https://www.facebook.com/645993211939798/

ODIS Support online GRP and GEKO

Home
United States
Colorado Springs, CO
ODIS Support online GRP and GEKO

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from ODIS Support online GRP and GEKO, Engineering service, 1500 N Grant Street Sten Denver, Colorado Springs, CO.

VAG Full Combo: VW, Audi, Skoda, SEAT, Bentley
✨ Diagnostic, Coding & Programming
✨ Works with latest models – up to 2025
✨ Full pack includes:
✔️ ODIS-S & ODIS-E
✔️ ETKA 8.3 (Parts Lookup)
✔️ ElsaWin 6.0 (Wiring & Repair Manuals)
✔️ Online Access: GEKO,

07/21/2026

OIL SERVICE RESET PROCEDURE ON SKODA FABIA USING VCDS

Follow the correct sequence to ensure the system registers the new maintenance interval.

Procedure
- Step 1: Connect the VCDS cable to the vehicle and computer, open the software, and go to SRI Reset.
- Step 2: Select Reset FIX and ESI – North America Only, then click Perform SRI.
- Step 3: Select Yes to apply the system's default values.
- Step 4: Wait for the SRI Reset Complete message, disconnect, restart the vehicle, and check the results.

If this procedure is helpful, save it for future reference!

07/20/2026

DIAGNOSTIC AND TESTING PROCEDURE FOR P0016 FAULT CODE ON AUDI

Follow the procedure to accurately determine the cause before making repairs.

Procedure
- Step 1: Connect the diagnostic tool, read, and confirm the P0016 fault code along with any related DTCs.
- Step 2: Inspect the Camshaft Position (CMP) and Crankshaft Position (CKP) sensors along with their wiring harnesses.
- Step 3: Check the timing chain/belt and timing marks to identify any timing misalignment.
- Step 4: Inspect the VVT (Variable Valve Timing) system, engine oil level, and oil control valve.
- Step 5: Check the wiring, update the ECU software if necessary, then clear the fault codes and test drive the vehicle.

In your opinion, what is the most common cause when troubleshooting the Audi P0016 fault code?

07/18/2026

HOW TO ACTIVATE THE VENTILATED SEATS FEATURE TO ELEVATE YOUR MERCEDES-BENZ EXPERIENCE

A proper configuration can unlock the comfort features already built into your vehicle.

- Step 1: Connect the vehicle to the diagnostic tool and open DTS Monaco.
- Step 2: Select the EIS222 ECU.
- Step 3: Access Domain [003] EVC CeBeBit 33_64 Schreiben.
Step 4: Find parameter 401 CLIMATISED SEATS FRONT and change the value to Yes (Ja).
- Step 5: Click "Do Coding" to save the configuration.
- Step 6: Perform a Hard Reset for the system to update and activate the feature.

If you want to discover more hidden features on your Mercedes-Benz, please leave your request in the comments section!

07/17/2026

MAKE YOUR MERCEDES-BENZ COOL DEEPER WITH JUST ONE HIDDEN SETTING IN DTS MONACO

A slight air conditioning tweak can make it feel significantly cooler without requiring any hardware upgrades.

Step 1: Connect the vehicle to DTS Monaco using a compatible VCI.
Step 2: Access the HVAC_212 ECU and wait for the system to recognize it.
Step 3: Open Variant Coding to modify the air conditioning system parameters.
Step 4: Locate the TEMPOFFSET parameter, set it to a negative value (e.g., -2 or -3), and click Codieren to save.
Step 5: Turn off the ignition, restart the vehicle, and check the cooling efficiency of the A/C system.

Note: Adjustments should only be made within a reasonable range to ensure the stable operation of the air conditioning system and prevent any potential errors.

Want to discover more hidden Mercedes-Benz settings to enhance your driving experience? Let us know in the comments!

07/16/2026

AUDI Q7 DOESN'T HAVE DYNAMIC TURN SIGNALS YET? UNLOCK THIS HIDDEN FEATURE WITH JUST A FEW CODING STEPS

With the proper coding, you can unlock the OEM-standard dynamic turn signal effect.

📌 The Procedure:
✅ Step 1: Connect your OBDeleven to the OBD-II port and turn on the ignition (ACC mode).
✅ Step 2: Open the OBDeleven app and connect it to the vehicle.
✅ Step 3: Access the Apps section on the main interface.
✅ Step 4: Select Retrofits and locate Dynamic Turn Signal.
✅ Step 5: Change the value to ON.
✅ Step 6: Press Activate and wait for the system to process.
✅ Step 7: When the "Done" message appears, physically test the dynamic turn signals on your vehicle.

⚠️ Note: This feature is only available for Audi Q7 models equipped with LED taillights that support dynamic turn signals. During the coding process, ensure a stable battery voltage to prevent any system interruptions.

👇 What other hidden Audi features do you know that can be unlocked via coding?

07/15/2026

FOR A STABLE DPF OFF ON VOLKSWAGEN, DO NOT SKIP THIS PROCEDURE

Skipping a preparation step can cause the DPF Off process to fail, even if the ECU file has been modified correctly.

If you want the vehicle to operate stably after ECU intervention, follow this exact sequence:
Step 1: Choose the appropriate hardware solution (keeping the original DPF housing or installing a downpipe).
Step 2: Perform a Forced Regeneration to clear the regeneration state and stabilize the system.
Step 3: Open the ECU file using WinOLS and correctly identify the area containing the DPF Switch.
Step 4: Change the value from 00001 → 00000, while also checking the Post Injection and processing DTC Off if necessary.
Step 5: Write the ECU file back, clear any fault codes, and fully test the vehicle's operation upon completion.

Which step do you usually find most challenging when performing a DPF Off on an EDC17? Share your experiences below!

07/14/2026

WHAT IS FAULT CODE 4699 ON AN AUDI WARNING ABOUT INSIDE THE CENTRAL CONVENIENCE MODULE?

Beyond just reading the DTC, technicians must follow the correct diagnostic procedure to pinpoint the root cause.

Follow the proper procedure to avoid unnecessary module replacement:
Step 1: Perform a full DTC scan and save the current fault data.
Step 2: Inspect the wiring, connectors, and power supply of the Central Convenience Module.
Step 3: Check the sensors, door locks, power windows, and related signals.
Step 4: Verify the software version and update if necessary.
Step 5: Back up the coding data before recoding or reprogramming the module.
Step 6: Test all functions and confirm the fault has been resolved upon completion.

How have you handled fault code 4699 in the past? Share your experience below!

07/13/2026

AUDI THROWING A P0236 CODE? DON'T LET ONE FAULT TRICK YOU INTO REPLACING THE TURBO!

Many workshops replace the sensor or even the turbo, but the fault returns because a crucial diagnostic step was missed.

Diagnostic Procedure:
✅Step 1: Scan for faults using VCDS or ODIS, confirm the P0236 code, and save the Freeze Frame Data.
✅Step 2: Check the MAP sensor, connectors, and voltage signal.
✅Step 3: Inspect for boost leaks in the charge pipes, intercooler, and hose connections.
✅Step 4: Check the wastegate, N75 valve, and turbo boost control system.
✅Step 5: Check the ECU signal wires, clear the code, test drive, and rescan to confirm the issue is completely resolved.

In your opinion, what is the most easily overlooked cause of a P0236 code by technicians?

07/11/2026

REPLACING THE MED40 ECU ISN'T ENOUGH: SCN CODING IS THE REAL KEY

Follow the proper procedure to ensure the vehicle receives the correct configuration:

Step 1: Connect MB STAR (C4/C5/C6), launch Xentry, and identify the vehicle.
Step 2: Select Control Unit Update → Update of SCN Coding under the MED40 module.
Step 3: Proceed with the software update and SCN Coding, ensuring a stable internet connection throughout the process.
Step 4: Restart the vehicle, scan for faults, clear DTCs if necessary, and perform a test drive to confirm the ECU is operating normally.

Do you have any tips to speed up the SCN Coding process? Share them below!

07/10/2026

WHERE TO START WHEN DELETING ADBLUE ON A VW PASSAT B7/B8?

Here is a reference guide to help you handle the process correctly, from diagnosis to completion.

📋 Reference Procedure:
Step 1: Diagnose & Record Fault Codes.
Step 2: Read ECU File.
Step 3: File Modification.
Step 4: Write Modified File.
Step 5: Hardware Adjustments (depending on the ECU type, disconnect the NOx sensor or the AdBlue ECU & pump).
Step 6: Clear Fault Codes.

⚠️ Note: AdBlue Off is primarily handled via the ECU software. The AdBlue module usually does not require reprogramming; simply disconnect it properly based on the specific ECU type when necessary.

💬 Want to see more real-life VAG jobs? Follow us now so you don't miss out!

Address

1500 N Grant Street Sten Denver
Colorado Springs, CO
80203

Website

facebook.com

Alerts

Be the first to know and let us send you an email when ODIS Support online GRP and GEKO posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed Engineering Company in Colorado Springs?