Cogliano Customs

Cogliano Customs Specializing in building one off custom cars, race cars, and metal fabrication.

YELLOWBULLET 2026 this weekend! Cecil County Dragway Sept 4-6, come out and say hi!
09/01/2026

YELLOWBULLET 2026 this weekend! Cecil County Dragway Sept 4-6, come out and say hi!

We are final sanding Dan’s Camaro which means paint is right around the corner. At this point in the project it is alway...
08/26/2026

We are final sanding Dan’s Camaro which means paint is right around the corner. At this point in the project it is always exciting and nerve racking. The attention to detail cannot be lost in the excitement of getting color on it!

Brian’s 1970 Boss 302 is in to get the total package for hard core road racing. Starting out back we turned to a Street ...
08/21/2026

Brian’s 1970 Boss 302 is in to get the total package for hard core road racing. Starting out back we turned to a Street or Track Watts link set up. Some minor welding on the drivers side axle tube for a bar attachment and trimming under the car, the kit went together well! Rob installed leaf spring sliders and new shocks from QA1 to take the stock style rear suspension as far as we can go! We stripped the rear apart and installed new gaskets and axle seals and a fresh coat of semi gloss black. Onto the transmission we installed a hydraulic clutch set up from American power train which included the pedal and slave cylinder. The tuning ability of fuel injection is unmatched installing a Holley Sniper 2 seals the deal for performance and reliability which Brian wanted. Electric fans, power steering, and a race column all being installed to limit driver and engine fatigue. Cobra Automotive sent us parts to finish out a full race prep on the steering components getting rid of the rubber bushed parts to needle bearings throughout. We meticulously removed the original wiring and are preparing to finish the install on the new American Auto wire harness. This is a remarkable car that Brian has here. Glad that we have a small part in it!

This ‘68 Oldsmobile convertibles getting really good parts from QA1, Texas Speed & Performance, and Tremec Performance! ...
08/09/2026

This ‘68 Oldsmobile convertibles getting really good parts from QA1, Texas Speed & Performance, and Tremec Performance! Mike our customer wants to hit the key in this muscle car and drive it anywhere rain or shine. Stay with us as we get deeper into re-assembly on this one!

One of our objectives and requests was to keep Tony’s hood from becoming a Blackstone Griddle. We drew out various shape...
07/17/2026

One of our objectives and requests was to keep Tony’s hood from becoming a Blackstone Griddle. We drew out various shapes, tried different locations from the normal go to, the top of the hood to the side of the hood we could not settle with any of them. A combined effort between Tony and our team we designed and made these wheel tub vents. With the location being close to the radiator, shedding heat can escape. We used our Lennox, to create a recessed blank in 20g sheet metal that would end up being trimmed down and shaped to fit the wheel tub, then in turn welding those blanks in and metal working the weld seams back out. Since the trim piece was aluminum it was in our best interest when it came time to emboss the mesh to make a second set from 1/8” steel on the plasma table. They were turned into a sandwich die and then a 3/8” round die also made to stretch the mesh out flush for a much more tailored look. The mesh was all fitted and trimmed, and the fasteners hidden from the back side. The radiator cover even got its final detail around the latch!

Working on John’s cars are always a treat. Nick bead rolled up some panels to dress up the package tray then added some ...
07/07/2026

Working on John’s cars are always a treat. Nick bead rolled up some panels to dress up the package tray then added some crater maker rings around the button head fasteners to keep the panel rigid when the screws get tightened. A little cage work was done to get the seat to lean back further by bending up some tube with a slight bend on each end. We made an aluminum head rest with some chamfered holes to give it a 60’s speed part feel! This Cyclone is ready to make some runs now!

250 years of this great country! Happy Fourth of July everyone!
07/03/2026

250 years of this great country! Happy Fourth of July everyone!

Joe’s Malibu in for the remainder of his cage work to complete his SFI 25.5 certification on the car. If all goes to pla...
06/19/2026

Joe’s Malibu in for the remainder of his cage work to complete his SFI 25.5 certification on the car. If all goes to plan and “Lil Gangsta’s” 5.30 index is contested at Cecil County Drag ways huge YellowBullet race you may just see this hot rod there!

Bumper and fender modifications on Tony’s C10! Re-profiling the bumper to better fit the front end by slicing and shrink...
06/12/2026

Bumper and fender modifications on Tony’s C10! Re-profiling the bumper to better fit the front end by slicing and shrinking the ends Nick also cut dead center and added more radius to it as well. The fenders were reshaped to have a better silhouette and transition into the bumper!

We are fortunate for our talented team, fitting this 7.50 cert into a stock interior and to keep functionality and form ...
05/13/2026

We are fortunate for our talented team, fitting this 7.50 cert into a stock interior and to keep functionality and form a priority is always easier said than done!

Address

Coatesville, PA
19320

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+16106205474

Website

Alerts

Be the first to know and let us send you an email when Cogliano Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Cogliano Customs:

Shortcuts

Share

Category