07/12/2026
Little different than usual job, but nevertheless it’s suspension. Truck has a 6 inch lift, but customer wanted to go back down to a level. We had to make a bracket and weld it in, in order for the factory crossmember to go in. On most 6 inch kits or bigger you have to cut and make modifications, and they say you can’t go back down afterwards. You can go back down, but you gotta know what you’re doing and have the skill set to re-fabricate what was cut off. This right here shows what we here at Twisted Axles are capable of doing, because most shops would probably turn this job down. Big thank you to Cayden Runions for trusting me and giving me the opportunity once again, on his vehicle, do the best work.
