“Sumygazmash” Company, that we have honor to present, is Ukrainian serial manufacturer of machines of different types and gas-engineering equipment including movable automobile gas filling trucks and compressor equipment and spare parts. In particular, we are the serial producer of model range (for any inlet pressure) of modern small-size gas-refueling compressor stations (AGNKS), dispensers KPG
-2 and KPG-2 performance 01 and other gas equipment. Integrated equipment allows make stations with productivity of 40-1000 refuels a day.
“Sumygazmash” Company is a designer and manufacturer of the components parts for AGNKS equipment: compressors, inter-stage cooling system, dispensers, automatic control system, solenoid valves, ball valves, check and safety valves, gas drying system and other. All AGNKS models are designed for refueling cars, buses, special vehicles and agricultural vehicles with compressed natural gas (methane). By means of AGNKS the gas is compressed to pressure of 220-250 kgf/cm2. After that it is fueled into a vehicle pressure vessel as ready to use motor fuel. Our AGNKSs are being successfully operated for many years in Ukraine, Russia, Uzbekistan, Tajikistan, Georgia, Armenia and Moldova. The quality system of the plant complies with ISO 9001:2008 regulations and is confirmed by certificate UA226689 issued Beurau Veritas on September 3, 1999. JSC PEC “Sumygazmash” has permission to start works #104.02.59-73.10.0 and permission to carry out specific type of works #62.03.30-29.56.4 issued by the Ukrainian Industry supervisory authority. All AGNKSs are certified for compliance in Russia # POCC UA.АЯ45.B04588 and permission for application issued by the Federal mining and industry supervision authority of Russia БК-12900. Unlike huge CNG stations out AGNKSs are easily located on small territory within living settlement near roads and highways. AGNKSs can be connected to city gas pipelines of any pressure, as well as to main gas pipelines. Besides that AGNKSs can be installed on low pressure wells, coal-bed methane mining wells performing their main task – production of motor-gas fuels and simultaneously degassing coal layers; they also can be installed on crude oil wells with by-passing methane. In order to moth the station is had to be placed on prepared foundation and connected to gas pipeline and electricity network. Water is not used for technological purposes. Gas and the compressor are air-cooled. Heating is not required in technological facilities. Automatics system controls the station working parameters, automatic start and switch off, also automatic shut down of the station if the working parameters exceed their limits. Our company carries out all types of activities on installation of AGNKS: supply of equipment, mounting, balancing, commissioning, guarantee service and repairs, after guarantee service, assistance in project development, trains customers and working staff and other services. AGNKS equipment set consists of compressor block, block of compressed gas accumulators, ramp with posts of simultaneous refueling of 10 vehicles, dispenser, inlet cock-valves block, control system and electric equipment, cable and pipe lines, compressor installation, drying block, air cooling unit, fittings and instruments. Compressor is W-type 5-stage piston compressor with limited lubricant. It is equipped with necessary protecting devices on gas and electric current. Electric drive of the compressor is explosion proof. Block of accumulators is installed out of container and cylinders fastened on frame.
