VPL 主要经营真空配件和设备

AII GPR-1500 GB / GPR-2500 GB Oxygen Monitorshttps://www.vplcorp.com/product/aii-gpr-1500-gb-gpr-2500-gb-oxygen-monitors...
03/20/2023

AII GPR-1500 GB / GPR-2500 GB Oxygen Monitors
https://www.vplcorp.com/product/aii-gpr-1500-gb-gpr-2500-gb-oxygen-monitors/
The AII GPR-1500 GB and GPR-2500 GB oxygen monitors measure oxygen in glove boxes ranging from air (21% O2) down to low levels (0-10 ppm O2).
The GPR-1500 GB is used for trace oxygen measurements as low as 0.1 ppm oxygen in various background gases. The sensor is housed in a stainless steel case that can be screwed into place.
The GPR-2500 GB is used for oxygen measurements from 21% down to 100 ppm oxygen in a range of gas backgrounds. The analyzer or remote sensors can be connected directly on the glove box using a KF-40 fl**ge. In the remote version, the oxygen sensor can be placed in the glove box using the sample/calibration module.
The sensors are designed to avoid potential weaknesses common in typical galvanic cell design. Each sensor type has been specifically engineered to provide the optimum balance between performance and longevity for individual applications. In the absence of oxygen, the sensor will produce zero output. The sensor is linear up to 100%, and in most cases only a span calibration is required.
For applications with a background gas containing more than 0.5% CO2, the specially designed XLT sensor should be selected. The sensor has a special electrolyte formula that can operate in temperatures as low as -10°C.

Edwards nXDS6i Dry Scroll Vacuum Pump, 3.6 CFM 100 – 127 V, 200 – 240 V, Single Phase, 50/60 Hz, A73501983https://www.vp...
03/20/2023

Edwards nXDS6i Dry Scroll Vacuum Pump, 3.6 CFM 100 – 127 V, 200 – 240 V, Single Phase, 50/60 Hz, A73501983
https://www.vplcorp.com/product/edwards-nxds6i-dry-scroll-vacuum-pump-3-6-cfm-100-127-v-200-240-v-single-phase-50-60-hz/
This new nXDS6i dry scroll pump range from Edwards has exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features. The Edwards nXDS6i is the best performing pump in its class. The nXDS6i is up to 20 times quieter than other pumps. Its intelligent control functions and up to five year service interval offer low cost of ownership, making it the small dry pump of choice for today’s most advanced technologies.

The Edwards nXDS-6i, nXDS 6i, pumps are truly dry vacuum pumps as all the bearings, with their hydrocarbon lubricant, are isolated from the vacuum space. The nXDS6i is the next generation in completely oil free, dry scroll pumps and replaces the XDS5. nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimized pumping performance globally. nXDS pumps are designed to be completely field serviceable.

Quality 180mm Wet Film Applicator with Slurry Guiding Platehttps://www.vplcorp.com/product/quality-180mm-wet-film-applic...
03/20/2023

Quality 180mm Wet Film Applicator with Slurry Guiding Plate
https://www.vplcorp.com/product/quality-180mm-wet-film-applicator-with-slurry-guiding-plate/
Coating width: 180mm
Material: 304 stainless steel
Product description: 180 mm standard width. Built in slurry guiding plate to make film coating at easy. Make wet film thickness between 0 – 5000 microns. Micrometer head’s controllable accuracy is 10 microns.

180mm Film Applicator – This unique wet film applicator features micrometer heads for knife blade adjustment.

The operator sets the blade clearance by adjusting the micrometers. This is excellent tool to make quality film for material research laboratories to make ceramic tape casting, battery electrodes, and various coating at lower cost. Stainless steel knife blade with precision ground edge.

Quality 180mm Wet Film Applicator with Slurry Guiding Plate Wholesale Directory. Our Quality 180mm Wet Film Applicator with Slurry Guiding Plate for wholesalers, importers, manufacturers and wholesale products.

Panametrics Replacement OX-1 Oxygen Sensorshttps://www.vplcorp.com/product/panametrics-replacement-ox-1-oxygen-sensors/S...
03/14/2023

Panametrics Replacement OX-1 Oxygen Sensors
https://www.vplcorp.com/product/panametrics-replacement-ox-1-oxygen-sensors/
Sensors available:

OX-1: Standard ppm sensor
OX-2: Acid gas resistant ppm sensor
OX-3: Standard percent sensor
OX-4: Acid percent sensor
OX-5: Standard ppm sensor (minimum measurement of 5 ppm)
Replacement oxygen sensors for Panametrics oxygen transmitters. Sensors available:

OX-1: Standard ppm sensor, 0 to 10, 20, 50 ppm, minimum measurement is 0.2 ppm
OX-2: Acid gas resistant sensor for O2, 0 to 10, 20, 50, 100, 200, 500, 1000 ppm, minimum measurement is 0.2 ppm
OX-3: Standard percent sensor, 0 to 1, 2, 5, 10, 25, 50%, minimum measurement is 0.01 (100ppm), accuracy reduced in the range above 50%
OX-4: Acid gas resistant sensor for % O2, 0 to 1, 2, 5, 10, 25, 50%, minimum measurement is 0.01 (100ppm), accuracy reduced in the range above 50%
OX-5: Standard ppm sensor, 0 to 100, 200, 500, 1000, 2000, 5000, 10000 ppm, lower cost version of the OX-1, minimum measurement is 5 ppm.
10,000 ppm = 1%; % sensor recommended for this range, for 2000 and 5000 ppm ranges any sensor can be used

Shop high quality Panametrics Replacement OX-1 Oxygen Sensors with low price and free shipping all over the world.

Teledyne oxygen sensor B-2C PART No. C6689-B2C
03/14/2023

Teledyne oxygen sensor B-2C PART No. C6689-B2C

Teledyne oxygen sensor B-2C PART No. C6689-B2C Wholesale Directory. Our Teledyne oxygen sensor B-2C PART No. C6689-B2C for wholesalers, importers, manufacturers and wholesale products.

Glove Box Glove Ports, One Pair,Standard 8.6” (220mm) for 8” Gloveshttps://www.vplcorp.com/product/glove-box-glove-ports...
02/09/2023

Glove Box Glove Ports, One Pair,Standard 8.6” (220mm) for 8” Gloves
https://www.vplcorp.com/product/glove-box-glove-ports-one-pairstandard-8-6-220mm-for-8-gloves/
Key Features

Two-component assembly allows for easy removal and replacement with interchangeable parts
Two retaining rings create a tight seal between the glove port and the smooth surfaces of the glove box
Material: Hard aluminum alloy or Polyaldehyde. Other materials upon request

Glove Box Glove Ports, One Pair,Standard 8.6'' (220mm) for 8'' Gloves Wholesale Directory. Our Glove Box Glove Ports, One Pair,Standard 8.6'' (220mm) for 8'' Gloves for wholesalers, importers, manufacturers and wholesale products.

Edwards RV12 Chemical Rotary Vane Dual Stage Mechanical Vacuum Pump. PFPE Oil Prepared, A65509906https://www.vplcorp.com...
02/09/2023

Edwards RV12 Chemical Rotary Vane Dual Stage Mechanical Vacuum Pump. PFPE Oil Prepared, A65509906
https://www.vplcorp.com/product/edwards-rv12-chemical-rotary-vane-dual-stage-mechanical-vacuum-pump-pfpe-oil-prepared-a65509906/
The Edwards RV12F dual stage rotary vane mechanical vacuum pumps offer excellent ultimate pumping speed and have superior v***r handling capabilities while operating quietly. The Edwards RV F series pumps are factory prepared for chemical inert PFPE vacuum pump oil for oxygen-safe and chemical applications (PFPE oil is not included but sold separately, requires Fomblin YVAC 06/6 or Krytox 1506). They are very reliable and have accessories to match any application, including use with refrigeration, dehydration, brake line evacuation, epoxy degassing, sterilization, mass spectrometry, vacuum ovens, lasers, backing combinations, thin film coating, vacuum distillation, freeze drying, space research and other vacuum processes. These Edwards RV5F have a pumping speed displacement at 60 Hz of 10 CFM and an ultimate pressure of 1.5×10-3 Torr and require 1-phase 115 or 220 VAC switchable (currently set to 115 VAC). These Edwards RV12F vacuum pumps are new, factory prepared for Fomblin YVAC 06/6 and Fomblin 1506 PFPE oil, and have Edwards part number A655-09-906 (A65509906).

Unequal Tee, Branch Reducer, KF 50/ KF 40, NW 50/ NW 40, Stainless Steel Vacuum Hardwarehttps://www.vplcorp.com/product/...
01/12/2023

Unequal Tee, Branch Reducer, KF 50/ KF 40, NW 50/ NW 40, Stainless Steel Vacuum Hardware
https://www.vplcorp.com/product/unequal-tee-branch-reducer-kf-50-kf-40-nw-50-nw-40-stainless-steel-vacuum-hardware/
A: 3.15 in / 80 mm
B: 2.65 in / 67.3 mm
C: 2.95 in / 75 mm
D: 2.17 in / 55 mm
E: 2 in / 50.8 mm
F: 1.5 in / 38.1 mm
The fl**ges, or the vacuum fl**ge fittings, are available in the following sizes KF10, KF-16, KF-25, KF-40, KF-50 with corresponding fl**ge sizes NW-10, NW-16, NW-25, NW-40.
Unequal tees, branch reducers, are made out of stainless steel. These assemblies consist of two fl**ges, a centering ring, and an aluminum clamp. A uniform application of pressure on the clamp insures a vacuum seal. The mating fl**ge surfaces compress the o-ring, which is held in place by a metal centering ring, to generate vacuum seal.

Glove Box Glove Ports, One Pair,Standard 8.6” (220mm) for 8” Gloveshttps://www.vplcorp.com/product/glove-box-glove-ports...
01/05/2023

Glove Box Glove Ports, One Pair,Standard 8.6” (220mm) for 8” Gloves
https://www.vplcorp.com/product/glove-box-glove-ports-one-pairstandard-8-6-220mm-for-8-gloves/
The standard glove ports made of hard aluminum allow, stainless steel or plastics to accommodate a variety of glove and sleeve combinations. There are two slots on the port to retain gloves. On the other end, there is a threaded ring to lock the port with contact surface during installation.

Key Features

Two-component assembly allows for easy removal and replacement with interchangeable parts
Two retaining rings create a tight seal between the glove port and the smooth surfaces of the glove box
Material: Hard aluminum alloy or Polyaldehyde. Other materials upon request
Typical Applications

Create oxygen-free and moisture-free environment for organometallic chemistry, organic synthesis, hydrophilic chemical handling, medical devices, electronic component handling, lithium battery handling, solar cell assembly, hemoglobin and metabolic research, catalyst handling, medicine synthesis, nuclear industry, membrane of organic EL preparation, etc.

Glove Box Glove Ports, One Pair,Standard 8.6'' (220mm) for 8'' Gloves Wholesale Directory. Our Glove Box Glove Ports, One Pair,Standard 8.6'' (220mm) for 8'' Gloves for wholesalers, importers, manufacturers and wholesale products.

Glove box Copper Catalyst
01/05/2023

Glove box Copper Catalyst

Shop quality Glove box Copper Catalyst with low price and free shipping all over the world.

Michell Instruments Easidew Online Monitorhttps://www.vplcorp.com/product/michell-instruments-easidew-online-monitor/• 2...
01/05/2023

Michell Instruments Easidew Online Monitor
https://www.vplcorp.com/product/michell-instruments-easidew-online-monitor/
• 2-wire loop powered connection
• Dew point or ppm moisture content
• NEMA 4, IP66
• Excellent sensor protection
• Measurement range -100 to +20°C (-148 to +68°F)
• Operating temperature -40 to +60°C (-40 to +140°F)
• Fast response

Shop quality Michell Instruments Easidew Online Monitor with low price and free shipping all over the world.

Address

750 Sherman Street Se
Albany, OR
97321

Alerts

Be the first to know and let us send you an email when VPL posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to VPL:

Share