All Southern Fabricators

Directions Website

All Southern Fabricators All Southern Fabricators has 40+ years of experience crafting custom stainless steel equipment for top food service brands.

Counters, cabinets, refrigeration & more are made with precision and care. Single-source solutions, personalized service.

Organization Elevated. ✅The difference between a functional storage area and a money pit? Custom shelving that actually ...
10/23/2026

Organization Elevated. ✅

The difference between a functional storage area and a money pit? Custom shelving that actually works for your operation.

Professional-grade stainless steel and wire shelving systems designed for commercial kitchens:
✔️ Custom sizing for your walk-in, dry storage, or prep area
✔️ Adjustable shelves that adapt as your inventory changes
✔️ Built to hold heavy commercial loads without sagging
✔️ Rust-proof, food-safe materials that last 20+ years

No more digging through clutter during service. No more expired product hiding in the back. No more over-ordering because you can't see what you have.

📞 Need custom shelving for your kitchen? Call us today.

The "cheap" walk-in cooler that costs $800/month to run isn't cheap. 🧊Refrigeration is one of the biggest operating expe...
10/20/2026

The "cheap" walk-in cooler that costs $800/month to run isn't cheap. 🧊

Refrigeration is one of the biggest operating expenses in any commercial kitchen; energy costs, repairs, and eventual replacement add up fast.

Here's what separates a smart refrigeration investment from an expensive mistake:

✔️ Insulation thickness: cheap units use 2" foam; quality units use 4"+ (cuts energy costs in half)
✔️ Compressor grade: residential-grade fails in 3-5 years under commercial load; industrial-grade runs 15-20 years
✔️ Seal quality: poor door seals leak cold air constantly (your compressor never rests)

The unit with the lowest purchase price almost always has the highest lifetime cost.

Your kitchen's hardest-working surface. Built to survive decades, not quarters. 💪Custom stainless steel worktables fabri...
10/14/2026

Your kitchen's hardest-working surface. Built to survive decades, not quarters. 💪

Custom stainless steel worktables fabricated right here in Florida for restaurants, chains, and food service operations that refuse to replace equipment every few years.

Heavy-gauge stainless. Food-safe welds. Reinforced where it matters. We've been doing this for 50+ years; we know exactly where commercial kitchens break cheap tables, and we build around it.

Still using a table we built in 2005? We hear that a lot.

📞 Ready for equipment that keeps up with your operation? Call us for a custom quote.

Happy Columbus Day!Our shop is open today and ready to help with your custom stainless steel fabrication needs.📞 Need a ...
10/12/2026

Happy Columbus Day!

Our shop is open today and ready to help with your custom stainless steel fabrication needs.

📞 Need a quote or have questions about a project? Give us a call; we're here.

Custom steel doesn't happen by accident. It follows a process.Design review: we read your prints and flag issues before ...
10/08/2026

Custom steel doesn't happen by accident. It follows a process.

Design review: we read your prints and flag issues before we cut.
Precision cutting: CNC plasma or brake work, depending on tolerance.
Welding and assembly: clean beads, square corners, structural integrity.
Finishing: deburr, grind, prep for paint or powder coat.

If you need custom steel fabricated the right way, let's talk about your project.

Built for Professional Kitchens, from the line to the pass. 👨🍳Left side: Friday night rush. Multiple stations firing. He...
10/05/2026

Built for Professional Kitchens, from the line to the pass. 👨🍳

Left side: Friday night rush. Multiple stations firing. Heavy pans slamming down. Ingredients flying. Your stainless steel worktables taking a beating every single shift.

Right side: Precision plating. Clean lines. Every ingredient in reach. The same stainless steel equipment, spotless and performing exactly as designed.

Here's the test: Can your kitchen equipment handle both?

We fabricate custom stainless steel worktables, prep stations, and shelving systems for Florida restaurants that need gear built for real professional kitchens, not just the Instagram-ready moments, but the chaos that happens before the plate goes out.

Heavy-gauge 304 stainless steel. Full TIG welds on every seam. Food-safe surfaces that clean fast and stay pristine. Custom sizing and equipment integration designed around your actual workflow.

📞 Need custom stainless fabrication for your professional kitchen? Call us; let's talk specs, layout, and what your operation really demands.

Opening This Fall? Let's make sure your bar is ready before your guests are. 🍻You've locked your location. Signed the le...
10/02/2026

Opening This Fall? Let's make sure your bar is ready before your guests are. 🍻

You've locked your location. Signed the lease. Hired your head bartender. Finalized the drink menu.

Now it's time to build the bar system that'll actually execute it, night after night, year after year.

Custom stainless steel workstations designed around your specific layout and service flow. Multi-tap b**r systems. Built-in ice bins and glass rinsers. Seamless integration with wood cabinetry and custom finishes. Every weld, every edge, every piece of equipment placement engineered for durability and speed of service.

We fabricate premium bar setups for Florida restaurants, breweries, taprooms, and hotel bars. And here's the reality: custom fabrication, delivery, and installation take time. Waiting until the last minute means compromising on quality or pushing your opening date.

The best time to start your bar build? Right now.

📞 Opening this fall? Call us today for a custom bar fabrication quote; we'll walk through your specs, timeline, and what your space really needs.

The strength of a weld isn't just about the metal; it's about prep.Most failures happen because the base metal wasn't cl...
09/29/2026

The strength of a weld isn't just about the metal; it's about prep.

Most failures happen because the base metal wasn't cleaned or beveled correctly. Rust, mill scale, or contamination creates weak points that crack under pressure. A proper prep takes longer, but it's what separates a weld that holds from one that fails.

Clean metal. Proper fit. Consistent heat. The fundamentals still win.

Custom steel fabrication for structural beams, railings, brackets, frames, and stairs.We work from your prints, cut to t...
09/24/2026

Custom steel fabrication for structural beams, railings, brackets, frames, and stairs.

We work from your prints, cut to tight tolerances, weld for structural integrity, and check every piece before it ships. Send us your specs or drawings, and we'll walk you through the process.

If you need custom steel built right, let's talk.

Myth: All welders can fabricate custom steel.Fact: Welding is one skill; fabrication requires layout, cutting, fitting, ...
09/21/2026

Myth: All welders can fabricate custom steel.
Fact: Welding is one skill; fabrication requires layout, cutting, fitting, and finishing.

A strong weld on poorly fit metal still fails. Fabrication is the whole job, start to finish.

Address

5010 126th Avenue N
Clearwater, FL
33760

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Website

Alerts

Be the first to know and let us send you an email when All Southern Fabricators posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category