Headed Reinforcement Corporation - HRC

Headed Reinforcement Corporation - HRC HRC delivers a wide range of products for construction and retrofit of bridges, parking structures, houses and other concrete structures.

USA
Headed Reinforcement Corp. was established in 1990 in response to the special demands for high quality reinforcement in the seismic region of California. Being the focus branch of the HRC group, Headed Reinforcement Corp. undertakes most of the testing and certification of new HRC products. Headed Reinforcement Corp delivers a wide range of products for construction and retrofit of bridges, pa

rking structures, houses and other concrete structures to the entire American market. CALTRANS Department of Transportation, State of California has pre-qualified a wide range of HRC’s products for use in seismic regions. These products being mainly T-Headed bars and rebar splices/couplers. Canada
The company Headed Reinforcement Canada was established in 1992 to set-up a production unit in Newfoundland, Canada. This production unit produced more than 2,2 million T-Headed Bars for the Hibernia platform and a smaller amount of T-headed bars for the Prince Edward Island Bridge. HRC group has produced over 15 million reinforcement products to a wide range of projects globally. Norway
Metalock Industrier AS was established in 1979 and began in 1985 production of T-Headed bars and mechanical rebar splices/coupler systems to offshore installations in the North Sea. Metalock Industrier is divided into several departments, of which HRC Europe markets the construction products. The company delivers a wide range of specially developed bolts and other products for the Norwegian Railroads and Road works. In addition the company serves the domestic and European construction industry. Metalock Industrier AS has produced T-Headed Bars and reinforcement couplers to several offshore installations as for example Oseberg, Gullfaks C, Troll, Heidrun, Sleipner A&B, Draugen, Ekofisk and more. HRC Europe also undertakes production set-up in other parts of the world i.e. the Middle East and Russia where the company has supplied mobile production units. General Information HRC Group Machinery
The HRC group is the largest owner of specialized friction welding machinery for production of reinforcement products in the world. This machinery is stored at different sites in several countries and can be set-up at customer’s production site upon request. Mobile production units
HRC’s unique production method is the friction welding method. This method is a known method in everything from the car to space industry. HRC’s production machinery has been developed, designed and built by HRC especially for production of reinforcement products. The HRC production method secures full traceability of the products, and comes with an electronic monitor of surveying and storing each weld. This is an automatic quality assurance process that is part of a computer based ISO 9002 quality system of the production. This system has been developed to fulfill the strictest quality assurance requirements for offshore projects. The machinery comes with a technology package for training of local staff.

1 down, 66,000 more to go. By replacing the bottom hook on a shear tie with a HRC 555 T-head the installation time can b...
05/23/2024

1 down, 66,000 more to go. By replacing the bottom hook on a shear tie with a HRC 555 T-head the installation time can be over 60% faster.

Throwback to this amazing project that used HRC T-heads and Couplers. The San Francisco Bay Bridge. Amazing work by that...
03/22/2024

Throwback to this amazing project that used HRC T-heads and Couplers. The San Francisco Bay Bridge. Amazing work by that team to build and lift this into place.

HRC 555 Headed bars replacing hooks on top of columns. Thanks to all our customers for sending us project photos. Keep t...
02/22/2024

HRC 555 Headed bars replacing hooks on top of columns. Thanks to all our customers for sending us project photos. Keep them coming!

Building cages with HRC 500 Series Couplers on a recent AZDOT project.
07/24/2023

Building cages with HRC 500 Series Couplers on a recent AZDOT project.

HRC 670 Field Installed T-heads used on auger cast piles. All HRC products are made in the USA.
04/10/2023

HRC 670 Field Installed T-heads used on auger cast piles. All HRC products are made in the USA.

HRC 555 T-heads helping with installation on an extremely congested project in the PNW.
03/08/2023

HRC 555 T-heads helping with installation on an extremely congested project in the PNW.

This is one creative way to stack a bundle of double-ended headed bars. Always great to see what HRC Approved Fabricator...
04/14/2021

This is one creative way to stack a bundle of double-ended headed bars. Always great to see what HRC Approved Fabricators are working on.

Subscribe to our official Youtube channel. We have installation videos from construction projects around the country.
01/21/2021

Subscribe to our official Youtube channel. We have installation videos from construction projects around the country.

Headed Reinforcement Corp. was established in 1990 in response to the special demands for high quality reinforcement in the seismic region of California. Bei...

Why replace standard hooks with headed bars?This video shows you some of the benefits from reducing congestion to speedi...
01/08/2021

Why replace standard hooks with headed bars?

This video shows you some of the benefits from reducing congestion to speeding up installation on a tower foundation currently under construction.

HRC 555 T-heads replaced standard hooks on shear ties in the 555 Tower foundation in Bellevue WA to help reduce congestion and accelerate the rebar installat...

Updated ICC-Es Report for HRC 500 Series Position Couplers.The Evaluation Report has been updated to include Grade 80 re...
10/23/2020

Updated ICC-Es Report for HRC 500 Series Position Couplers.

The Evaluation Report has been updated to include Grade 80 rebar and no longer requires a torque wrench to check installation (visual, hand tight to snug fit).

10/13/2020

We are presenting a brief webinar about headed bar applications as part of the NCSEA 2020 Virtual Structural Engineering Summit on Thursday, Oct. 15th at 3pm EST. You can register for free here: https://lnkd.in/gZEbgGq

Have you ever wondered what the differences are between a 4Ab and 9Ab head? Check out this article to learn more.
10/12/2020

Have you ever wondered what the differences are between a 4Ab and 9Ab head? Check out this article to learn more.

Introduction   This document has been prepared to address the common questions related to differences between 4Ab heads vs. 9Ab heads.   Background   Heads or headed bars are commonly described or referred to based on bearing area.   4Ab head Standard head in the US today – required by ASTM A9...

Address

11200 Condor Avenue
Fountain Valley, CA
92708

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Telephone

+17145571455

Website

Alerts

Be the first to know and let us send you an email when Headed Reinforcement Corporation - HRC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Headed Reinforcement Corporation - HRC:

Shortcuts

Share

Category