Prime Heat, Inc

Prime Heat, Inc The Leader in Halogen Curing System For over 20 years, Prime Heat has engineered and installed our systems worldwide for any finish coat application.

This includes adhesives, powders, UV coatings and paints for customers in fields ranging from aerospace to woodworking. Our HalCon Tunnels use short and medium wave Halogen heat coupled with Convection heat. A PLC display with a touch screen interface controls all HalCon Tunnel functions. We use multiple heat zones with our IR sensors and laser pointers to give you fast and precise curing. This re

presents documented time and energy savings over any gas convection system. We can also assist you in Finish Line Support by monitoring and programming your system from our factory. Prime Heat with its HalCon technology can cure most water-based UV coatings in 5 to 6 minutes. This reduces the finish room size and gives you a green coating that is far superior to any other. The PowerCart can be programmed to talk to our HalCon tunnels and robots as well as stop at any location on the line for a specified time. We can cure any three dimensional UV coated products, such as: chairs, desks, furniture and kitchen cabinets. The process is fast and makes finishing easy. This will dramatically change the finish room and gives you a major production, technological and efficiency advantage in a very competitive world market.

Prime Heat Batch Tunnel for RSI
02/14/2015

Prime Heat Batch Tunnel for RSI

Medium vs Short Wave Cure
02/14/2015

Medium vs Short Wave Cure

https://www.youtube.com/watch?v=40R7FzzX5Vk
07/28/2014

https://www.youtube.com/watch?v=40R7FzzX5Vk

Prime Heat Systems new autonomous Power Cart material handling system. Carts are self charging, self directing, and capable of carrying up to 600lbs. Carts i...

This is a very versatile system in that you can program it to run any coating. On the 5” touch screen you can have 10 cu...
02/07/2013

This is a very versatile system in that you can program it to run any coating. On the 5” touch screen you can have 10 cure menu’s and all you do is press the one you want. Based on the cure program, the tunnel will start with warm air, then medium wave heat to a preset set point and then 2 levels of short wave heat to preset temperatures. This allows you to gently ramp up a solvent coating and give it the required time for flash and cure. On most water based coatings you go directly to short wave heat. Once the program has timed out, open the doors and pull your completely cured product out. The halogen heat is controlled by an IR sensor with a laser pointer and the air temperature is controlled separately by a thermocouple. The size, length and system design is based on your part size and the coating material you are using.

Our powder coat tunnels
01/23/2013

Our powder coat tunnels

01/22/2013

Address

1844 Friendship Drive
El Cajon, CA
92020

Website

Alerts

Be the first to know and let us send you an email when Prime Heat, Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category