A&M Metal Forming

A&M Metal Forming A&M has been providing quality metal forming services to the steel erector, oil refinery, aerospace, and entertainment industries since 1952.

4 1/2" x 12" Steel Plate Rolled to a 47 1/2" Inside Diameter
11/28/2017

4 1/2" x 12" Steel Plate Rolled to a 47 1/2" Inside Diameter

This 2 1/2" sch 40 Brass Pipe was rolled 180 Degrees to a 15" Center Line Radius Holding Tangents with minimal ovality.
10/31/2017

This 2 1/2" sch 40 Brass Pipe was rolled 180 Degrees to a 15" Center Line Radius Holding Tangents with minimal ovality.

Our latest addition to provide increased capacity for our customers needs! Soon to be operational.
10/19/2017

Our latest addition to provide increased capacity for our customers needs! Soon to be operational.

This 3/4" Thick Steel Plate was formed to a multi radius conical section per customer supplied templates.
10/19/2017

This 3/4" Thick Steel Plate was formed to a multi radius conical section per customer supplied templates.

These 1/4" x 1" Brass Flat Bars Rolled the Easyway and 1/2" x 1" Brass Flat Bars Rolled the Hardway will be fabricated t...
10/19/2017

These 1/4" x 1" Brass Flat Bars Rolled the Easyway and 1/2" x 1" Brass Flat Bars Rolled the Hardway will be fabricated to create the support for a glass table top.

These Brackets were Sheared and Bent from 3/8" Thick A-36 Steel Plate using a 3/8" Inside Bend Radius
10/19/2017

These Brackets were Sheared and Bent from 3/8" Thick A-36 Steel Plate using a 3/8" Inside Bend Radius

If the Structural Tee you're looking for is not available, we can strip it out of a Beam. These WT 6x20 # Tees were spl...
10/17/2017

If the Structural Tee you're looking for is not available, we can strip it out of a Beam. These WT 6x20 # Tees were split from W 12x40 # Beams. Due to the inherent stress within the Beams, the stripped Tees will have a curve in them. We then straighten them back to mill tolerance.

1" sch 40 Steel Pipe Bent to 90 Degrees at 2.6" Center Line Radius for Light Fixtures.
10/17/2017

1" sch 40 Steel Pipe Bent to 90 Degrees at 2.6" Center Line Radius for Light Fixtures.

Plate, Beam, Pipe, Angle, Beam
10/16/2017

Plate, Beam, Pipe, Angle, Beam

Address

16935 S Broadway
Gardena, CA
90248

Opening Hours

Monday 7am - 4pm
Tuesday 7:30am - 4pm
Wednesday 7:30am - 4pm
Thursday 7:30am - 4pm
Friday 7am - 4pm

Telephone

(310) 329-2700

Website

Alerts

Be the first to know and let us send you an email when A&M Metal Forming posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to A&M Metal Forming:

Shortcuts

Share

Category