Monarch-McLaren Ltd.

Call Website Contact the business

Monarch-McLaren Ltd. Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Monarch-McLaren Ltd., 999 Koopman Lane, Elkhorn, WI.

Our products include cup packings, U-packings, vee packings, flange packings, flat leather belting, back-up washers and more—engineered for demanding applications in water-well systems, industrial hydraulics, vintage machinery restoration, and specialty. Monarch-McLaren specializing in Leather Gaskets, cups piston flange packing, hydrolic seals, leather mechanical, leather
packing, leather seals, leather washers, pneumatic packing, u cups, vee packing, water well cups, leather flat belting, and packing ma

The original part number is missing. Can you still replace the seal? Often, there are other ways to begin identifying a ...
11/02/2026

The original part number is missing. Can you still replace the seal? Often, there are other ways to begin identifying a replacement component. When maintaining older industrial equipment, you may have to work with incomplete records, discontinued part numbers, or machinery that predates modern documentation practices.

Start by gathering what is available:
• The original seal or packing, if you have it
• Measurements of the component and its housing
• Equipment manufacturer and model
• Drawings, manuals, or maintenance records
• Photographs of the part and its installed position
• Known operating conditions

These details can help establish the component's design and application requirements. A missing part number doesn't automatically mean a replacement is impossible. Depending on the application, custom manufacturing may be an option when a standard replacement cannot be found. The first step is to identify what the component does and what the equipment requires.

Need a replacement seal for older equipment? Start by gathering these three things. You don't always need a complete ori...
10/30/2026

Need a replacement seal for older equipment? Start by gathering these three things. You don't always need a complete original specification to begin investigating a replacement—but the right information can make the process much easier.

1. The original component – If available, keep the worn seal or packing. Even a damaged sample may provide useful dimensional and design information.
2. Measurements or drawings – Record relevant dimensions and collect any original drawings, part numbers, or equipment manuals you can find.
3. Application details – Document what the component seals, how the equipment moves, and any known pressure, temperature, or operating conditions.

Don't overlook photographs of the installed component and its surrounding equipment, either. For legacy machinery, these details can help determine whether a standard replacement is suitable or whether custom manufacturing should be considered.

In November, we'll take a closer look at how to specify replacement seals when original parts or documentation are difficult to find.

What do you do when the replacement seal you need is no longer available? For equipment that has been operating for deca...
10/28/2026

What do you do when the replacement seal you need is no longer available? For equipment that has been operating for decades, finding a replacement component can be more difficult than performing the repair itself. The original manufacturer may no longer exist. Part numbers may be obsolete. Drawings may be missing. And a standard replacement may not match the original design. Custom manufacturing can offer another path.

Depending on the application and the information available, a replacement component may be developed using an original sample, measurements, historical drawings, or other technical details. The goal is to reproduce a component that meets the equipment's requirements—not simply manufacture something that looks similar.

At Monarch-McLaren, custom leather seals and packings help support equipment and applications where standard replacement options may fall short. When the original part is hard to find, the right information can be the starting point for a solution.

Why can the same seal perform well in one machine but fail prematurely in another? Because a sealing component doesn't o...
10/26/2026

Why can the same seal perform well in one machine but fail prematurely in another? Because a sealing component doesn't operate in isolation. Even when two seals look identical, the conditions around them may be very different. Differences in pressure, temperature, movement, fluid compatibility, surface finish, alignment, and clearances can all influence performance.

This is why a successful seal selection for one machine shouldn't automatically be copied to another without evaluating the application. Leather packing, for example, offers useful characteristics such as flexibility, abrasion resistance, and low friction in suitable applications. But the correct leather type, profile, and treatment still depend on the equipment and its operating requirements. Good seal selection matches the component to the conditions—not just to another part that looks similar.

A new seal doesn't automatically mean a lasting repair. When equipment begins leaking, replacing the seal is often the m...
10/23/2026

A new seal doesn't automatically mean a lasting repair. When equipment begins leaking, replacing the seal is often the most obvious next step. But if the underlying cause isn't addressed, the same problem may return. Before installing a replacement, consider three questions:

1. Is the replacement appropriate for the application?
The material, profile, and dimensions must match the equipment's requirements.

2. Is the surrounding equipment in suitable condition?
Worn surfaces, damaged grooves, misalignment, or excessive clearances can affect sealing performance.

3. Have the operating conditions changed?
Pressure, temperature, movement, or the material being sealed may differ from the original design conditions.

These checks can help maintenance teams make a more informed repair decision. At Monarch-McLaren, we believe effective sealing starts with understanding the application—not simply replacing a component and hoping for a different result.

What can a worn seal tell you about your equipment? A failed sealing component can reveal more than the fact that a part...
10/22/2026

What can a worn seal tell you about your equipment? A failed sealing component can reveal more than the fact that a part has reached the end of its service life. Its wear pattern may provide clues about what's happening inside the machine.

Depending on the application, unusual wear can point to:
• Abrasion from contaminants or rough surfaces
• Uneven loading or misalignment
• Excessive friction or heat
• Incorrect clearances
• Operating conditions that differ from the original design

These clues aren't definitive diagnoses on their own, but they can help guide a closer inspection.

Before installing a replacement, examine the failed component and the surrounding equipment. Understanding the evidence can help you determine whether the seal itself was the problem—or whether something else contributed to its failure. A replacement addresses the worn part. A proper investigation addresses why it wore out.

What is leather packing used for?Leather packing is used as a sealing material in a variety of mechanical and industrial...
10/19/2026

What is leather packing used for?

Leather packing is used as a sealing material in a variety of mechanical and industrial applications where flexibility, abrasion resistance, low friction, and durability are important. Depending on the design and application, leather packing can be found in:
• Hydraulic equipment
• Pneumatic systems
• Water-well pumps
• Industrial pumps
• Air compressors
• Legacy and vintage machinery
• Specialty and restoration applications

One of the advantages of leather is its ability to conform to mating surfaces while maintaining a combination of toughness and flexibility. But leather isn't automatically the right answer for every application. The best sealing material depends on the equipment, operating conditions, and performance requirements. That's why understanding the application comes first.

What does “custom manufacturing” actually mean when it comes to industrial seals and packings?It doesn't necessarily mea...
10/16/2026

What does “custom manufacturing” actually mean when it comes to industrial seals and packings?

It doesn't necessarily mean creating an entirely new product. A custom component might involve:
• Reproducing an obsolete part
• Manufacturing a non-standard size
• Matching an existing component or sample
• Producing a specific profile
• Selecting a particular leather or treatment
• Meeting a military or industry specification
• Adapting a component to unique equipment requirements

For maintenance teams, OEMs, and engineers, that flexibility can be especially valuable when a standard replacement simply isn't available—or isn't the right fit. Custom manufacturing is ultimately about solving the requirements of the application.

A seal can have the right dimensions and still be the wrong seal. When selecting a sealing component, dimensions are onl...
10/14/2026

A seal can have the right dimensions and still be the wrong seal. When selecting a sealing component, dimensions are only one part of the equation.

Engineers and maintenance professionals also need to consider:
• Pressure
• Temperature
• Type and speed of movement
• Sealing medium
• Surface conditions
• Clearances
• Environmental conditions
• Expected service life

Two machines can use seals that look nearly identical but require different materials or designs because their operating conditions are different. That's why effective seal selection starts with understanding how the component will actually be used—not simply finding something that fits. At Monarch-McLaren, application knowledge is an important part of manufacturing the right sealing solution.

Why is my seal leaking even though I just replaced it? It's a common maintenance question—and replacing the seal again i...
10/12/2026

Why is my seal leaking even though I just replaced it? It's a common maintenance question—and replacing the seal again isn't always the answer.

A leaking seal can be caused by:
1. The wrong seal design — The profile may not be appropriate for the equipment or movement.
2. Incorrect dimensions — Even small dimensional differences can affect sealing performance.
3. Installation issues — Damage during installation or improper positioning can lead to premature leakage.
4. Equipment condition — Worn shafts, cylinders, bores, or other mating surfaces can compromise a new seal.
5. Operating conditions — Pressure, temperature, speed, media, or clearances may exceed what the seal was designed to handle.

Before replacing a leaking seal, ask a more important question: What caused the original seal to fail? Understanding the cause can help prevent the same problem from happening again.

Address

999 Koopman Lane
Elkhorn, WI
53121

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

1-262-723-5115

Alerts

Be the first to know and let us send you an email when Monarch-McLaren Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Monarch-McLaren Ltd.:

Shortcuts

Share

Nearby engineering companies