Kiehl3D

Directions Contact the business

Kiehl3D 3D Printer Services

Been awhile since I posted. Not gonna lie, things have been kinda hard here at Kiehl3D lately. But going through my stor...
05/08/2024

Been awhile since I posted. Not gonna lie, things have been kinda hard here at Kiehl3D lately. But going through my storage, I found the namesake of Devastator, my first printer. Yes. I have the original G1 Devastator, missing a couple of small parts and with a broken gun. But I have him.

Presenting....Devastator on Devastator!

Finally got around to assembling the helmet and putting the fangs on the skull mask, now just have to paint the split On...
07/10/2023

Finally got around to assembling the helmet and putting the fangs on the skull mask, now just have to paint the split Oni mask and affix them to the mask and Yoshimitsu from Soul Calibur V's mask is done! Next will be Ichigo's Vasto Lorde mask from Bleach, once I get the right filament. Would prefer to use Amolen Teal Glow in the Dark PLA for it but it hasn't been in stock on Amazon for a minute.

Well, after putting it all together, realized that one of my wheels on the V-Slot was worn to the point of instability. ...
06/17/2023

Well, after putting it all together, realized that one of my wheels on the V-Slot was worn to the point of instability. After about 3 1/2 years, was time to change them out! Since I had it disassembled, I decided to install the X and Y tensioners I had printed out a while ago, and upgrade the belts. About all that's left of what I have currently planned, upgrade wise, is installing a bed cable chain that I have already printed out. Just already spent the day on this and would like to get a print started, considering I thought I would be able to earlier this week.

Had to print out a different Direct Drive bracket than the one I originally had printed out, but the Hero Me Gen 7 upgra...
06/14/2023

Had to print out a different Direct Drive bracket than the one I originally had printed out, but the Hero Me Gen 7 upgrade for Devastator is complete! Printed in Sainsmart Carbon Fiber Filled Nylon 25/75. All that's left is to either install a new 5015 on the left side or solder the red wire back to the terminal, as it broke while I was doing the upgrade, and to tie the cables to the cable management tower.

I finished printing it out last week, here are all the pieces. Now for painting the Oni mask and then assembly!
06/10/2023

I finished printing it out last week, here are all the pieces. Now for painting the Oni mask and then assembly!

Devastators shroud assembled! Minus the fans, hotend, and direct drive, but the parts I can assemble away from the print...
05/31/2023

Devastators shroud assembled! Minus the fans, hotend, and direct drive, but the parts I can assemble away from the printer are done! Prob going to turn in for the night and finish this tomorrow after work.

Finally busted out the heat press insert machine and put all the inserts into Devastators upgraded Hero Me Gen 7 Modular...
05/31/2023

Finally busted out the heat press insert machine and put all the inserts into Devastators upgraded Hero Me Gen 7 Modular hotend fan shroud system. Figured since I had it disassembled to unjam it, I might as well finish the upgrade I needed to do.

Got the glow in the dark masks and statuette out in the sun to get their glow on!
05/27/2023

Got the glow in the dark masks and statuette out in the sun to get their glow on!

My next big mask after the Yoshimitsu mask is going to be on an equal level of awesomeness! I found a model for Ichigos ...
05/26/2023

My next big mask after the Yoshimitsu mask is going to be on an equal level of awesomeness! I found a model for Ichigos Vasto Lorde Hollow Mask from the manga and anime Bleach! I have been looking for this one for a hot minute! Can't wait!

My good friend Matt asked me to find him an Optimus Prime mask to print for him, and this was what I was able to find. P...
05/26/2023

My good friend Matt asked me to find him an Optimus Prime mask to print for him, and this was what I was able to find. Printed in Overture Digital Blue PETG.

Address

Everett, WA

Website

Alerts

Be the first to know and let us send you an email when Kiehl3D posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Kiehl3D:

Shortcuts

Share

Category