modengy_global

Directions Website

modengy_global The Modengy company has developed a technology on reducing friction
and wear with MODENGY anti-friction solid-film coatings.

Effective dry lubrication and protection for the items against corrosion. We are looking for partners all over the world.

👉🏻 Vane pumps are applied in hydraulic systems of the industrial equipment to pump operating fluid, and to create requir...
30/10/2026

👉🏻 Vane pumps are applied in hydraulic systems of the industrial equipment to pump operating fluid, and to create required pressure. Functioning of the whole hydraulic system depends on their stable running.

The vane pump cover forms the end wall of its working cavity, and is directly involved in the mechanism operating. When the rotor is rotating, the plates are sliding along its inner side dividing the cavity into chambers where suction and discharge of the fluid occur in sequence.

❗️In process of operating, continuous contact with the plates leads to gradual wearing of the operating surface of the cover. As a result, gaps between the parts get wider, and internal flow-overs of the fluid happen.

In order to reduce friction and intensity of wearing, MODENGY 1014 anti-friction coating is applied onto the work surfaces of the covers.

Application of MODENGY 1014 on the vane pump covers enables to… 

➕ reduce intensity of wearing of the work surfaces

➕ maintain optimal machining gaps for longer

➕ reduce internal fluid overflows

➕ maintain pump capacity

➕ provide corrosion protection for the components

➕ extend service lifetime of the equipment

Modengy opens a new additional area on applying the coatings in Bryansk 🙌🏻The line is equipped with all required equipme...
12/10/2026

Modengy opens a new additional area on applying the coatings in Bryansk 🙌🏻

The line is equipped with all required equipment to fulfil this works: micro sandblast chambers, pneumatic main lines, supply-and-exhaust ventilation, accessory for preparation the parts surfaces by chemical and mechanical methods, spraying equipment, devices for quality control of the resulting layer.

To follow polymerization modes of the heat-curing coatings, the large-size kilns are installed. They enable to process parts of various configurations.

🤩 Opening of the new area in Bryansk is the next in turn stage of development the Modengy’s industrial infrastructure. The new line increases available capacity on applying anti-friction coatings, and expands the company’s technological capabilities at dealing with the parts of various purposes and sizes.

Glue pan of edgebander In glue pans of edgebanders, glue heating is carried out for following applying it onto the workp...
06/10/2026

Glue pan of edgebander

In glue pans of edgebanders, glue heating is carried out for following applying it onto the workpieces edges.

🟤 In order to prevent the glue from sticking and burning to the glue pan edges, to make cleaning and maintaining it easier, MODENGY 1007 coating with high anti-adhesive properties is used.

MODENGY 1026 coating protects the mandrels of the equipment for thermocontractable labelling 🛡️ Mandrel is a work member...
28/09/2026

MODENGY 1026 coating protects the mandrels of the equipment for thermocontractable labelling 🛡️

Mandrel is a work member of a labeller: it is what a thermocontractable label sleeve is sliding along while being put on a bottle.

👉🏻 In order to provide continuous running of the packing line, and to prevent the label sleeves from wrinkling, MODENGY 1026 coating is applied onto the mandrels.

For a month of operating in continuous mode at maximum load, this coating has demonstrated stable functioning without a single label jamming. At average load of 40,000 labels per 24 hours, service lifetime of the layer before its scheduled refreshing makes at least 1, 200, 000 cycles of broaching.

💯 Application of MODENGY 1026 helps exclude off-schedule stops of the line and manual adjustment of the sleeve, decrease the number of defective items, and keep marketable state of the products as the dry layer neither collects dust nor leaves any traces on a bottle or a label.

Thrust plain bearing pads👇🏻A pad is a working element of a thrust plain bearing. It accepts rotor axial load when a thru...
14/09/2026

Thrust plain bearing pads👇🏻

A pad is a working element of a thrust plain bearing. It accepts rotor axial load when a thrust plate is sliding along its surface.

🔝 MODENGY 1007 coating is applied onto the pad surfaces to reduce friction and wear at the moments of starting and stopping providing high service lifetime of the bearings while running in both oil and water environments.

🔝 MODENGY 1044 anti-friction solid-film coating with molybdenum disulfide and graphite is applied onto the external thre...
04/09/2026

🔝 MODENGY 1044 anti-friction solid-film coating with molybdenum disulfide and graphite is applied onto the external thread of the drill-pipe subs. It is intended to protect the connections operating at high contact loads that are regularly subjected to assembly and disassembly.

As soon as MODENGY 1044 cures, it forms a dry anti-friction layer on metal. The solid lubricating components reduce direct contact of the mating surfaces, and provide smoother movement of the turns relative to each other. Due to this, the risk of thread damaging both at initial assembly and during following screwing and unscrewing cycles gets lower.

👉🏻 This coating also creates a barrier between metal and external environment protecting the surfaces against corrosion during operation, transportation, and storage of the drilling tool.

#

🆕 MODENGY 1031 friction coating has been implemented into processing procedures of one of the leading Russian manufactur...
18/08/2026

🆕 MODENGY 1031 friction coating has been implemented into processing procedures of one of the leading Russian manufacturers of fasteners

Application of MODENGY 1031 friction coating optimizes the mounting process of the critical metal structures.

📌 Applying this product as part of the mass production of bolt sets solves an important task: it prevents the washers from rotating in process of tightening the threaded connection.

Due to this, torque coefficient remains stable, while pre-tightening force gets predictable and controllable.

✈️ St. Petersburg Aviation Forum (SPAF-26) has successfully concluded after three bright days, from June 9 to 11, 2026. ...
18/06/2026

✈️ St. Petersburg Aviation Forum (SPAF-26) has successfully concluded after three bright days, from June 9 to 11, 2026.

At the Forum, the Modengy company demonstrated its innovative solutions, MODENGY anti-friction and functional coatings that are in demand in the modern aircraft industry.

🔩 The actual parts treated with MODENGY coatings – aircraft pistons, turbine blade shanks, gasodynamic bearing petals, and other critical units of the aircraft machinery were presented on Stand No.M6.

The Forum became the area for dialogue on the future of domestic aviation and space industry as well as possibilities for import substitution and strengthening cooperation. For Modengy, taking part in the SPAF-26 is an important step in developing partner connections, and opening new trends for cooperation.

We are sure that the achieved results will become a good start for further innovations and joint projects. See you again at the industry meeting areas!

👋🏻 We invite you to visit the St. Petersburg Aviation Forum and our booth №M6!One of the key events in the aircraft manu...
05/06/2026

👋🏻 We invite you to visit the St. Petersburg Aviation Forum and our booth №M6!

One of the key events in the aircraft manufacturing industry will take place from June 9-11, aiming to promote import substitution and the introduction of domestic developments. Participants will present their cutting-edge solutions, establish business networks, and gain access to unique information on the forum’s topic.

📌On June 11 at 3:30 PM, a session entitled «Aircraft Production, Maintenance, and Repair» will be held, where aircraft manufacturers, airlines, and component suppliers will discuss aircraft import substitution, routine repair, and maintenance. A leading engineer from MODENGY will also present a report describing the advantages and successes of implementing MODENGY antifriction coatings and other modern materials in aircraft manufacturing.

At booth №M6, throughout the exhibition, we will showcase parts with MODENGY coatings, which are in serial use at our customers, discuss the benefits of implementing solid lubrication technology, and share which leading aircraft manufacturers have already approved our materials.

🤝 We look forward to seeing you June 9-11, St. Petersburg, Startovaya St. 6, Building A, 2nd floor, Stand №M6!

🔝 🗣 Yulia Prudnikova, CEO of NPC Modengy, was named one of the country’s top 200 young industrialists.Inclusion in the f...
04/06/2026

🔝 🗣 Yulia Prudnikova, CEO of NPC Modengy, was named one of the country’s top 200 young industrialists.

Inclusion in the federal ranking is recognition of the company’s contribution to the development of domestic high-tech solutions, import substitution, and strengthening the technological sovereignty of Russian industry.

«The company has grown from an ambitious startup into a world-class expert in the production of anti-friction coatings.

This recognition marks a significant milestone in the professional development of the entire team. And for our region, it is further confirmation of the potential of local manufacturing and engineering teams capable of competing at the federal level and contributing to the development of the country’s technological base,» noted Yulia Prudnikova, CEO of NPC Modengy LLC.

👥 The finalists will continue their competition for victory in two stages: the jury’s assessment and the public vote, which begins on June 8 on the awards website. The awards ceremony, attended by Russian Minister of Industry and Trade Anton Alikhanov, will take place in July at the country’s main industrial exhibition, INNOPROM-2026, in Yekaterinburg.

Address

Saint Petersburg

Opening Hours

Monday 09:00 - 18:00
Tuesday 09:00 - 18:00
Wednesday 09:00 - 18:00
Thursday 09:00 - 18:00
Friday 09:00 - 18:00

Alerts

Be the first to know and let us send you an email when modengy_global posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby engineering companies