Synergy Solutions

Synergy Solutions Synergy Solutions is a full service staffing and recruiting firm in the Metro Detroit area. We specialize in IT, Engineering and Manufacturing placements.

08/23/2022

Job Responsibilities

Performs a variety of assembly operations and processes to make completed driveshafts using hand tools, jigs, fixtures, light power tools and equipment.

Compares system components to customer orders and bills of material to assure completeness of system or components.
Exercises responsibility for quantity and quality of product.
Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating equipment.
Visually inspects parts to standards, repairs units and products that fail to meet requirements or returns flawed products for rework.
As necessary, resolves mechanical or hydraulic problems encountered during assembly.
Performs routine maintenance on equipment as necessary.
Performs all position responsibilities in a safe manner and in accordance with all prescribed time schedules.
Supports total quality management objectives in a team environment.
Performs other duties as required.
Qualifications & Skills

High school diploma or GED.
Six months of manufacturing experience preferred.
Familiarity with quality assurance and light computer skills desired.
Able to lift up to 50 lbs. repetitively and stand for approximately 90% of time.
Able to read a tape measure and micrometer.
Able to read and understand process work instructions.
Ability and willingness to make suggestions to supervisor as to changes or improvements to be made in product or work area.
Above average attendance record.
Must be able to work overtime, off-shifts, weekends, holidays and shutdowns when necessary.
Good attitude with co-workers and toward job responsibilities.
Synergy Solutions is an equal opportunity employer. In keeping with the values of Synergy, we make all employment decisions without regard to race, religion, color, s*x, age, national origin, ancestry, s*xual orientation, physical handicap, mental disability, medical condition, disability, gender or identity or expression, pregnancy or pregnancy-related condition, marital status, height and/or weight. The list of duties and responsibilities outlined above is representative and may not be a complete and detailed list of tasks. Employee must perform any and all other duties assigned by his or her supervisor. Additionally, this job description does not constitute a contract of employment and that the company may exercise its employment-at-will rights at any time.

09/17/2021

Take a look at our top jobs for the week! WE ARE HIRING!

Labor Day is a day of appreciation to acknowledge the hard work of everyone! Synergy Solutions says thank you to all Sy...
09/06/2021

Labor Day is a day of appreciation to acknowledge the hard work of everyone! Synergy Solutions says thank you to all Synergy Employees and Contractors for your efforts each day. Enjoy your day today, you’ve all earned it!

08/04/2021

-Operate specialty machinery to fabricate, manufacture, assemble automotive products
-Maintain and monitor various machines to make sure they function properly
-Understanding of how operated machine works while conducting quality checks periodically
-Verify adequate materials and supplies are available to complete operations as needed and analyze machine operations and output if applicable
-Adjust machine as needed for changeovers, different functions, or other varying needs of production
-Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment
-Perform necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipment
-Operate/monitor multiple pieces of equipment during operation to ensure quality production and minimal unplanned stops
-Communicate with team members and support teams to ensure continuous production of the correct product at high quality levels with minimal wasted time and materials

Required Knowledge, Skills and
Abilities:
-Demonstrates ability to interpret equipment gauges and monitors on factory equipment.
-Possesses knowledge of the structure and function of production environment.
Is able to identify problems or malfunctions with machinery and equipment.
-Demonstrates analytical thinking and problem-solving skills necessary to troubleshoot production issues.
-Pays close attention to detail.
-Exhibits ability to work cautiously but efficiently in potentially hazardous conditions.
-Is familiar with all factory safety procedures and guidelines.
-Demonstrates ability to use power tools safely and effectively.
-Works efficiently and manages time effectively.
-Possesses physical strength and stamina required to stand, walk, and lift for long periods of time.
-Possesses physical dexterity necessary to assemble small and delicate product parts.

Education and Experience:
-Previous experience in factory or warehouse setting is recommended.

Work Environment:
-Working hours will be spent in the factory or warehouse.
-Moderate to heavy physical activity such as walking, and lifting is required on a daily basis.
Individuals may be required to handle or transport hazardous chemicals or fragile products.
-Safety gear, such as goggles, gloves, and helmets should be worn on a regular basis.

Synergy Solutions is an equal opportunity employer. In keeping with the values of Synergy, we make all employment decisions without regard to race, religion, color, s*x, age, national origin, ancestry, s*xual orientation, physical handicap, mental disability, medical condition, disability, gender or identity or expression, pregnancy or pregnancy-related condition, marital status, height and/or weight. The list of duties and responsibilities outlined above is representative and may not be a complete and detailed list of tasks. Employee must perform any and all other duties assigned by his or her supervisor. Additionally, this job description does not constitute a contract of employment and that the company may exercise its employment-at-will rights at any time.

[no caption needed]
07/04/2021

[no caption needed]

06/10/2021

**$350 bonus payable after working 30 days. Additional $350 to be payable after working 60 days**

Job Duties:
-Operate specialty machinery to fabricate, manufacture, assemble automotive products
-Maintain and monitor various machines to make sure they function properly
-Understanding of how operated machine works while conducting quality checks periodically
-Verify adequate materials and supplies are available to complete operations as needed and analyze machine operations and output if applicable
-Adjust machine as needed for changeovers, different functions, or other varying needs of production
-Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment
-Perform necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipment
-Operate/monitor multiple pieces of equipment during operation to ensure quality production and minimal unplanned stops
-Communicate with team members and support teams to ensure continuous production of the correct product at high quality levels with minimal wasted time and materials

Required Knowledge, Skills and
Abilities:
-Demonstrates ability to interpret equipment gauges and monitors on factory equipment.
-Possesses knowledge of the structure and function of production environment.
Is able to identify problems or malfunctions with machinery and equipment.
-Demonstrates analytical thinking and problem-solving skills necessary to troubleshoot production issues.
-Pays close attention to detail.
-Exhibits ability to work cautiously but efficiently in potentially hazardous conditions.
-Is familiar with all factory safety procedures and guidelines.
-Demonstrates ability to use power tools safely and effectively.
-Works efficiently and manages time effectively.
-Possesses physical strength and stamina required to stand, walk, and lift for long periods of time.
-Possesses physical dexterity necessary to assemble small and delicate product parts.

Education and Experience:
-Previous experience in factory or warehouse setting is recommended.

Work Environment:
-Working hours will be spent in the factory or warehouse.
-Moderate to heavy physical activity such as walking, and lifting is required on a daily basis.
Individuals may be required to handle or transport hazardous chemicals or fragile products.
-Safety gear, such as goggles, gloves, and helmets should be worn on a regular basis.

Synergy Solutions is an equal opportunity employer. In keeping with the values of Synergy, we make all employment decisions without regard to race, religion, color, s*x, age, national origin, ancestry, s*xual orientation, physical handicap, mental disability, medical condition, disability, gender or identity or expression, pregnancy or pregnancy-related condition, marital status, height and/or weight. The list of duties and responsibilities outlined above is representative and may not be a complete and detailed list of tasks. Employee must perform any and all other duties assigned by his or her supervisor. Additionally, this job description does not constitute a contract of employment and that the company may exercise its employment-at-will rights at any time.

06/10/2021

Job Duties and Responsibilities:

Operate specialty machinery to fabricate, manufacture, assemble automotive products
Maintain and monitor various machines to make sure they function properly
Understanding of how operated machine works while conducting quality checks periodically
Verify adequate materials and supplies are available to complete operations as needed and analyze machine operations and output if applicable
Adjust machine as needed for changeovers, different functions, or other varying needs of production
Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment
Perform necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipment
Operate/monitor multiple pieces of equipment during operation to ensure quality production and minimal unplanned stops
Communicate with team members and support teams to ensure continuous production of the correct product at high quality levels with minimal wasted time and materials
Required Knowledge, Skills and Abilities:

Demonstrates ability to interpret equipment gauges and monitors on factory equipment.
Possesses knowledge of the structure and function of production environment.
Is able to identify problems or malfunctions with machinery and equipment.
Demonstrates analytical thinking and problem-solving skills necessary to troubleshoot production issues.
Pays close attention to detail.
Exhibits ability to work cautiously but efficiently in potentially hazardous conditions.
Is familiar with all factory safety procedures and guidelines.
Demonstrates ability to use power tools safely and effectively.
Works efficiently and manages time effectively.
Possesses physical strength and stamina required to stand, walk, and lift for long periods of time.
Possesses physical dexterity necessary to assemble small and delicate product parts.
Education and Experience:

Previous experience in factory or warehouse setting is recommended.
Work Environment:

Working hours will be spent in the factory or warehouse.
Moderate to heavy physical activity such as walking, and lifting is required on a daily basis.
Individuals may be required to handle or transport hazardous chemicals or fragile products.
Safety gear, such as goggles, gloves, and helmets should be worn on a regular basis.
Synergy Solutions is an equal opportunity employer. In keeping with the values of Synergy, we make all employment decisions without regard to race, religion, color, s*x, age, national origin, ancestry, s*xual orientation, physical handicap, mental disability, medical condition, disability, gender or identity or expression, pregnancy or pregnancy-related condition, marital status, height and/or weight. The list of duties and responsibilities outlined above is representative and may not be a complete and detailed list of tasks. Employee must perform any and all other duties assigned by his or her supervisor. Additionally, this job description does not constitute a contract of employment and that the company may exercise its employment-at-will rights at any time.

06/10/2021

A Machinist/Operator operates computer numerical control machines to fabricate parts. The CNC operator loads parts in the machine, cycles machine, and detects malfunctions in machine operations, such as worn or damaged cutting tools. CNC operators maintain a safe, organized, and clean work environment.

Job Duties and Responsibilities
· Performs all assigned machine shop operations.
· Detects and reports defective materials or questionable conditions to management or designee.
· Maintains the work area and equipment in a clean, orderly condition and follows prescribed safety procedures.
· Regularly performs milling, turning, drilling, and tapping tasks.
· Performs inspection of machined products, and documents results.
· Completes and maintains paperwork for parts.

Competencies
· Communication proficiency
· Mathematical skills
· Mechanical capacity
· Technical capacity
· Time management

Position Type/Expected Hours of Work

This is a non-exempt, full-time position (40 hours per week) with three different shift types:

· 1st shift: 7am-3:30pm
· 2nd shift: 3:15pm-11:45pm
· 3rd shift: 11:30pm-7:45pm

Eligibility Qualifications
· High school diploma or graduation from a certified technical school preferred
· Understanding of production procedures
· Physical stamina and strength
· May be required to lift parts weighing up to 50 pounds

Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Synergy Solutions is an equal opportunity employer. In keeping with the values of Synergy, we make all employment decisions without regard to race, religion, color, s*x, age, national origin, ancestry, s*xual orientation, physical handicap, mental disability, medical condition, disability, gender or identity or expression, pregnancy or pregnancy-related condition, marital status, height and/or weight. The list of duties and responsibilities outlined above is representative and may not be a complete and detailed list of tasks. Employees must perform any and all other duties assigned by his or her supervisor. Additionally, this job description does not constitute a contract of employment and that the company may exercise its employment-at-will rights at any time.

Synergy has openings in Manufacturing, Light Industrial, Information Technology, and Engineering. Stop looking for your...
06/10/2021

Synergy has openings in Manufacturing, Light Industrial, Information Technology, and Engineering. Stop looking for your next job and let us find you a CAREER! Click the link below!

https://synergysolutions.careers/job-seekers/

Address

1442 Brush Street, Suite 2
Detroit, MI
48226

Telephone

+13133153018

Website

Alerts

Be the first to know and let us send you an email when Synergy Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share