Cement Factory Group

Grey Cement and White Cement Factory

28/03/2026

Top-tier cement manufacturers focus on producing high-strength, durable products suitable for various construction needs, including structural work, plastering, and specialized precast applications.

We offer both white cement and gray cement at extremely goods rates and we offer world wide shipping to all destination ports.

We have ready stock for immediate shipping, contact us to get the best quotes

1.Vietnam standard (TCVN)
- Quality of Cement as per TCVN 6260 – 2009

2. European standards (EN)
- Certificate I -EN 197-1.2000- CEM II 42,5 R
- Certificate II - En 197-1.2000 CEM II 42,5N
- Certificate III - EN 197-1.2000 CEM I 42,5R

3. American standards (ASTM)
- ASTM C150 TYPE-1
- ASTM C1157 TYPE- GU
- ASTM C1157 TYPE- HE

27/03/2026

Blast Furnace Cement: CEM III/A 32.5 N

Description

Portland blast - furnace slag cement is a blend of Portland Cement and finely ground granulated blast - furnace slag in which the slag portion is between 35% and 64% of the mass of the total Portland Cement clinker and granulated blast - furnace slag in the cement mills.

Standard Specification

It is produced according to the Egyptian standards ES 4756/1-2007 which complies with the European specifications EN 197/1-2000.

Physical and Mechanical Properties

Cement Standard Specifications Limits
Property Tourah Cement Standard Specification Limits
Finenss (Blain) 4600 cm2/gm -
Setting Time (Initial) min 166 Min =60 Min
(Final) - -
Expansion 1mm 10 mm Max
Compressive Strength 7D 27.36 N/mm2 12.3 N/mm2 Min
Compressive Strength 28D 39.28 N/mm2 32.5 N/mm2 Min
Heat of Hydration 7D 50 60 cal/gm Max
Heat of Hydration 28D 60 70 cal/gm Max

Chemical Properties

Cement Standard Specifications Limits
Analysis Tourah Cement Standard Specification Limits
Loss on lgnition 0.65 % 3.0 % Max
Insoluble Residue 0.5 % 1.5 % Max
Sulphate (SO3) 1.14 % 3.0 % Max
Chloride Content (Cl) 0.01% 0.1 % Max
Practical Main Application

Applied in all construction works such as harbor quays & ports which are exposed to chemical effects and has a massive concrete construction. This type of cement is resistant for salts and has low heat of hydration during setting.

Storing

• Cement bags should be stored in a dry place and kept away from a humid environment.
• Bags are stacked over wooden palettes.
• Cement bags should be covered in case of humid & rainy weathers.
• Don’t stuff more than 8 bags over each other.

Validity

• the packing date, provided that it’s properly stored as previously mentioned instructions.
• Cement should be re-tested before use after this period.

26/03/2026

Portland Limestone Cement: CEM II/B-L 32.5 N

Description

It is a composite Portland cement pertains to the main type of CEM II family which contains 19 different kinds of Cements, according to EN 197/1-2000.

Standard Specification

It is produced according to the Egyptian standards ES 4756/1- 2007 which complies with the European specifications EN 197/1-2000.

Physical and Mechanical Properties

Cement Standard Specifications Limits
Property Tourah Cement Standard Specification Limits
Finenss (Blain) 3994 cm2/gm -
Setting Time (Initial) min 165 75
Expansion mm 1 10 max
Compressive Strength 2D - -
Compressive Strength 7D 28.9 N/mm2 16
Compressive Strength 28D 37.9 N/mm2 32.5 min

Chemical Properties

Cement Standard Specifications Limits
Property CEM | 42.5 N Type CEM | 42.5 R Type
Loss on lgnition 8.43 % -
Insoluble Residue 1.2 % 5 %
Sulphate (SO3) 2.2 % 3.50 %
Chloride Content (Cl) 0.074 0.1

Practical Main Application

Applied in general purpose building works, such as masonry mortars, plastering, rendering, pavements and cement products as tiles, bricks, and hollow blocks. As per the EOS restrictions, it’s not for foundations or reinforced concrete works.

Storing

• Cement bags should be stored in a dry place and kept away of humid environment.
• Bags are stacked over wooden Palettes
• Cement bags should be covered in case of humid & rainy weathers.

Validity

• the packing date, provided that it's properly stored as previously mentioned.
• Cement should be re-tested before use after this period.

Packaging

8 Plies craft paper bag each of 50 Kg/bag

25/03/2026

Oil Well Cement: OWC class G-HSR/API 10 A

Tourah Cement operates one of the biggest plants of our Cement, Egypt’s leading cement producer with a market share of more than 30% in grey cement and more than 50% in white cement. Tourah plant has seven dedicated production lines which manufacture different types of cement and clinker. The plant works under the Quality system ISO 9001 that ensures consistency of production and batch traceability.

At the crossroad of Middle East and South Europe, on the Suez Canal, close to the main Egyptian ports, Tourah Cement is strategically located to reach every country of the Mediterranean rim, Middle and Far East.

EXPLORA-G is an oil well cement class G HSR (high sulfate resistant grade) in accordance with API Spec. 10 A. EXPLORA-G and is the ideal solution for oil wells, gas wells, water wells, grouting for offshore platforms.

The 40 years Italian experience in manufacturing oil industry products merges with the Egyptian technological skill to offer EXPLORA-G, the ultimate solution for companies looking for an easy-to-disperse, consistent and performant oil well cement.

25/03/2026

White Cement: CEM I 52.5 N

Description

White Portland cement is a Portland cement that differs from grey cement mainly in colour. It is made of selected raw materials containing negligeable amounts of iron and manganese oxides.

Standard Specification

It is produced according with the Egyptian standards ES 4756/1-2007 and complies with the European specifications EN 197/1-200

Physical and Mechanical Properties

Cement Standard Specifications Limits
Property CEM | 52.5 N Type CEM | 42.5 R Type
Setting Time (Initial) min 110 ≥ 45
Soundness (Expansion) mm 5.3 ≤ 10
Compressive Strength 2D MPa 22.3 ≥ 20
Compressive Strength 28D MPa 55.2 ≥ 52.5
Whiteness % 83.3 82±5

Chemical Properties

Cement Standard Specifications Limits
Property CEM | 52.5 N Type Standard Specification Limits
Loss on lgnition 1.86 % ≤5.0
Insoluble Residue 0.51 % ≤ 5.0
Sulphate (SO3) 2.97 % ≤ 4.0
Chloride Content (Cl) 0.04 ≤0.10
Practical Main Application

It is primary used for architectural and structural purposes such as pre-cast curtain walls and facing panels, terrazzo surfaces, stucco, cement paint, tile grout and decorative concrete. It is recommended wherever white or coloured concrete or mortar if desired. In case of application in concrete, the selection of the aggregates has to be carefully done and the curing time strictly controlled to secure the whiteness of the final product.

Storing

• Cement bags should be stored in a dry place and kept away from a humid environment.
• Bags are stacked over wooden palettes.
• Cement bags should be covered in case of humid & rainy weathers.
• Don’t stuff more than 8 bags over each other.

Validity

• 52 weeks from the packing date, provided that it’s properly stored as previously mentioned instructions.
• Cement should be re-tested before use after this period.

25/03/2026

Portland cement is general purpose cement. It is suitable for all uses where the special properties of other type are not required. It is used where cement concrete is not subject to specific exposures, such as sulphate attack from soil or water.

Standard Specification

It is produced according to the Egyptian standards ES 4756/1-2007

Physical and Mechanical Properties

Cement Standard Specifications Limits
Property CEM | 42.5 N Type CEM | 42.5 R Type
Setting Time (Initial) min ≥ 60 ≥ 60
Soundness (Expansion) mm ≤ 10 ≤ 10
Compressive Strength 2D MPa ≥ 10 ≥ 20
Compressive Strength 7D MPa - -
Compressive Strength 28D MPa ≥ 42.5 ≥ 42.5

Chemical Properties

Cement Standard Specifications Limits
Property CEM | 42.5 N Type CEM | 42.5 R Type
Loss on lgnition % ≤ 5.0 ≤ 5.0
Insoluble Residue % ≤ 5.0 ≤ 5.0
Sulphate (SO3)% ≤ 3.5 ≤ 4.0
Chloride Content (Cl)% ≤ 0.10 ≤ 0.10
Practical Main Application

Its use include reinforced concrete structures, bridges, railway structures, tanks & reservoirs, culverts, pipes, floors, pavements & sidewalks, masonry units.

Storing

• Cement bags should be stored in a dry place and kept away from a humid environment.
• Bags are stacked over wooden palettes.
• Cement bags should be covered in case of humid & rainy weathers.
• Don’t stuff more than 8 bags over each other.
.5N

25/03/2026

We offer White Cement and Gray Portland cement which are both general purpose cement. It is suitable for all uses where the special properties of other type are not required. It is used where cement concrete is not subject to specific exposures, such as sulphate attack from soil or water.

Standard Specification

It is produced according to the Egyptian standards ES 4756/1-2007

1.Vietnam standard (TCVN)
- Quality of Cement as per TCVN 6260 – 2009

2. European standards (EN)
- Certificate I -EN 197-1.2000- CEM II 42,5 R
- Certificate II - En 197-1.2000 CEM II 42,5N
- Certificate III - EN 197-1.2000 CEM I 42,5R

3. American standards (ASTM)
- ASTM C150 TYPE-1
- ASTM C1157 TYPE- GU
- ASTM C1157 TYPE- HE

Physical and Mechanical Properties

Cement Standard Specifications Limits
Property CEM | 42.5 N Type CEM | 42.5 R Type
Setting Time (Initial) min ≥ 60 ≥ 60
Soundness (Expansion) mm ≤ 10 ≤ 10
Compressive Strength 2D MPa ≥ 10 ≥ 20
Compressive Strength 7D MPa - -
Compressive Strength 28D MPa ≥ 42.5 ≥ 42.5

Chemical Properties

Cement Standard Specifications Limits
Property CEM | 42.5 N Type CEM | 42.5 R Type
Loss on lgnition % ≤ 5.0 ≤ 5.0
Insoluble Residue % ≤ 5.0 ≤ 5.0
Sulphate (SO3)% ≤ 3.5 ≤ 4.0
Chloride Content (Cl)% ≤ 0.10 ≤ 0.10
Practical Main Application

Its use include reinforced concrete structures, bridges, railway structures, tanks & reservoirs, culverts, pipes, floors, pavements & sidewalks, masonry units.

Storing

• Cement bags should be stored in a dry place and kept away from a humid environment.
• Bags are stacked over wooden palettes.
• Cement bags should be covered in case of humid & rainy weathers.
• Don’t stuff more than 8 bags over each other.

ที่อยู่

VR48 Tambon San Sai, Mueang Chiang Rai
Chiang Rai
57000

เว็บไซต์

http://Www.Globalexportsmarket.com/

แจ้งเตือน

เป็นคนแรกที่รู้ข่าว: เราจะส่งอีเมลแจ้งเมื่อ Cement Factory Group โพสต์ข่าวสารและโปรโมชั่น อีเมลของคุณจะไม่ถูกนำไปใช้เพื่อวัตถุประสงค์อื่น และคุณสามารถยกเลิกการรับข่าวสารได้ทุกเมื่อ

ต้องการให้ธุรกิจของคุณขึ้นเป็นอันดับหนึ่งในหมวด บริษัทวิศวกรรม ที่ Chiang Rai หรือไม่?

แชร์

หมวดหมู่

บริษัทอุตสาหกรรม