T & D Welding Services LLC

T & D Welding Services LLC T & D Welding Services is a family run welding, metal fabrication, and inspection company.

I fix a lot of these chairs for a local restaurant. Every one they buy breaks. The original seat mounting points are rea...
08/27/2026

I fix a lot of these chairs for a local restaurant. Every one they buy breaks. The original seat mounting points are really thin metal and tack welded in place. These upgraded mounting points do the trick. I haven't had one back yet

There really is no excuse for such a high dollar chair to break so readily. I'll keep beefing them up

08/18/2026

I know I'm not alone! A lot of small time shops (like me), farmers, DIYers, and handymen take their cylinders to the welding supply just like the tank on the left. Scootched up against the bed somewhere with something heavy to hold it in place. They always end up rolling around. No matter how well you try to prop them. This solution isn't for everyone and a lot of shops have a nice welding truck to strap them in, but if you don't (and don't like them sliding all over) then this can be a beneficial aid. I have them in single and 2 bottle and as a kit or ready to use.

https://www.tdweldstore.com/products/truck-bed-cylinder-stabilizer-diy-kit?variant=44662335537288

08/14/2026

I've really enjoyed having this small laser. I bought it for material marking/cleaning, gasket making, and engraving. This black oxide nut was really pushing the limits on how small I can make these QR codes. Even at 1/4" square my phone was able to read it quickly. Although I'm not sure there is a use case for laser engraving hardware, I still think its a cool possibility.

Material traceability is no joke in some industries. I've used these QR codes on some very high end jobs as a quick and efficient way to reliably check material conformance.

[email protected]
tdweldstore.com

Years of welding, grinding, hammering have caused some nerve damage for my hands. Gripping a conventional dust pan has b...
08/12/2026

Years of welding, grinding, hammering have caused some nerve damage for my hands. Gripping a conventional dust pan has been hard some days. The narrow handles and weight shifted to the front really strains the wrist. During a particularly bad spell, I developed this. This pan allows your fingers to slide under the pan, which puts the center of mass closer to your wrist, and the thumb can latch over the top edge to keep it from tipping over. They also keep your wrist in a more natural position that can actually support the weight of the stuff in the pan. They are heavy duty enough for my welding shop but weigh just under 1 pound. I don't have them for sale yet, but they are coming! I'm not sure how useful they could be generally, but they work great for me. Let me know if its something I should push more.

08/12/2026

Laser everything!

I bought a laser mostly for part marking and traceability purposes but when I have some down time or when I just want to...
08/11/2026

I bought a laser mostly for part marking and traceability purposes but when I have some down time or when I just want to keep it busy I've been making these custom TIG cups. They seem to hold up just fine even when welding with AC. I don't have these listed on my store just yet, I still have some adjustments to make and I'm exploring the possibilty of filling the etch with an underglaze to really make them pop!

We had to pull the PTO unit on our IH 1086 yesterday. It's kind of a heavy and awkward piece to remove. I took some meas...
08/03/2026

We had to pull the PTO unit on our IH 1086 yesterday. It's kind of a heavy and awkward piece to remove. I took some measurements and made up a lifting bracket to make the job easier. I've got them posted on eBay for sale. It works great and saves the back.

https://ebay.io/m/Zywgr8

I've never bragged on these too pipe coping tools much but I recently had to make a custom set and I thought this would ...
06/15/2026

I've never bragged on these too pipe coping tools much but I recently had to make a custom set and I thought this would be a good opportunity to showcase them. These can be made for any diameter tube to tube size and for any angle.

•3D printed and laser etched for durability/identifiability.
•Index in 22.5° increments, so the copes always line up as intended and they
•Feature a hole in each face so you can put reference marks or mark center lines.
•Work perfectly for laying out the cope lines to follow with a hole saw

I have them for sale on my website, but you can always ask for the files too. I might have to charge a bit for the design work, but I'm all about sharing ideas.

and yes, my "photobooth" is a cardboard box spray painted white on the inside.😄

Address

7990 W 75 N
Bargersville, IN
46106

Telephone

+13176707720

Website

Alerts

Be the first to know and let us send you an email when T & D Welding Services LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category