease of use with most types of vehicles. The lift was created in accordance with the development trends of the modern automotive industry!

🔹 Three-section pickups (two pairs of 3+3). Any modern cars can be lifted. Low ground clearance, complex geometry of thresholds, non–standard lifting zones are no longer a quest for your service! The pickup configuration not only speeds up positioning under the car, but also allows you to safely open the doors.

🔹 Wide passage of 2585 mm! +227 mm width ensures a comfortable ride on the lift in any brutal jeep or powerful sports car
If necessary, a new lift can be installed according to the classic dimensions of the PGA-4200E. We have retained two mounting options – with a check-in width of 2585 mm and 2358 mm.

The 4.3-ton load capacity increased by 100 kg closes 99% of the traffic flow. Safety margin is provided for working with heavy off-road vehicles and commercial vehicles.

🔹 The lift is controlled using buttons and a lever on the remote control

The new lift is available in two versions – the PGA-4300E and the shorter version of the PGA-4300KE for lower rooms .

24/03/2026

❗ Today’s vehicle fleet places new demands on service equipment.
Sivik keeps pace with the times and introduces yet another innovation - a powerful upgrade to the popular ПГА-4100-НС!

These lifts are now equipped with three-section lift arms!

The key advantage of three-section lift arms is their ideal adaptation to low ground clearance and complex sill geometry.
Faster positioning without unnecessary adjustments!

🚨 The updated ПГА-4100-НС is ready to meet the challenges of the modern automotive industry!

The lift is available in two versions:
⚡ 3+3 – two pairs of three-section lift arms for maximum efficiency with a wide range of vehicles
⚡ 3+2 – front three-section + rear two-section lift arms.

An upgrade without a price increase! 💸

❓Why have over 1,000 auto service centers chosen the ПГА-4100-НС lifts?

✔ The model is entirely designed and manufactured in Russia by SIVIK. Proven quality at an affordable price.
✔ 2-year manufacturer’s warranty
✔ Removal from the stops on a single column—speeds up customer service
✔ Compact dimensions—fits even in small auto service centers with low ceilings
✔ Optimal lifting capacity of up to 4.1 tons—suitable for most passenger cars and SUVs
✔ Lower synchronization with additional protection against damage and contamination ensures the system’s durability
✔ Reinforced high-profile carriage—evenly distributes the load on the column, increases the rigidity of the support structure, and eliminates misalignment

With new lift arms, the ПГА-4100-НС model has become an even more cost-effective investment!

20/03/2026

Introducing a video review of our latest product – the Зенит-3D 2 wheel alignment stand.
The ТЛ2КС model is ideal for use with a lift, and the mobile cabinet allows you to comfortably organize your workspace.

📌 Key features:

✔️ New modern intuitive interface
✔️ Touchscreen monitor
✔️ New stylish design with illuminated logos
✔️ New units with high-resolution cameras
✔️ Bright large information screens with color animated prompts
✔️ Updated database with new “smart” search and “favorites” filter
✔️ Automated mode with suspension height input

IMPORTANT🚨
The new software is available to all Зенит-3D stand owners! All you need to do is update the program. And it’s absolutely FREE!

❗️REMINDER: there is a special offer for the stand + lift set⚡️

Contact your nearest dealer.

The video is available on RuTube, YouTube, Telegram.

19/03/2026

🚨 Новая услуга для автосервиса — проточка тормозных дисков и барабанов.
И теперь для этого есть новинка SIVIK — станок КС-901 ⚡

Зачем она нужна ❓
Когда диск начинает бить, появляется вибрация на руле и педали тормоза. Проточка возвращает правильную геометрию тормозного диска, убирает биение и помогает тормозам работать ровно — повышая безопасность и комфорт при вождении. Плюс — колодки служат дольше!

🚀 КС-901 — универсальный станок.
Он позволяет работать и с дисками, и с барабанами, поэтому подходит для СТО, где обслуживают самые разные автомобили.

Максимальные размеры обработки:
• диски до 500 мм диаметром и 40 мм толщиной
• барабаны до 300 мм диаметром и глубиной проточки 70 мм

⚙️ Функциональность, которая сразу выделяет станок среди аналогов:
• скорость вращения 180 об/мин
• точная подводка резца — 0,05 мм
• магнитная лампа для освещения
• вместительный ящик для инструментов
• простой и безопасный рабочий блок

⚙ Что входит в комплект КС-901❓
Станок поставляется уже с набором оснастки для работы:
🔹 центровочные конусы и адаптеры для разных дисков и барабанов🔹 проставки, шайбы и крепеж для надежной фиксации детали
🔹 резцы и держатель для точной проточки
🔹 базовый инструмент для настройки и обслуживания

💡 То есть после установки станка можно сразу начинать работать — всё необходимое уже в комплекте.

#сивик #шиномонтаж #оборудованиедляавтосервиса

17/03/2026

ALPHA Luxe is a small—sized and functional balancing device with a monitor. It accommodates a set of functions of older machines at a reasonable price for younger generations.

The machine is for those who choose to do wheel balancing in 1 cycle!

We show and show how smartsonar with automatic adjustment, the laser displays the location of the load, as well as the time it takes to install. automatic devices work only at the place where the load is installed — everything is as simple and convenient as possible for the master ☝️

Are you at ALFA Lux?:
- The procedure for optimizing the tire-disc position with clear machine tool tips
- Maintenance of 3 sets of wheels at the same time
- Balanced wheel reports
- Balancing wheels with a disc diameter up to 26"
- Balancing group for the presence of a Civic motor adapter

The machine is guaranteed for 2 years.

17/03/2026

Introducing a new accessory - the КС-244 lower protective cover! ☄️

🔥 Upgrade your balancing machine for the season!

The accessory is suitable for Galaxy Plus, Gelios, and Gelios (p) models.

What does this upgrade offer❓

✔️ Cleanliness in the workshop. The cover protects the walls from water and dirt that fly off during balancing.
✔️ Speed of work. The cover comes with 4 cone holders! Now the cones, nut/bushing can be placed under your right hand, within easy reach.
✔️ Ergonomics. Fewer unnecessary movements — faster results!

Equipment protection + technician comfort = the perfect combination for a productive season❗️

⏰ Prepare your equipment for the season in advance!

To place an order, please contact the official representative in your region.📲

sivik sivik tiremounting tiremountingequipment serviceequipment balancingequipment

Sivik Equip

05/08/2026

07/05/2026

03/04/2026

25/03/2026

24/03/2026

20/03/2026

19/03/2026

17/03/2026

17/03/2026

Address

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Listing takedown request