JayCo Roofing and Restoration

Home
United States
Arlington, TX
JayCo Roofing and Restoration

Directions Website

Commercial and Residential Roofing contractor serving all of the DFW metroplex

10/19/2026

In this video I put tracer smoke on a wind turbine and a static vent (a 750 slant back) sitting on the same roof. The turbine is doing its job and pulling hot air out of the attic. But when I move the smoke over to the static vent, you can see the air getting sucked down into the attic instead of going out.

What's happening is the turbine grabs the easiest air it can find, and that's the static vent right next to it rather than your soffits down at the eaves. So the air just loops across the top of the attic, and the rest of the space stays hot and stagnant. The whole system ends up working against you.

Here's the simple rule I tell homeowners:

- If you've got mostly static vents, stick with static vents.
- If you've got mostly turbines or powered vents, stick with those.
- if you want your system to perform the best, let's get you hooked up with some Roofivent ROTOs.

Your attic should breathe from low to high, with fresh air coming in at the soffits and hot air leaving up near the ridge. There's more to it than just this (balancing intake and exhaust, making sure soffits aren't blocked), but not mixing vent types is a great place to start.

Not sure what's going on up on your roof? Shoot me a message and I'll take a look.

08/30/2026

Taking care of business in Arlington this week! Knocked out a new Malarkey Roofing Products Highlander Class 3 roof in Weathered Wood Plus with an upgraded ventilation system to Roofivent with 5x of the 6” ROTO’s to make sure the attic breathed well. We were cleaned up and gone by 4P.

Need a roof? Shoot us a message

08/13/2026

This client had water getting in their firebox so we custom fabbed a 24 gauge standing seam cap, color matched to their roof accessories.

Is your chimney cap old, leaking or missing? Shoot us a message for an estimate to replace!

07/19/2026

Flat vs. Striated Standing Seam: Which One Should You Choose?

You’ve probably seen both, but do you know why one has ribs and the other doesn’t?

The real issue: oil canning. That wavy, rippled look you sometimes see on flat metal panels isn’t a defect in the metal itself. It’s usually caused by:
• Uneven stress on the panel during fastening/installation
• An imperfect substrate underneath (any high or low spot telegraphs through)
• Thermal expansion and contraction (metal moves with temperature swings, and if it’s not installed to allow for that movement, it shows)

Striations help because the ribs (striations) break up the panel’s flat plane. That disrupts light reflection and visually hides minor waviness so even if there’s some movement or imperfection underneath, your eye doesn’t catch it. It’s a practical fix for a common problem.

If you’ve got a truly flat substrate and an experienced crew that installs with proper clip spacing and fastening technique, flat panels can look incredible. The tradeoff is there’s less room for error. Flat panels show every imperfection; striated panels forgive them.

Bottom line:
• Want a sleek, modern look and have a great installer + flat deck? Flat panel is a great choice.
• Want a lower-risk option that hides substrate imperfections and installation variance? Striated is the safer bet.

It’s not “better vs. worse”, it’s about matching the panel to your substrate and your installer’s skill level.

07/17/2026

Testing is still in progress on the teleporting. But the verdict is out, if you want great apparel - call Big Red Fern

07/17/2026

There’s nothing better than showing people the work that you’ve done. Need a roof? Call Jayco.

04/26/2026

The DFW metroplex got a lot of hail, a lot of wind and a lot of rain last night, with more projected for today, tomorrow and Tuesday.
Main impacted areas were:

- Fort Worth stockyard area - 2.5”
- SW Arlington - 1.5”
- Trenton/Whitewright - 3”
- Springtown/Azle - 2”

If you need your roof looked at, give us a call or shoot us a text at 817-941-2280.

04/09/2026

This is awesome to see!

The average plumber in America earns $61,000 a year.

The top 10% earn over $100,000. They set their own hours, can't be outsourced to another country, and can't be replaced by AI.

Meanwhile the average college graduate carries $37,000 in student loan debt and spends the first decade of their career trying to justify the degree they were told was non-negotiable.

Lowe's sees what's coming and they're putting $250 million behind it.

The skilled trades gap in America is real and it's getting worse. The average age of a plumber in the United States is 55.

Electricians and carpenters aren't far behind. An entire generation of tradespeople is heading toward retirement and there aren't enough young workers entering the field to replace them.

The Bureau of Labor Statistics projects the U.S. will need 85,000 new electricians alone over the next decade just to meet demand. The pipeline to fill that gap doesn't exist yet.

What does a shortage of skilled tradespeople mean in practice?

It means longer waits and higher costs for every home repair, renovation, and new construction project in the country.

It means infrastructure projects running over budget and behind schedule. It means the housing supply problem getting worse before it gets better.

I've got four kids and I'll tell you exactly what I tell them. A skill that can't be automated, can't be offshored, and is in critically short supply is one of the most valuable things you can build.

A wrench in the right hands has always been worth more than a diploma on the wrong wall.

Address

2909 E Arkansas Lane, Suite C #11
Arlington, TX
76010

Website

http://www.jaycoroofing.com/

Alerts

Be the first to know and let us send you an email when JayCo Roofing and Restoration posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.