Delta T Comfort, LLC

Home
United States
Bremerton, WA
Delta T Comfort, LLC

Call Directions Website Contact the business

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Delta T Comfort, LLC, Heating, ventilating & air conditioning service, 400 Warren Avenue, #450, Bremerton, WA.

09/10/2026

We get asked this a lot: "Is annual maintenance really necessary?" Short answer — yes. Here's why.

If your system is still under manufacturer's warranty, most manufacturers require routine annual maintenance by a licensed pro to keep that warranty valid. No maintenance records, no warranty coverage.

If your system is older and out of warranty, maintenance still pays off — it catches small problems before they turn into expensive (or total system-replacement) emergencies, and it lets us track your system's health over time so you can plan a replacement on your terms instead of scrambling during a no-heat/no-cool crisis.

Case in point: the photos above. We were out on a diagnostic for a new client and found a low-voltage short — caused by the unit's normal vibration wearing a hole through the wiring insulation over time. This is exactly the kind of thing routine maintenance catches before it becomes a problem.

Low-voltage shorts are especially frustrating because they're not always easy to find, and they can cause intermittent failures — the system fails, you call us, and then it mysteriously starts working again before we arrive.

08/07/2026

It's wildfire season — and with the current fires burning and smoke settling across the Pacific Northwest, most of us here in Kitsap County are spending more time indoors than usual. And honestly, that makes sense. But while you're inside avoiding the outdoor air quality, don't forget about what's happening to the air inside your home. 🌫️

Most homes are not tightly sealed. Every time you go in and out — every door opening, every pet coming inside, every gap around windows and doors — particulates are making their way in. Your indoor air quality during a smoke event is more compromised than most people realize.

Here's what to do:

🔲 Stay on top of your filter. This is the single most important thing you can do right now.
🔲 If you have someone in your home who is very sensitive to the smoke, consider stepping up to a higher MERV rating — but do it carefully.

MERV 8 — standard filter, captures larger particles
MERV 11 — a solid middle ground for most homes
MERV 13 — the highest we recommend for residential systems. Captures significantly more fine particles including smoke particulates

⚠️ Do NOT go above MERV 13. Yes, MERV 16 filters exist — but they are far too restrictive for residential HVAC systems, especially older ones. Running a filter that's too restrictive forces your system to work harder, reduces airflow, and can cause real damage over time.

🔲 If you do upgrade your MERV rating — set a monthly reminder to check it.

This is the part most people miss. The higher the MERV rating, the smaller the particles it captures — which means it fills up faster. A MERV 13 filter can clog significantly sooner than your normal replacement schedule. A clogged high-MERV filter causes the exact same problems as a clogged standard filter — reduced airflow, system strain, water leaking, and potential damage.

Upgrade if you need to. Just check it more often.

Sources: U.S. EPA — https://conta.cc/4wNErGe | U.S. DOE — https://conta.cc/4wNErWK | ASHRAE — https://conta.cc/4z9JAKn

05/27/2026

Which split system is right for your home? 🤔
Central ducted, heat pump, or ductless mini-split — the answer depends on your home, your budget, and what you're trying to accomplish. There's no one-size-fits-all here.
As an authorized American Standard dealer and Puget Sound Energy Trade Ally, we'll help you figure out exactly what makes sense — and apply your PSE rebate instantly at the point of sale.
No pressure. Just honest answers.

Graphic: American Standard Heating & Air Conditioning

05/25/2026

Today we pause to honor and remember those who gave everything in service to our country.

Our office is closed, but our phones are on for any urgent HVAC needs.

05/22/2026

If you're thinking about replacing your HVAC system in Bremerton or anywhere in Kitsap County, this graphic from our partners at American Standard Heating & Air Conditioning is a great starting point — but let's add some local context to each of these three considerations.

✅ Choose the right system type — central, packaged, or ductlessThis decision depends heavily on your home's existing infrastructure. Many older homes in Bremerton were built without ductwork — baseboard heat, boilers, or radiant systems. For those homes, a ductless mini-split heat pump is often the most efficient and least disruptive path to year-round comfort. For homes with existing ducts in good condition, a central ducted system may be the right call. There's no universal answer — it depends on your specific home.

✅ Look at efficiency ratings — SEER2 = higher = more efficientThis is true, but here's the honest context for Kitsap County: our cooling season is shorter and milder than most of the country. A system in the 15–18 SEER2 range typically hits the right balance of efficiency and cost for most Bremerton homeowners. Going higher isn't wrong — but the payback period on a very high SEER2 system is longer here than it would be in a warmer climate. For heat pumps, also look at HSPF2 — the heating efficiency rating — since we run heating more months than cooling here.

✅ Home improvements can reduce the size you needThis one is underrated and we love that it's on this list. Better insulation and upgraded windows reduce your home's heating and cooling load — which means you may need a smaller, less expensive system than you would otherwise. If you're already planning envelope improvements, it's worth sequencing them before your HVAC replacement so the load calculation reflects your home's actual future performance.At Delta T Comfort, we walk through all three of these with every Kitsap County homeowner before we recommend anything. No pressure. Just the right information to make a good decision.

Graphic credit: American Standard Heating & Air
Conditioning

05/20/2026

This is exactly what we do before recommending any HVAC system to a Kitsap County homeowner — and why it matters that your contractor does it too.
A proper Manual J calculation isn't just plugging in your square footage. As this graphic from our partners at American Standard Heating & Air Conditioning shows, it looks at four key factors specific to your home:

📐 Square footage
🪟 Insulation quality, windows & sunlight exposure
🏠 Ceiling height & layout
🌧️ Climate & ductwork

That last one is especially important for Bremerton homeowners. Our Pacific Northwest climate — with its persistent humidity, mild winters, and damp air year-round — means your home's heating and cooling load looks very different from a home in eastern Washington or anywhere else in the country. A contractor using a one-size-fits-all approach isn't doing the job correctly.

Washington State Energy Code (WAC 51-11R) requires a proper heat load calculation for new HVAC installations. That means this isn't optional — it's what the law requires. If you've had a system installed and aren't sure a Manual J was performed, ask. A reputable contractor can show you the documentation.

At Delta T Comfort, we run this calculation on every installation. We document it. And we'll walk you through it if you want to understand what drove our recommendation.

Graphic credit: American Standard Heating & Air Conditioning
Source: Washington State Energy Code, WAC 51-11R — app.leg.wa.gov

05/18/2026

This graphic from our partners at American Standard Heating & Air Conditioning says it perfectly — and it's something we talk about with Kitsap County homeowners constantly.

The right AC (HVAC) size = better comfort + efficiency. Too small and your system runs constantly, struggles to keep up, and leaves you with uneven temps. Too large and it short-cycles, fails to control humidity, and wears out faster than it should.

Here in Bremerton and across Kitsap County, humidity control is just as critical as temperature. Our damp Pacific Northwest climate means an oversized system that short-cycles will leave your home feeling clammy even when the thermostat reads right. That's not comfort — that's potentially a system that is the wrong size.

Here's what most homeowners don't know: Washington State Energy Code (WAC 51-11R) requires a proper heat load calculation for new HVAC installations. That calculation — called a Manual J — is what determines the correct system size for your specific home. Not a guess. Not square footage alone. The actual math.

If you've had a system replaced and your comfort isn't what you think it should be and aren't sure a load calculation was done — ask.
Any reputable HVAC contractor in Kitsap County should be able to show you that documentation.

At Delta T Comfort, we run a Manual J on every installation - which is the reason we come to do a sight walk. Because the right size system is the foundation of everything else.

Graphic credit: American Standard Heating & Air Conditioning
Source: Washington State Energy Code, WAC 51-11R — app.leg.wa.gov

05/08/2026

We have a winner!! Congratulations to Pam! Thank you for stopping by our booth at the Peninsula Home and Garden Expo.

Toby will be delivering that to you at your scheduled appointment!

If you missed us this year, make sure to find us next year at the 2027 show! We would love to say hello and answer any questions you may have about HVAC!

05/01/2026

Hey Delta Friends!

We are at the Peninsula Home Expo all weekend! See us in booth 902!Stop by and see us to say hello!

We have Date Night In a Basket Raffle for you to enter when you stop by to see us!!

See you soon!!

04/20/2026

We're exhibiting at the Peninsula Home Expo in Bremerton and we'd love to see you there! 🏠
📅 May 1–3
📍 Bremerton, WA

Stop by the Delta T Comfort booth and talk to us about your home's heating, cooling, or air quality — no pressure, just honest answers.

And here's the fun part: schedule a service or estimate appointment at the expo and you'll be entered to win a gift basket giveaway. Plus, we're offering special expo-only pricing.

Whether you've been thinking about a heat pump upgrade, want to know if your system is ready for summer, or just have questions you've never gotten a straight answer to — come find us.

We'll be there all three days serving Kitsap County homeowners the same way we always do.

PC: KBA

Address

400 Warren Avenue, #450
Bremerton, WA
98337

Telephone

+13608213114

Website

http://www.DeltaTComfort.net/

Alerts

Be the first to know and let us send you an email when Delta T Comfort, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Delta T Comfort, LLC:

Want your business to be the top-listed engineering company in Bremerton?