GEMÜ Valves USA

Call Directions Website

GEMÜ Valves USA Family-owned leader in global of , measurement and GEMÜ employs a worldwide team of 2400, and in North America, 200.

GEMÜ is one of the world's leading manufacturers of valves, measurement and control systems. Since its foundation in the year 1964, this globally focused, independent family-owned enterprise has established itself in important industrial sectors thanks to its innovative products & customized solutions for process media control. GEMÜ is a world market leader for sterile valve applications in the pharmaceutical and biotechnology industries. Thanks to a large network of commercial partners, GEMÜ is active in over 50 countries on all continents.

Cosmetics, pharmaceuticals, cleaning agents, oils, greases and small-dose beverages usually run on linear fillers. Filli...
11/09/2026

Cosmetics, pharmaceuticals, cleaning agents, oils, greases and small-dose beverages usually run on linear fillers. Filling points sit in rows, a batch of containers fills at once, and the whole batch is ejected after each cycle.

That design leads to two requirements:
⚡ Speed: the length of each fill directly sets the system’s throughput.
🎯 Accuracy: in pharma, filling very small volumes precisely is essential, especially for high-value drugs.

Linear fillers also give you design flexibility. You can attach any number of fixed pipes, cables or compressed air lines. Some plants use two complete filling units, so one keeps filling while the other runs CIP/SIP. That avoids downtime for cleaning.

GEMÜ valves for this job:
🔹 GEMÜ 660 and F40: pneumatic diaphragm valves built for many fast filling cycles and long service life
🔹 GEMÜ F60 servoDrive: a motorized diaphragm globe valve for the strictest dosing requirements

Planning a new linear line, or upgrading one for tighter tolerances? Our team can help you choose the right valve.

100+ filling points, a carousel that never stops, and a valve block at every station.Circular fillers are the workhorses...
11/06/2026

100+ filling points, a carousel that never stops, and a valve block at every station.

Circular fillers are the workhorses of bulk food and beverage filling. Filling points sit around a rotating carousel, so each container gets enough time for a controlled fill while the line keeps moving.

What happens at each station:

✅ Still media (water, juice, dairy): a two-stage fill. The container fills slowly at first, then fast, then slows again to hit the target level. This is controlled by a bypass valve upstream plus a filling valve with a servo or two-stage actuator, such as the GEMÜ 658 or F60 servoDrive.

✅ Oxygen-sensitive products: nitrogen pushes out the remaining oxygen before the container is closed.

✅ Carbonated media: auxiliary vacuum, CO₂ and release valves condition the container and pressurize it with CO₂, and the fill is again usually two-stage. The GEMÜ C50/C53 iComLine valves are designed for these auxiliary tasks.

✅ Cleaning: filling lines connect to CIP cups, and cleaning media flushes through and drains back out the same way.

With this many filling points, valve reliability and serviceability make a real difference in uptime.

Long service life and easy maintenance mean shorter stops when you have to replace a diaphragm at 100 stations.

Running a circular filler? Ask us about complete filling blocks from GEMÜ Systems.

Consumers want food without artificial colors, flavors or preservatives. Pharma is filling more vaccines and oncology dr...
11/04/2026

Consumers want food without artificial colors, flavors or preservatives. Pharma is filling more vaccines and oncology drugs, where every milliliter is worth a lot. Both trends lead to the same place: stricter hygiene and more precise filling.

GEMÜ’s filling portfolio is designed for this:

🔹 Aseptic diaphragm globe valves with PD design that combine fast cycling, high flow rates and long service life
🔹 Auxiliary process valves for pre-evacuation, CO₂ pressurization and venting
🔹 Valves for CIP/SIP cleaning, whether built into the filler or installed in the facility
🔹 Complete subassemblies from GEMÜ Systems, including filling lines with flowmeters, two-stage filling and the matching auxiliary valves

Typical media include carbonated and still beverages, dairy, cosmetics, cleaning agents, acids and alkalis, oils and greases, medicinal products, and corrosive or abrasive media.

Products: GEMÜ F40 | F60 servoDrive | 650 BioStar | 658 | 660 | C50 & C53 iComLine

Our sales and service network means you have a local expert for every application, including right here in the U.S.

What’s the hardest medium your line fills? Let’s talk.

Halloween at GEMÜ USA was a spooktacular success! Our team brought their creativity to life with some amazing costumes—c...
11/02/2026

Halloween at GEMÜ USA was a spooktacular success! Our team brought their creativity to life with some amazing costumes—check out our contest participants who truly embraced the Halloween spirit. 👻 We hope everyone had a safe and fun-filled Halloween! 🎃

With its hermetically sealed handwheel and chambered diaphragm, GEMÜ D20 meets the most stringent hygiene requirements –...
10/30/2026

With its hermetically sealed handwheel and chambered diaphragm, GEMÜ D20 meets the most stringent hygiene requirements – ensuring process reliability and low maintenance for 3-A® applications. 🔍

1. Handwheel: For easy replacement of wear parts
2. Secure O-Ring: Hermetic sealing for 3-A® applications
3. Bayonet pin: Time savings and reduced susceptibility to errors
4. Fixed stop: Controlled setting behaviour of the diaphragm, no retightening
5. Star-shaped and captive compressor: For optimum diaphragm support
6. Diaphragm: Secure installation thanks to wide lugs and recesses
7. Fewer loose mounting parts: Easy, user-optimized union using flanged nuts and stud bolts

Application areas: Pharmacy & biotechnology | Food & beverage

👉 gemu-group.com

Hygienic. Easy. Compact. Effective.GEMÜ D20 – Manual 2/2-way diaphragm valve made of stainless steel.Reliable manual val...
10/26/2026

Hygienic. Easy. Compact. Effective.

GEMÜ D20 – Manual 2/2-way diaphragm valve made of stainless steel.
Reliable manual valve with chambered diaphragm and a sealed handwheel for 3-A® applications.

✔ Easy and fast maintenance – Reduces maintenance time, lowers costs, and prevents installation errors
✔ New diaphragm technology – Extends maintenance cycles and improves control accuracy
✔ Optimized body design – Reduces energy demands, protects media, and boosts performance
✔ Highest hygiene standards – Minimizes the risk of contamination and qualifies the valve for the most demanding processes

Application areas: Pharmacy & biotechnology | Food & beverage

👉 gemu-group.com

New in our portfolio: GEMÜ D20 – a manual 2/2-way diaphragm valve in stainless steel.Designed for sterile applications, ...
10/19/2026

New in our portfolio: GEMÜ D20 – a manual 2/2-way diaphragm valve in stainless steel.
Designed for sterile applications, GEMÜ D20 combines a chambered diaphragm with a hermetically sealed handwheel. That makes it especially suited for 3-A® applications.

What that means in your process:
✔ Easy, fast and safe mounting – shorter maintenance times, fewer installation errors
✔ Low-maintenance, fixed chambered diaphragm – longer maintenance cycles, improved control accuracy
✔ Weight- and flow-optimized body with very high Kv values – lower energy demand, protects your media
✔ Handwheel hermetically sealed to 3-A® – minimized contamination risk

Hygienic. Easy. Compact. Effective. – for Biotech & Pharma and Food & Beverage.

We are looking forward to seeing you again today at SEMI Americas SEMICON West 2026!Let's meet and discuss the future of...
10/14/2026

We are looking forward to seeing you again today at SEMI Americas SEMICON West 2026!

Let's meet and discuss the future of high purity solutions. 🚀

A customer came to us with a clear requirement: a multiport block solution rated to 16 bar, beyond what the GEMÜ 650 pla...
10/09/2026

A customer came to us with a clear requirement: a multiport block solution rated to 16 bar, beyond what the GEMÜ 650 platform delivers.

The result: the first multiport blocks in the GEMÜ D40 product line, part of our LEAP platform.

The D40 is our high-performance diaphragm valve for aseptic processes. It brings that platform's strengths to a compact multiport design:

🔹 Up to 16 bar. Flexible actuator selection makes plant design easier and lowers CapEx.
🔹 New diaphragm technology. Diaphragms with a constant characteristic mean longer maintenance cycles and better control accuracy.
🔹 Easy, fast maintenance. Fewer installation steps cut downtime and help prevent assembly errors.
🔹 Optimized body design. The flow- and weight-optimized body has a recessed valve seat and flattened cavity angles, which protects sensitive media and reduces OpEx.
🔹 Automation-ready. It's compatible with the GEMÜ 12A0 intelligent position indicator and the GEMÜ 44A0 multi-functional valve actuation.

It's built for biotech, pharma, food & beverage, and cosmetics applications where hygiene and uptime can't be compromised.

If you're looking for a custom solution in the D40 product line, reach out. Our team is ready to engineer it with you.

GEMÜ. Here for you. Personally.

🔗 leap.gemu-group.com

📸

We're excited to meet you at the ISPE Boston Product Show next Wednesday, October 7!🔴Booth E113 🔴Will we see you there? ...
10/02/2026

We're excited to meet you at the ISPE Boston Product Show next Wednesday, October 7!

🔴Booth E113 🔴

Will we see you there? Let us know 👇

Still need to register? Attendee registration is free!
https://ispe.swoogo.com/2026iibps/11479821

Address

3800 Camp Creek Pkwy SW, Bldg 2600 Suite 120
Atlanta, GA
30331

Alerts

Be the first to know and let us send you an email when GEMÜ Valves USA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share

Nearby engineering companies