Texas Ico Inc

Texas Ico Inc Trusted Supplier for the Cleveland, TX & surrounding areas, for steel, welding, pipe, fittings, valves & gases.

Family-owned, customer-focused, and here to keep your projects moving.

TIG welding is known for producing some of the cleanest, strongest, and most precise welds in the industry. Whether you'...
06/22/2026

TIG welding is known for producing some of the cleanest, strongest, and most precise welds in the industry. Whether you're working with stainless steel, aluminum, or exotic alloys, TIG gives you maximum control over heat input and weld appearance.

✔ Clean material before welding
✔ Use the correct tungsten for the application
✔ Maintain proper gas coverage
✔ Keep a steady travel speed

When quality matters, TIG welding is often the process of choice.

Your torch tip is doing the heavy lifting every time you cut steel. Using the wrong size, a worn tip, or a dirty tip can...
06/19/2026

Your torch tip is doing the heavy lifting every time you cut steel. Using the wrong size, a worn tip, or a dirty tip can lead to rough cuts, excess slag, slower cutting speeds, and wasted gas.

✅ Match your tip size to the material thickness
✅ Keep tip orifices clean with proper tip cleaners
✅ Replace damaged or worn tips before performance suffers
✅ Check your oxygen and fuel pressures regularly

A few minutes of maintenance can save time, gas, and frustration on the job.

What thickness material are you cutting most often? Let us know in the comments! 👇

A cutting torch is only as good as the tip on the end of it 🔥The right torch tip affects everything from cut quality and...
06/17/2026

A cutting torch is only as good as the tip on the end of it 🔥

The right torch tip affects everything from cut quality and preheat time to gas efficiency and overall safety. Too small, too large, or the wrong fuel-specific tip can turn a clean cut into a rough, slag-covered mess fast.

In this week’s blog we break down:
✔ Acetylene vs propane tips
✔ Tip sizing by steel thickness
✔ One-piece vs two-piece tips
✔ Common cutting problems
✔ Proper cleaning & maintenance

Whether you’re cutting light sheet metal or heavy plate, understanding your torch tip setup can improve performance, save gas, and make every cut cleaner.

Read the full blog here:
https://texasico.com/the-supply-line-1

06/15/2026

🚨 GIVEAWAY TIME 🚨

When we hit 1,500 followers, ONE lucky winner is getting 4 tickets to see Braxton Keith live on 9/26/26! 🎶🔥

To enter:
✅ LIKE this post
✅ FOLLOW our page
✅ SHARE this post
✅ TAG 3 friends you’d bring to the concert

Every tag is your future concert crew in the making 🍻🎸

Winner announced once we hit 1,500 followers! Let’s run these numbers up! 👊

🔥 A clean cut starts before the torch ever lights.Dirty tips, wrong pressures, and rushed setup can wreck cut quality fa...
06/15/2026

🔥 A clean cut starts before the torch ever lights.

Dirty tips, wrong pressures, and rushed setup can wreck cut quality fast. A few extra minutes checking your equipment saves grinding time later.

Clean tip. Correct pressure. Steady travel speed.
That’s the recipe. 🛠️

🔧 Quick Tip FridayNever force a regulator connection.If it doesn’t fit naturally, double-check the gas type and fitting....
06/12/2026

🔧 Quick Tip Friday

Never force a regulator connection.
If it doesn’t fit naturally, double-check the gas type and fitting.

Wrong connections and damaged threads are a fast track to leaks, downtime, and unsafe conditions. Slow is smooth. Smooth is safe.

06/10/2026

🎯 Regulators & gauges do more than just sit on the cylinder. They help control pressure, protect equipment, and keep your gas flowing the way it should.

A bouncing needle, inconsistent flow, or sudden pressure drop could be warning signs you don’t want to ignore. Learning how to read your gauges can save time, improve weld quality, and prevent costly downtime. 🔥🔧

Check out this week’s blog and learn what your gauges are really telling you:
https://texasico.com/the-supply-line-1

🎯 Your gauges tell a story.Pressure dropping too fast?Needle bouncing?Flow inconsistent?Those little dials can warn you ...
06/08/2026

🎯 Your gauges tell a story.

Pressure dropping too fast?
Needle bouncing?
Flow inconsistent?

Those little dials can warn you about leaks, empty cylinders, or equipment problems before they become expensive headaches. Learn to read them before they read your wallet. 💸🔥

⛽ Weekend Shop Question:What cylinder size do you run most often?🔹 Small portable cylinders🔹 80 CF🔹 125–150 CF🔹 Large sh...
06/05/2026

⛽ Weekend Shop Question:
What cylinder size do you run most often?

🔹 Small portable cylinders
🔹 80 CF
🔹 125–150 CF
🔹 Large shop cylinders

Drop your go-to setup below 👇

Welcome to Texas ICO, your trusted source for industrial, welding, specialty, and medical gases across Southeast Texas.F...
06/04/2026

Welcome to Texas ICO, your trusted source for industrial, welding, specialty, and medical gases across Southeast Texas.

For decades, we've helped businesses, contractors, manufacturers, welders, and individuals get the products and service they need to keep working safely and efficiently.

From industrial gases and welding supplies to cylinder rentals, bulk gas solutions, and expert support, our team is committed to providing dependable service and competitive pricing every step of the way.

Whether you're running a fabrication shop, managing a construction project, or tackling a weekend welding job, Texas ICO is here to help.

🔥 Industrial & Specialty Gases
⚙️ Welding Supplies & Equipment
🚚 Reliable Service & Delivery

Thank you for supporting a locally owned Texas business. We look forward to serving you.

Address

Cleveland, TX
77327

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 12pm

Telephone

+12815928444

Website

Alerts

Be the first to know and let us send you an email when Texas Ico Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category