Mold Solutions Tampa Bay

06/15/2026

This is what we do best and why our reviews are superb, never cut corners to remove harmful indoor contamination that restore health to the home.

06/05/2026

Customer was coughing and congested and noticed what looked like a mushroom coming out of the baseboard in their shower. Sure enough there was a major hidden water issue behind the shower and had made its way into the adjacent wall and closet.

05/18/2026

Short of replacing all the moldy timber, there is a several layer process that we follow involved sanding, scrubbing, treating and cleaning followed by encapsulation we follow to take care of this common issue with new construction.

05/06/2026

This home was originally hit by the hurricanes 🌀 was “remediated” but due to poor reconstruction ended up back in the hands of needing remediation after a third party assessor confirmed major mold was present. Hidden gaps around windows and ceiling was the major issue in this case. This home will be restored to good health.

04/21/2026

We all learn from our mistakes. Some were more costly than others. Bleach on porous material is one of those big mistakes.

04/07/2026

🏠 Tampa Homeowners: Is your house a mold incubator?

In our Florida heat, “dry” isn’t just a feeling, it’s a science. If you’re dealing with a leak or HVAC issues, you need to know these two numbers:

Relative Humidity (RH): This is the moisture in your AIR. Once it hits 60%, mold spores get the green light to start growing. If your AC shuts off or cools too fast without dehumidifying, you’re in the danger zone.

Moisture Content (MC): This is the water trapped INSIDE your walls and floors. When building materials hit 17% moisture, mold starts getting going. At 20% it starts to thrive.

The Trap: Your living room might feel cool, but if your walls have a high moisture content, mold is growing where you can’t see it.

Why the Pro Matters:

Mold remediation isn’t just a “spray and wipe” job. You need a team that understands the science of moisture and humidity.

We use professional-grade moisture meters and thermal imaging to find the hidden water that eyes can’t see.
Don’t just dry it, verify it’s dry!

If you don’t find the source mold will come back.

IndoorAirQuality TampaBusiness WaterDamage

04/06/2026

Is hidden mold behind a wall something to be concerned about? Lots of factors to consider: 1. Is there a pathway to exposure? 2. What kind of mold and is mold present elevated enough to require attention 3. The clients sensitivity, although repeated and constant exposure could be a health risk even to those who are not sensitive over time. Better safe than sorry.

03/17/2026

🚨 BEFORE YOU BUY A HOME… CHECK THIS FIRST:

I recently completed a mold inspection for a homebuyer who wanted peace of mind before closing.

What we found 👇
❌ Water-damaged materials
❌ High mold levels (Penicillium/Aspergillus + Chaetomium)
❌ Baseboards separating from walls
❌ Warping under windows
❌ Floor buckling

👉 This home looked fine on the surface… but hidden moisture told a completely different story. The good news? We can have this remediated within 2-3 days!

03/13/2026

Rod and Aspen recently completed a detailed environmental assessment at a home in the Tampa Bay Area, where hidden mold was discovered inside the HVAC system using an inspection camera. Many mold problems in Tampa Bay homes develop in areas that are rarely inspected, including inside ductwork, air handling systems, and wall cavities where moisture can remain unnoticed.

Aspen’s trained canine nose also helped identify three additional areas of concern in the home that were not immediately visible during the initial walkthrough. Mold detection dogs can often locate hidden mold behind walls or inside building materials that might otherwise be missed.

At Mold Solutions, the first step is always gaining a broad understanding of the home and identifying potential sources of moisture, contamination, and indoor air quality concerns. This allows us to help homeowners understand what may be happening inside their environment and what steps may be needed to resolve the issue.

When testing or sampling is necessary, we work alongside experienced mold inspectors serving Clearwater and the Tampa Bay area who specialize in environmental testing and lab analysis. Our goal is to help homeowners move toward cleaner, healthier indoor air by identifying problems early and guiding the next steps toward proper resolution.

Our health centric approach is what makes us different. We’re not just doing mold remediation. We are doing small particle cleaning and detoxing the home.

03/02/2026