G28 Machining LLC 07/02

09/02/2026

I've been off and on about getting this tool Library set up for many years. I've started then stopped many times.

Two Saturdays ago I finally just stopped and started making it like I want it. I bought another rack off the Amazon. I stripped all the tools out of the four Mills and started lining up the course set of tools.

Follow along to see how this progresses.

What has been your experience with setting up to a libraries for the milling machines?

08/27/2026

Quality isn't just what happens at final inspection.

Sometimes things go wrong. What matters is what happens next.

After this machine was damaged, our service technicians found a small deviation in the machine's alignment. Rather than settle for "good enough," we made the decision to replace the X-axis linear rails and completely realign the machine.

Could we have worked around it? Maybe.

That's not how we do things.

If a machine isn't right, we make it right.

It's an investment of time and money most customers will never see, but it's part of making sure the parts leaving G28 Machining meet the standard our customers expect.

The work behind the parts matters just as much as the parts themselves.

07/09/2026

The job isn't finished when it comes off the machine.
A quality finish matters just as much as precision machining.
At G28 Machining, we offer mass finishing services including vibratory tumbling and abrasive blasting to remove burrs, break sharp edges, improve appearance, and prepare parts for coating or assembly.
Whether you need a handful of parts or a production run, we can take your components from machined to finished—all under one roof.
Need a machining partner that can deliver complete parts instead of just cut metal?

📩 Send us your prints or CAD files and let's talk about your next project.

07/08/2026

When you need parts machine give us a call.
I can help change your configurations to make your maintenance on equipment easier.

Check out how we helped this customer.

07/03/2026

When production stops, every minute matters.

This industrial customer was down and needed a replacement part—fast. There wasn't time to wait weeks for an OEM replacement, so we got to work immediately.

The challenge? This wasn't a standard thread. After carefully inspecting the original component, we determined it used a non-standard Acme-style thread that couldn't simply be pulled from a handbook or programmed from a catalog.

Using precision thread wires, careful measurement, and years of machining experience, we reverse-engineered the thread geometry and manufactured a replacement that fit correctly.

To keep the project moving, we overnighted both the raw material and specialty tooling, machined the part as soon as everything arrived, and got it back out the door so our customer could get back to production.

This is the kind of work we enjoy—solving problems that don't have an off-the-shelf solution.

If your operation is waiting on obsolete parts, custom components, or emergency repairs, G28 Machining is ready to help. We specialize in reverse engineering, precision CNC machining, and fast-turnaround manufacturing when downtime isn't an option.

📞 Need a part made fast? Reach out today and let's get your equipment back in service.

06/26/2026

Always have to look at it from the wrong side.
Sometimes that's what it takes when features are on all sides of the parts.

Do you have complex parts that need to be machined?

Email us at [email protected].

06/25/2026

06/25/2026

We are getting after it today.
Six machines each running a different part.

What kind of parts do you need produce? Let us help find your next solution.

Email us at [email protected].

06/24/2026

That is a long tool.

Give a guess on its length. It doesn't matter if it's in millimeters or inches. We can work in both units.

Solving everyday Machining problems give us a call.

06/24/2026

That's a lot of rings.

Need help with overflow work. We got you covered.

Shoot us a message at g28machining.com