mk North America, Inc.

Call Directions Website

mk North America, Inc. mk North America has been offering t-slot profile and conveyor solutions since 1988. Please Contact us, providing custom solutions is one of our specialties.

At mk we design, engineer and manufacture structural aluminum framing, conveyor, guarding and linear motion systems. The variety and flexibility of our offering is unsurpassed, and mk products have proven themselves world-wide in a broad variety of applications and industries.

Even with our very broad offering of standard components and systems, we realize that you may not find a product that meets your exact requirements. Our state-of-the-art lean manufacturing facility allows us to build these solutions quickly and cost effectively.

Our Commitment to Top Quality Support:

While one aspect of our company culture is certainly related to continuing to make the best products in the industry even better, we are even more committed to making sure our customers get top notch support before, during and after each and every sale.

Our Advantages:

* Flexibility: We will modify our products or tailor our services to meet your needs.

* Selection: With 30 different conveyor styles, more than 200 extrusion shapes and over 2000 system components, mk offers the most comprehensive "modular building kit" available.

* Quality: 100% inspection and quality control on every product shipped.

* Value: Lean manufacturing principles ensure cost-effective products.

* Reliability: World-class on-time delivery.

* Support: Our customer service group and a great network of distribution partners and field sales representatives stand ready to provide you with the highest level of service and application support.

11/04/2026

Some applications come with requirements that go well beyond moving a part from A to B.

On this VersaFlex P08 system, both the tabletop chain and the wear strips underneath are conductive making it a great solution for work where static is a concern. Along with this the need for line access demands a lift gate conveyor section that opens and closes when required.

Material and design choices like these are what allows a standard conveyor platform to fit a specialized application making the system work for the people as well as parts.

The problem: Large parts that come in different sizes are hard to convey on a fixed-width line. Set it for the biggest p...
11/02/2026

The problem: Large parts that come in different sizes are hard to convey on a fixed-width line. Set it for the biggest part and the small ones don’t sit right. Set it for the smallest and the big ones won’t fit.

The solution: This decline system gives you two timing belt lanes on a common frame. One lane stays fixed, and the other moves in and out on linear rails to match the part, with clamps to lock it in place. A flat belt conveyor runs down the middle and carries smaller parts to the same operator.

The result: Different part sizes run on one line and arrive together at one unload station.

One frame that adapts to the product is better than a new line for every size.

10/29/2026

Every line has its own pressure points.

For some, it’s a transfer that can’t keep up. For others, it’s an environment that wears equipment down. And for some, it’s a pallet that has to be turned at exactly the right angle.

This month’s mash shows three answers, from an overhead belt transfer to the SBF-P 2000 flat top chain conveyor and a manual lift and rotate.

The right component at the right pressure point keeps the whole line moving.

10/27/2026

This VersaMove system combines different conveyor styles, focusing on unique strengths to optimize flow.

Long straight runs use SRF-P 2010 accumulating roller chain, built to queue up multiple pallets per drive and maintain asynchronous motion. At each corner, ZRF-P 2010 timing belt conveyors are mounted to turntables, which handle single pallets with limited accumulation and provide precise movement. Rotation allows the pallet to maintain leading edge as it travels through parallel assembly lines.

Matching the conveyor style to the application makes the system work exactly as intended.

Think of grip top like tire tread for a conveyor belt.A smooth surface lets flat product slide. Textured links give it s...
10/23/2026

Think of grip top like tire tread for a conveyor belt.

A smooth surface lets flat product slide. Textured links give it something to hold. On this KMF-P 2040, every third link has that grip surface, which helps product stay in place as it moves through a 90° curve.

Good traction is what turns a belt into a reliable path.

10/21/2026

The problem: Tall, narrow glass bottles in several sizes need to move from an operator loading station into machinery and back out again. They tip easily, and every handoff between conveyors is a chance for one to fall over.

The solution: The infeed uses double-strand guide rails, one low and one high, so each bottle is supported at two points. The rails adjust across the width to match the bottle size. Stainless steel transfer plates bridge the gaps between conveyors, and a short flat belt conveyor feeds the equipment downstream.

The result: Bottles leave on accumulating takeaway lanes, held against fixed end stops, with a pneumatic pusher choosing which lane each one goes to.

One layout, several bottle sizes, and a controlled path from load to takeaway.

The doors are open at PACK EXPO International, and our team is ready to give you your next solution.Whether you’re looki...
10/19/2026

The doors are open at PACK EXPO International, and our team is ready to give you your next solution.

Whether you’re looking to improve an existing line or planning a new application, our team is on hand to talk through conveyor layouts, material handling, and everything in between.

Talk through systems with Sales Manager Scott Blais Jr. and Regional Sales Managers Damon Neal and Pete Calderon

Find us in the North Hall, Booth N-4635.

📍 Booth N-4635 | McCormick Place
🗓️ October 18-21
📌 Chicago, IL

10/15/2026

Repeatable position is what separates a conveyor that moves totes from one that supports a process.

On this line, a fixed end stop sets the first reference point. A pneumatic crowder in the last zone pushes the tote against it, then another crowder at the start of the outfeed lane does the same after the transfer. Both stops give the next operation a known location to work from.

Consistent tote position means consistent loading, cycle after cycle.

The countdown is on, just 5 days until PACK EXPO International! Every packaging line has unique challenges. That’s why m...
10/14/2026

The countdown is on, just 5 days until PACK EXPO International!

Every packaging line has unique challenges. That’s why mk North America offers a wide range of conveyor platforms and flexible configurations to help bring your next application to life.

Our team is getting ready to connect with industry professionals and talk all things packaging and conveying.

Come meet our Pack Expo team:

Scott Blais Jr. - Sales and Business Development Manager
Michael Zampano - VersaFlex Product Manager
Damon Neal - Regional Sales Manager: AR, KS, LA, MO, OK, TX
Pete Calderon - Regional Sales Manager: IL, IA, WI, NE

Have a project in mind? Looking for a more flexible conveyor layout? We’d love to hear what you’re working on and explore a solution together. Let’s talk material handling, product flow, and solutions designed around your needs.

📌 Booth: N-4635

📍 McCormick Place, Chicago, IL

Most accumulation conveyors store product in a single stream. A bi-flow design splits the job.Here, two belts hold parts...
10/09/2026

Most accumulation conveyors store product in a single stream. A bi-flow design splits the job.

Here, two belts hold parts side by side, and a narrow VersaFlex lane runs between them. Parts accumulate on the outer belts, then get diverted by roller rails onto the center lane, where they exit one at a time.

That gives you the storage capacity of a wide accumulation zone with the clean single-lane egress a downstream process needs.

Address

105 Highland Park Drive
Bloomfield, CT
06002

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

(860) 769-5500

Alerts

Be the first to know and let us send you an email when mk North America, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby engineering companies