O'Dwyer Design Build

01/29/2026

Making progress on the new carpet install.

01/27/2026

Final coat on the foyer ceiling.

04/12/2024

02/10/2023

Maple Floating shelves, all of the shelves were grain matched for continuous grain flow. Little bit of water and a screwdriver help ease the edge and tighten the miter.

01/16/2023

Relocated 2 shades, the roller shade interfered with a shadow line that was in the trim detail. Cut the bracket, filed and used a black sharpie to clean it up. We used grip and guard plastic to cover the black aluminum framed windows. Some fast-set spackle and paint made quick work of the repair. There was a bald Eagle perched up in the tree making sure we did a good job!

01/12/2023

Custom panels with milled white oak frame. Finished with Rubio charcoal oil plus2c. Lower bed frame has a slot for the under bed light to shine through .workroom

01/11/2023

So versatile! Using the saw to square up some door panels.

01/09/2023

16’ maple countertop in the works.

01/06/2023

Cabinet and drawer assembly getting ready for 1st coat of primer

01/05/2023

Panels glued up and ready for flattening.

01/03/2023

Barn wood - barn door panels. A lot of work goes into just a simple project. Rip,joint,rip to size,joint, glue-up… step 1…

07/11/2022

Walnut slab floating countertop. Reinforced the underside with some 3/8 steel plates. Drilled and countersunk holes to make the screws I had work. Dry fit countertop… on the 30th try it finally fit. It’s tough when both walls are not square and the backside measurement is longer than the front.