Bridge Fasteners

03/16/2020

Right now this is the only EPA registered product to kill Human Coronavirus! In stock now, 10oz of Shockwave, makes 5 gallons of disinfectant. Put .5oz in a 32oz spray bottle and start killing Coronavirus now! Available at bridgefasteners.com

03/10/2020

One of amazons most trusted fasteners brands!! Amazon Choices🤘 @ Bridge Fasteners

03/10/2020

What disinfectant kills Coronavirus? The answer is Fiberlock Shockwave is 99.99 percent effective at killing the Human Coronavirus. Registered by the EPA. Goto Bridgefasteners.com to purchase now! Fiberlock Shockwave 8310.

01/28/2020

Pallets of N95 Masks in stock!
https://www.bridgefasteners.com/products/3m-particulate-respirator-8210-n95 Call Us now to inquiry, 516 249 0959 Ready to ship, or purchase straight from our website!

IN STOCK 1.28.2020 1 Pallet of N95's 8210 320 boxes/ 20 masks box 6,400 masks in total FREE SHIPPING, will ship ASAP NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles Two-strap design with welded dual point attachment helps provide a secure seal Cus...

10/28/2019

Drilltite Heavy Duty Self Drilling Screws with Bonded Sealing Washers. Economical fasteners for applications requiring a weather-tight seal
This economical line of drill screws provides a weather-tight seal for protection against the elements.

FREE Shipping on all orders of $99 and over!

visit: www.BridgeFasteners.com

10/07/2019

Buy direct and save money!
FREE Shipping on all orders $99 and over!

www.BridgeFasteners.com

09/16/2019

Drilltite Heavy Duty Self Drilling Screws with Bonded Sealing Washers. Economical fasteners for applications requiring a weather-tight seal
This economical line of drill screws provides a weather-tight seal for protection against the elements.

http://bit.ly/2mbKqGe

09/09/2019

#12-24 x 2" drill screw with 5/16" hex washer head. Drilltite dual-processed drill points offer equal sharpness and positive drilling. #5 point drills metal up to 1/2" (.500") thick, eliminating separate drilling and tapping operations. Stalgard coating provides 1,000 hrs. salt spray resistance (per ASTM B117). Specially-designed drill points handle the toughest applications
This line of heavy-duty drill screws is designed to speed installation in steel applications up to 1/2" thick.

FREE SHIPPING on all orders of $99 and over.

more at: http://bit.ly/2k7QGhE

08/30/2019

H1-CH Industrial Safety Helmet - ANSI Z89.1 - Headlamp, Visor & Earmuffs Attachment Points - Chinstrap with chin-cup for extra security - Suspension System for extra top impact protection - Hi-Viz Design with front & back visibility - Comfort + Sweatband developed specifically for construction applications - Lateral chin strap adjustment - Sliding breathable vent system on top of the helmet provides ultimate adaptability - Universal size - FREE Shipping on all order $99 and over!

08/30/2019

Defender Safety's H1-CH Industrial Safety Helmet
Avaiable at Bridge Fasteners

more info: http://bit.ly/2PoVnlY

08/27/2019

The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening. http://bit.ly/2LefM7U

The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 3/16"-24 UNC-threaded metal bolt with a minimum length equal to the thickness of the...

08/19/2019

The LDT anchor is a high performance anchor that cuts its own threads into concrete. Available in 3/8” and 1/2" with and without EnvireX coating, 3/4 and 5/8" sizes are available with Sawtooth threads.

Anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors shall have a finished hex washer head with anti-rotation serrations to prevent anchor back-out. The head of the anchor is stamped with a length identification code for easy inspection. The anchor shall be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994.? - Available in 3/8" and 1/2" with and without EnvireX coating.
-Available in 5/8" and 3/4" Sawtooth
-Sawtooth™ design offers improved performance in large diameter holes.
-Superior performance to wedge anchor.
-Installs in less than half the time of wedge anchors or adhesive anchors.
-Simply drill a pilot hole and drive the LDT anchor by hand or impact.
-No torching or grinding required to remove anchor.
-Reduce chances for anchor failure due to incorrect bit usage.
FREE Shipping on all order $99 and over!