S P Metalwork Co.,Ltd.

20/08/2026

🦺 Safe Crane Operation Starts With Proper Training

A crane is a powerful tool
that helps improve efficiency in industrial operations.
However, without proper knowledge and safe operation,
it can create serious risks in the workplace.

Regular crane training helps employees understand
correct operating procedures,
load handling techniques,
and safety practices before performing actual work.

A well-trained team can reduce accidents,
protect equipment,
and create a safer working environment. 🏭

🏭 S P Metalwork
We believe that quality starts with people.
Through continuous safety training and skill development,
we strengthen our team to work safely and efficiently
while maintaining high standards in iron casting production. 🌎

📞 Tel. 063-554-2426 (Khun Lek)
📞 088-585-2164 (Khun Preaw)
💬 Line:
📧 Email: [email protected]

19/08/2026

Have you ever noticed cloudy or discolored water after a water main or pipeline repair? While it can be concerning, the cause is often temporary and related to changes inside the distribution system.

During maintenance or repairs, the water supply is typically shut off and then restored. This sudden change in flow can disturb sediment, mineral deposits, and tiny particles that have settled inside the pipes over time.

In some cases, air becomes trapped in the pipeline during the repair process. When water service resumes, these tiny air bubbles mix with the water, making it appear cloudy or milky. If the cloudiness is caused by air, it usually clears within a few minutes after the water is left standing.

To restore normal water quality, utilities often perform pipeline flushing, allowing clean water to flow through the system at high velocity to remove loose sediment and trapped particles before returning the pipeline to normal service.

Routine maintenance, proper flushing procedures, and high-quality pipeline components all play an important role in maintaining a reliable and safe water distribution system.

🏭 S P Metalwork

With over 30 years of casting expertise, S P Metalwork manufactures high-quality FC (Gray Cast Iron) and FCD (Ductile Cast Iron) products for waterworks and industrial applications. Certified to TÜV NORD standards, we provide reliable valves, fittings, and OEM casting solutions for customers across Thailand and international markets.

📞 Tel: +66 63-554-2426 (Khun Lek)
or +66 88-585-2164 (Khun Preaw)

💬 Line:

📧 Email: [email protected]

18/08/2026

🔥 Custom Iron Casting Solutions 🏭

S P Metalwork provides OEM iron casting services
with expertise in FC and FCD cast iron grades
for various industrial applications.

With over 30 years of casting experience,
we support customers from casting process planning,
material quality control,
to final product inspection before delivery.

✅ Custom casting based on customer drawings
✅ FC & FCD cast iron production
✅ Support for water supply equipment, machinery parts, and industrial components
✅ Quality control throughout the manufacturing process

From concept to finished products,
S P Metalwork is your trusted casting partner
for reliable and high-quality iron casting solutions.

🏭 S P Metalwork
A specialist in FC / FCD iron casting and OEM manufacturing
with over 30 years of experience.
We are committed to delivering quality products
that meet customer requirements and support both
domestic and international markets.

📞 Tel. 063-554-2426 (Khun Lek)
or 088-585-2164 (Khun Preaw)

💬 Line:

📧 Email: [email protected]

17/08/2026

Why Flush Water Pipes Regularly? 💧

Water pipes need regular flushing
to remove accumulated sediment, deposits,
and unwanted particles inside the pipeline.

✅ Improve water quality
Helps maintain cleaner water
and reduces contamination risks

✅ Remove sediment buildup
Preventing blockages and maintaining smooth water flow

✅ Maintain system efficiency
Helps pipes and equipment operate effectively
with better water circulation

✅ Extend pipeline lifespan
Regular maintenance reduces corrosion
and prevents long-term damage

Proper pipe flushing is an important part
of water system maintenance, ensuring a reliable
and efficient water supply for long-term use.

🏭 S P Metalwork
A manufacturer and OEM casting partner specializing in FC and FCD cast iron products
for water supply systems and industrial applications.
With over 30 years of casting experience,
we focus on quality, reliability, and international standards
to deliver trusted solutions for customers worldwide.

📞 Tel. 063-554-2426 (Khun Lek)
or 088-585-2164 (Khun Preaw)

💬 Line:

📧 Email: [email protected]

16/08/2026

💧 Why Divide Water Systems Into Zones?

A well-designed water system
is not only about delivering water,
but also about maintaining stable pressure
and reliable performance.

Dividing a water distribution system into zones
helps control water pressure more effectively.
Each area can be managed according to its elevation,
water demand, and operating conditions.

This approach helps reduce pressure fluctuations,
minimize water loss,
and make maintenance easier when problems occur.

A properly zoned system
creates a more efficient, reliable,
and sustainable water supply network. 💧

🏭 S P Metalwork
A specialist in FC & FCD iron casting
with over 30 years of casting experience.
Certified by TUV NORD, we focus on quality control
throughout every production process
and provide reliable solutions for water systems
in both domestic and worldwide markets. 🌎

📞 Tel. 063-554-2426 (Khun Lek)
📞 088-585-2164 (Khun Preaw)
💬 Line:
📧 Email: [email protected]

15/08/2026

🔍 Why Inspect Water Systems Regularly? 💧

A water system may appear to work normally,
but hidden problems can develop over time.
Regular inspection helps detect issues early
and prevents major damage in the future.

✅ Identify leaks quickly
Reducing water loss and unnecessary repair costs

✅ Maintain stable water pressure
Helping prevent pipe damage and system failures

✅ Extend equipment lifespan
Regular checks of valves, pipes, and fittings
keep the system operating efficiently

✅ Ensure reliable water supply
A well-maintained system provides confidence
for safe and continuous operation

🏭 S P Metalwork
A manufacturer and OEM casting partner specializing in FC and FCD cast iron products
for water supply systems and industrial applications.
With over 30 years of casting experience,
we focus on quality, reliability, and international standards
to deliver trusted solutions for customers worldwide.

📞 Tel. 063-554-2426 (Khun Lek)
or 088-585-2164 (Khun Preaw)

💬 Line:

📧 Email: [email protected]

14/08/2026

13/08/2026

Why Install Valves Along the Pipeline?

Valves are installed
at key points in a pipeline
to control water flow,
isolate sections for maintenance,
and minimize service interruptions.
Proper valve placement
improves system reliability,
reduces repair time,
and helps protect the entire water network.

🏭 S P Metalwork

Manufacturer and supplier of high-quality cast iron waterworks products.
The products shown are examples of our casting capabilities.
We also provide OEM castings in FC and FCD grades,
manufactured under a TÜV NORD certified quality management system.
Committed to delivering reliable solutions for waterworks and industrial applications.

📞 Tel. +66 63-554-2426 (Khun Lek)
or +66 88-585-2164 (Khun Priao)

💬 Line:

📧 Email: [email protected]

12/08/2026

💙 CSR ส่งต่อน้ำใจ ทุกเดือน

เพราะการดูแลสังคม
เริ่มต้นได้จากการแบ่งปัน
เอส พี เมตัลเวอร์ค
ร่วมบริจาคน้ำดื่มให้วัดเป็นประจำทุกเดือน
เพื่อสนับสนุนกิจกรรมของพระสงฆ์
และอำนวยความสะดวกแก่ผู้มาทำบุญ
พร้อมส่งต่อความห่วงใยคืนสู่สังคมอย่างต่อเนื่อง

🏭 เอส พี เมตัลเวอร์ค

เราเชื่อว่าการเติบโตของธุรกิจ
ต้องควบคู่ไปกับการสร้างคุณค่าให้สังคม
จึงมุ่งมั่นดำเนินกิจกรรม CSR อย่างต่อเนื่อง
พร้อมผลิตและส่งมอบสินค้าคุณภาพมาตรฐาน
เพื่อสร้างประโยชน์ทั้งต่ออุตสาหกรรมและชุมชน

📞 โทร. 063-554-2426 (คุณเล็ก)
หรือ 088-585-2164 (คุณเปรี้ยว)

💬 Line:

📧 Email: [email protected]

#เพื่อสังคม #บริจาคน้ำดื่ม #ทำบุญ #โรงหล่อเหล็ก #อุตสาหกรรมไทย #ตอบแทนสังคม

11/08/2026

🚰 ประตูน้ำเหล็กหล่อ มาตรฐานที่วางใจ

ประตูน้ำเหล็กหล่อ
เป็นอุปกรณ์สำคัญในระบบประปา
ใช้สำหรับเปิด-ปิดการไหลของน้ำ
ช่วยควบคุมการจ่ายน้ำได้อย่างมีประสิทธิภาพ
แข็งแรง ทนทาน
รองรับการใช้งานได้ในระยะยาว
เหมาะสำหรับงานระบบประปาและงานอุตสาหกรรม

🏭 เอส พี เมตัลเวอร์ค

ผู้ผลิตและจำหน่ายอุปกรณ์ระบบประปาเหล็กหล่อมาตรฐาน
สินค้าที่นำเสนอเป็นตัวอย่างผลงานการหล่อของบริษัท
พร้อมรับหล่อเหล็กตามแบบ (OEM) เกรด FC และ FCD
ภายใต้ระบบบริหารคุณภาพมาตรฐาน TÜV NORD
มุ่งมั่นผลิตสินค้าคุณภาพ เพื่อรองรับทั้งตลาดในประเทศและต่างประเทศ

📞 โทร. 063-554-2426 (คุณเล็ก)
หรือ 088-585-2164 (คุณเปรี้ยว)

💬 Line:

📧 Email: [email protected]

#ประตูน้ำเหล็กหล่อ #อุปกรณ์ประปา #รับหล่อOEM #ระบบประปา