S&S Technical, Inc.

11/03/2026

VerssaLoad™ Railcar & Truck Loading Systems – Complete Solutions from One Source!

Why settle for a basic loading rack when you can have a fully integrated loading system designed, fabricated, automated, and tested under one roof?

At S&S Technical, Inc., our VerssaLoad™ Railcar Loading Packages and Truck Loading Systems go beyond traditional loading racks by integrating the equipment needed to safely and efficiently transfer products into one complete, modular solution.

Our custom-engineered VerssaLoad™ packages can include:

✅ Integrated custody transfer metering skids
✅ Pumps, compressors, filtration, and process piping
✅ Loading arms, access gangways, and fall protection systems
✅ Ground verification and overfill protection
✅ Emergency shutdown systems and automated controls
✅ PLC/HMI controls, instrumentation, and electrical integration
✅ Operator platforms, canopies, and LED lighting
✅ PE-stamped engineering drawings and structural calculations

The S&S Technical Advantage?

Instead of coordinating multiple vendors for loading racks, piping, electrical, controls, and safety equipment, you work with one experienced team from concept through completion.

Our VerssaLoad™ systems are assembled and factory acceptance tested (FAT) before shipment, then delivered in modular sections designed to simplify field installation, reduce contractor coordination, and accelerate startup.

Whether you're loading chemicals, refined fuels, ethanol, renewable fuel feedstocks, LPG, NGLs, or other industrial liquids, we can develop a solution tailored to your facility's requirements.

One Source. One Integrated System. Less Time in the Field.

📞 678-250-9507

Learn more about VerssaLoad™: https://www.skidsolutions.com/verssa-load-loading-system/

10/29/2026

Truck & Railcar Loading Racks | Complete Terminal Facility Loading & Unloading Solutions

One Partner. Complete Solutions. Built for Your Application.

At S&S Technical, Inc., we design, engineer, fabricate, and automate complete truck and railcar loading/unloading systems for terminal facilities across a wide range of industries.

From petroleum products and chemicals to renewable fuels, fatty acids, edible oils, and other specialty liquids, every application comes with unique handling requirements. Our team delivers custom-engineered solutions designed for safety, accuracy, efficiency, and long-term reliability.

Our integrated loading rack systems bring together everything needed for a complete loading or unloading operation, including:

✅ Truck and railcar loading racks and access platforms

✅ Pumping and custody transfer metering skids

✅ Loading arms, hoses, and transfer connections

✅ Heat tracing and insulation for temperature-sensitive products

✅ PLC automation, batch controllers, and terminal controls

✅ Ground verification, overfill protection, and emergency shutdown systems

✅ Safe access gangways, fall protection, and spill containment

Applications include: Fatty acids, renewable diesel feedstocks, soybean oil, distillers corn oil, biofuels, crude oil, refined fuels, LPG/NGL, industrial chemicals, and many other liquid products.

Unlike traditional loading rack suppliers, S&S Technical provides more than just the steel structure. We integrate the mechanical, electrical, piping, metering, and automation systems into a complete solution.

With in-house engineering, fabrication, automation, and factory acceptance testing (FAT), we help reduce installation time, simplify project management, and minimize the need for multiple vendors.

Whether you're building a new terminal facility, expanding loading capacity, or upgrading existing truck and railcar loading/unloading operations, S&S Technical has the experience and capabilities to deliver a solution built around your needs.

📞 Call: 678-250-9507 - Request a quote - https://www.skidsolutions.com/request-quote/

10/27/2026

Additive Injection. Built Around Your Operation. Red dye / Lubricity / Jet fuel anti-static.

Small quantities of additive can make a significant difference in the fuel moving through your facility. Whether you are injecting red dye into diesel, adding a lubricity improver, or dosing an approved anti-static additive into jet fuel, reliable delivery and accurate control matter.

S&S Technical designs and builds additive injection skids around your product, operating conditions, and facility - from compact pump packages to complete systems with additive storage, controls, and spill containment.

Read more on our Oct. newsletter on system spotlight - fuel additive systems - https://www.skidsolutions.com/blog/additive-injection-skids/

10/23/2026

A client contacted us with an emergency compressor need. They had a unit go down and need a replacement fast. Factory lead times for this compressor were outside of 8 weeks. The S&S Technical, Inc. Service Center was able to build out a complete refurbished compressor in just a few days. Assembled and tested in accordance with factory standard and included an 18-month workmanship warranty.

Because we have the largest new and used parts inventory in the country, we can do things others can't! With just over 35 years of combined compressor experience, and a shop that overhauls more than 80 compressors per year, you won 't find a better team to work with.

If you looking for a reliable partner to work with for your Blackmer or Corken reciprocating compressors, look no further that S&S Technical. Give us a call - 678-250-9507.

More info on our Compressor & Pump Service - https://www.skidsolutions.com/gas-compression/blackmer-corken-service-rebuild-recertification/

10/20/2026

Alaska demands more from a loading system - and from the team designing it.

S&S Technical designed this custom enclosed skid package now in production to support diesel and methanol truck loading operations in Alaska, integrating pumping, metering, and controls inside a modified 40-foot shipping container.

The package also includes a partitioned office and warming area, giving operators a dedicated space sheltered from the conditions outside. With an ambient design range reaching −50°F, equipment selection, layout, heating, and maintenance access all matter.

Specified components include:
• Kontro centrifugal pumps with 50 HP motors
• Endress+Hauser Coriolis meters and process instrumentation
• Guidant AccuLoad IV loading controls and flow control valves
• Dixon hose handlers for truck connections
• Chromalox heating for the process equipment area

Bringing these components together takes more than fitting equipment into a container. The package must work around the products being transferred, the site conditions, and the people operating and maintaining it.

That’s where S&S Technical brings value:
Custom engineering, fabrication, and automation developed around the application.

From enclosed pumping and metering packages to truck and rail loading systems, we build solutions around each customer’s requirements.

Have an application that calls for a custom approach? Let’s talk - 678-250-9507

Learn more on Truck Loading-Unloading Skids - https://www.skidsolutions.com/custody-transfer-metering-systems/tanker-truck-loading-offloading-skids/

+Hauser Group Measurement Valve

10/15/2026

Asphalt Transloading - Built to Move More Than Product

Hot asphalt is not an easy product to transload. Maintaining temperature, moving a high-viscosity product reliably, providing safe railcar access, and keeping the entire operation mobile requires more than assembling components on a trailer.

S&S Technical asphalt transloaders bring the complete system together in one engineered package.

At the heart of this system is a 6-inch BearCat pump, integrated with heated process piping required for asphalt service. The designs shown are rated for temperatures up to 400°F.

On the railcar side, we paired the process system with a 4-inch Dixon traced/insulated top loading arm with arm lock. An overfill probe is integrated directly into the loading-arm assembly for another layer of operational protection.

And because the equipment is only part of the system, S&S integrates the entire package:
• BearCat pump technology
• Dixon loading arm
• Green railcar gangway
• Heated asphalt piping
• VFD
• Toptech load controller
• E-stops
• LED work lighting
• Onboard generator
• Onboard diesel flush system

The result is a purpose-built mobile asphalt transloading system on a DOT trailer that can be transported to the site and deployed where the operation needs it, rather than requiring the operation to be built around permanent infrastructure.

This is where S&S Technical is different. We don't just supply the pump, loading arm, access equipment, or controls. We engineer the pieces into a proven complete transloading system designed to meet your exact needs.

Need help on your next asphalt transloading system - give us a call at (678) 250-9507

More - https://www.skidsolutions.com/custody-transfer-metering-systems/lpg-ngl-portable-truck-railcar-transloaders/


Valve Systems

10/13/2026

Engineered Systems. One Integrated Team. Built Around Your Application.

We bring engineering, fabrication, and automation together under one roof to deliver custom-engineered industrial solutions.

From initial concept and 3D design to fabrication, controls integration, factory acceptance testing, and commissioning support, our team provides a complete, single-source approach to complex liquid and gas handling applications.

Our capabilities include:

✅ Engineering & Design – Custom mechanical and electrical engineering with advanced 3D modeling.

✅ In-House Fabrication – Skid-mounted systems, structural steel, ASME piping, and equipment integration.

✅ Automation & Controls – PLC programming, HMI interfaces, UL 508A control panels, and integrated process automation.

✅ Custom Skid Systems – Packaged pumping, gas compression, custody transfer metering, chemical handling, and v***r recovery.

✅ Truck & Railcar Loading Systems – Fully integrated loading and unloading solutions designed for safety, accuracy, and operational efficiency.

✅ Factory Acceptance Testing (FAT) – Comprehensive in-house testing before equipment ships to your facility.

https://www.youtube.com/watch?v=SgKdKbdLLfA

📞 Give us a call at 678-250-9507 to discuss your next project and discover how S&S Technical can help bring your ideas to life with our in-house engineering, fabrication, and automation capabilities.

Ready to get started? Request a quote today!

Engineered Systems. One Integrated Team. Built Around Your Applicat...

10/08/2026

The Right Access Solution Starts With Your Operation.

We start by evaluating how your site actually runs. That means your vehicle configurations: tank trucks, railcars or both, the range of deck and hatch heights you load at, and whether the fleet is mixed. It means your hatch positions: where the hatches sit on each vehicle, how many there are and how far apart. It means your frequency of use: how often each position is worked, from a few loads a week to continuous shifts. And it means your loading requirements: the loading arms and connections the operator has to reach, the product being handled and how consistently vehicles spot at the bay.

That evaluation tells us whether a fixed rack, a pedestal, an elevating platform or a portable unit is the right answer, and how the access should fit with the rest of your loading system. Because S&S Technical also designs and builds loading racks, piping and skid-mounted loading systems, we look at the gangway, the platform and the loading equipment together rather than as separate purchases, so the access works the way your operators actually load. As a starting point, permanent racks and platforms suit fixed bays; pedestal and portable units suit single hatches, changing spot positions or sites where a foundation is not practical.

Learn more on our Access & Fall Protection solutions - https://www.skidsolutions.com/access-fall-protection/

Request a quote - https://www.skidsolutions.com/request-quote/

10/06/2026

Mobile Transloading: Flexible Transfer Solutions Where You Need Them

When permanent loading infrastructure isn’t practical, Mobile Transloading Units provide a flexible way to safely and efficiently transfer products between railcars, tanker trucks, storage, and other process systems.

S&S Technical engineers and fabricates mobile transloading systems for a wide range of liquid and gas transfer applications. Depending on the product and operating requirements, systems can integrate:

• Pumps or compressors
• Custody transfer metering
• Filtration and strainers
• Loading and unloading hoses and connections
• Grounding verification
• Overfill protection and emergency shutdowns
• Instrumentation, PLCs, and controls
• Mobile power generation when required

Applications can include gasoline, diesel, ethanol, biofuels, LPG/NGL, chemicals, and other industrial products.

The advantage of a mobile system is flexibility. Equipment can be engineered into a compact skid or trailer-mounted package, allowing operators to establish transfer capabilities where permanent infrastructure may not exist or where operations need to move between locations.

At S&S Technical, engineering, fabrication, automation, integration, and Factory Acceptance Testing are handled in-house - helping deliver a complete system designed around the product, flow requirements, operating environment, and safety requirements.

Need a Mobile Transloading Unit for your next loading or unloading application? Talk to the S&S Technical team about a system engineered for your operation at 678-250-9507 -

Request a quote - https://www.skidsolutions.com/request-quote/

10/02/2026

Precision Cooling for Advanced Semiconductor Manufacturing

Semiconductor manufacturing is highly sensitive to temperature fluctuations. From wafer processing and chemical management to critical tool cooling, maintaining thermal stability is essential for product quality, production yield, and equipment uptime.

S&S Technical designs and fabricates custom heat exchanger skids and process cooling systems engineered around each facility’s specific operational and environmental requirements.

Our systems can incorporate redundancy, intelligent controls, instrumentation, pumps, heat exchangers, and other integrated components to provide continuous, reliable cooling for critical processes.

Whether you need a standalone heat exchanger skid or a fully integrated process cooling solution, we can engineer and fabricate a system built around your application.

Need reliable cooling for a critical process? Let’s talk.

📞 (678) 250-9507

Request a quote - https://www.skidsolutions.com/request-quote/