MasterMover, Inc.

Name: MasterMover, Inc.
Address: 8041-J Arrowridge Boulevard, Charlotte, NC, 28273, US
Telephone: (980) 263-2210

Home
United States
Charlotte, NC
MasterMover, Inc.

Call Directions Website

MasterMover designs & manufactures electric tugs that move wheeled loads up to 790,000 lbs with ease.

11/05/2026

What do dumpsters and satellites have in common?

The safest way for a single operator to move both is with a MasterMover electric tugger.

Our range handles loads from 1,100 lbs all the way up to 660,000 lbs and every machine is built to the same standard of safety and control - whether your team is moving everyday carts and dumpsters or high-value aerospace sub-assemblies through tight production zones.

Every application gets the same engineering attention too. From routine moves your team makes dozens of times a day to the critical ones where there’s zero margin for error.

At Greystar’s Sorella Apartments, the team reduced injury risk on the daily dumpster run with a DumpsterMover300 and a leading satellite manufacturer now uses two tuggers in MultiLink to move payloads weighing almost 110,000 lbs as one.

Whatever the load, the standard stays the same. Just tell us what you’re moving and we’ll handle the how.

11/03/2026

Every second counts on an automotive assembly line. But when positioning heavy transport jigs relies on cranes or manual effort then efficiency takes a back seat.

We've spoken to teams who face this daily:
⚠️ Jig movements interrupt flow and tie up valuable resources
⚠️ Manual handling poses a constant risk to health and safety
⚠️ Precise placement is critical but difficult to achieve without powered control

The result is slower takt times, increased risk of damage, greater strain on operators and, with it, a risk of workers' comp claims.

Electric tuggers offer a smarter way forward.

Multiple operators would normally be needed to manually move a tooling jig. An electric tow tugger allows a single operator to handle the heavy load safely, easily, and precisely - tripling productivity can be that simple 📈

When margins are tight and uptime is everything, rethink how you move materials.

10/27/2026

Watch how two of our PS3000+ electric tuggers work together using our patented MultiLink control technology to transfer a 880,000 lbs. carriage from one track to another.

Traditionally, this would require multiple personnel and diesel-powered equipment, all of which are risky and time-consuming.

Swapping to our heavy-duty PowerSteered electric tuggers reduces staff required to a single operator, freeing your team up to focus on higher-value tasks. It also eliminates diesel fumes in your workshops as well as time wasted waiting for licensed drivers - because electric tuggers don't require a license to operate!

✅ All controlled by a single operator
✅ Balanced traction for smooth, precise movement
✅ Clear line of sight at all times
✅ Maintain safe distance from load
✅ License-free to operate

Want to see what MultiLink-enabled tuggers could do in your facility?

10/20/2026

"What are you actually trying to move?"
That's how we start projects.

By getting to the bottom of your challenges in order to specify a solution that will actually work for you - rather than just selling you an off-the-shelf product.

Our sales and application engineering teams work with you to understand your site, operations, challenges, and goals to ensure you get the results you need.

As our VP of Sales, Jason, puts it: "Great sales teams do more than sell products. They put their customers' objectives first, challenge conventional thinking, and find innovative ways to move what others can't."

By working with MasterMover, you know you're working with real material handling experts.

Click for more info on how we specify electric tuggers https://mm.mastermover.com/4835S3T

10/15/2026

Handling critical defense components and vehicles requires absolute precision.

From fuselage sections and aerostructures to tanks and military helicopters, material handling challenges are often an afterthought.

And that can result in expensive damage to equipment.

With large, awkward loads of high-value, it's mission-critical to ensure that operators can maneuver assets without risk.

That's why our electric tuggers are used by leading defense manufacturers across the globe to move multi-ton equipment with millimeter accuracy.

✅ Prevent damage to high-value components during moves
✅ Reduce the risk of manual handling injuries
✅ Increase throughput by reducing dependence on forklifts or cranes
✅ Hit sustainability targets with zero-emission battery power

It's never been easier to move smarter.

10/13/2026

Your forklift crew is costing more than you think.

Moving heavy enclosures with forklifts is rarely a one-person job and usually requires:
❌ Multiple forklifts to shunt the load
❌ A certified driver for every truck
❌ Dedicated spotters for visibility
❌ Overlapping shifts to keep licensed drivers on hand

In our case example based on a real-world conversion project, that’s a crew of 5 tied up to move a single load between production stages.

By switching to MasterMover PowerSteered tuggers in a MultiLink setup, that drops to a max of two people: one operator, plus an optional spotter.

Based on a $350,000 investment, here’s what that looks like on paper 👇
✅ 60% headcount reduction on the workflow
✅ $312,000 in annual labor savings
✅ 89.1% simple annual ROI
✅ 13.5 months payback from labor savings alone

Already planning to rent or replace forklifts?
Factor in the avoided cost and payback can drop to as little as 6.4 months.

Not to mention the other incurred costs: training and recertification, insurance premiums, scraped racking, damaged equipment, and congested aisles.

OSHA estimates forklifts are involved in around 35,000 serious injuries every year.
Fewer forklifts on the floor means less risk, less rework, and more of your team focused on work that drives throughput.

Want to run the numbers for swapping to electric tuggers on your own site?
See the full case breakdown and our 5-step ROI calculation via the link below ⬇️

10/07/2026

"By the evening, our shoulders and backs were aching."

The production team at Tresse Métallique were moving dozens of heavy carts by hand every day.

Pulling heavy loads results in awkward posture and puts repeated strain on the lower back and shoulders, a major cause of musculoskeletal disorders (MSDs).

For a business where safety is the number one priority, that risk had to go. Their fix was an SM100+ electric tugger.

✅ One tugger now moves fifteen different carts, up to ten times a day
✅ No more manual pushing or pulling for operators
✅ Handling time cut by around 20%
✅ Adopted so quickly a second unit was ordered

Less strain on your people, more time for the work that matters.

10/06/2026

There's no margin for error when moving rocket and satellite components through assembly.

Space programs run on tight schedules and even tighter tolerances. So every sub-assembly movement has to be precise.

Our electric tuggers are trusted by some of the world's leading aerospace manufacturers to move mission-critical components and assemblies.

One leading satellite manufacturer replaced its diesel towing tractors with two PS3000+ tuggers in a MultiLink set-up (meaning they work together in sync to move even heavier loads). Now a single operator has precision control of satellite movement weighing up to 110,000 lbs.

✅ Pinpoint positioning for high-value, sensitive loads
✅ Single operator control with no license required
✅ MultiLink setups for loads up to 660,000 lbs
✅ Emission-free & battery-powered
✅ Loads stay safely on the ground throughout the move

Keep your most critical aerospace assets moving with total control.

09/29/2026

The AI boom won't wait for a forklift.

Data center build-outs are moving fast and nobody wants a chiller, HVAC unit, or CDU sitting idle while the schedule slips.

But moving heavy equipment with forklifts takes a crew - you need a licensed driver for every truck, a dedicated spotter alongside each one, and the rest of your assembly team standing by until the load is in place.

MasterMover remote control tuggers in MultiLink setups give your team omnidirectional control to position loads weighing up to 660,000lbs precisely and safely.

One operator can handle the whole move, with no license required. So as soon as the load is ready, it's on its way - no bottlenecks.

Fewer people tied up, less time waiting, more throughput.

09/22/2026

Manual cart handling was causing back and shoulder pain but they fixed it with an electric tugger.

"Safety comes first, it is our number one priority... using the electric tugger has reduced our handling time by around 20%."

Dozens of heavy carts moved by hand, every day. At Tresse Métallique Forissier (International Wire Group), that meant sore backs and aching shoulders - aka a rising risk of MSDs for the team.

By introducing a SM100+ electric tugger after we walked the floor and saw the challenge first-hand, the results speak for themselves:

⚡ 20% less handling time
⚡ 1 tugger → 15 carts → up to 10 runs a day
⚡ 0 manual pulling

Protecting people as a priority also results in productivity gains. There's no trade-off here; safety and productivity go hand-in-hand.

But don't just take our word for it. Watch the project video below and hear from Tresse Métallique's HSE Director and Production Line Manager 👇

Address

8041-J Arrowridge Boulevard
Charlotte, NC
28273

Telephone

(980) 263-2210

Website

https://www.mastermover.com/en-us/

Alerts

Be the first to know and let us send you an email when MasterMover, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.