Victory Mechanical LLC

Home
United States
Granbury, TX
Victory Mechanical LLC

Electrical, Plumbing & HVAC Solutions. Installations
Repairs and Maintenance
Residential & Commercial
TACLB28043E-M14746-TECL35276

01/21/2026

CALL US TODAY!! (817) 438-8188

01/11/2026

Client reported intermittent lighting issues throughout the home. Upon inspection of the electrical panel, a loose/failed neutral connection was found on the neutral bar. Evidence of overheating and discoloration was observed at the neutral conductor termination. This condition can cause intermittent voltage fluctuations, flickering lights, and potential equipment damage. Neutral connection was identified as unsafe and requires corrective repair.

Every 3–5 years: Have a qualified electrician inspect the panel, including checking for loose or overheating connections.

Situations Where Checks Are More Important
• Older panels (20+ years)
• Aluminum branch wiring
• High-load circuits (HVAC, EV chargers, ranges)
• Homes with a history of flickering lights or neutral issues.

01/03/2026

Working on high bay gym lighting!

Outdated gym lighting? We replace old high bay fixtures with high-efficiency LED lighting that delivers brighter illumination, reduced maintenance, and major energy savings.

Perfect for schools, gyms, and athletic facilities.

12/23/2025

🚫 Not allowed
• NM cable directly contacting bare steel
• Running NM cable through EMT or rigid conduit for long distances
• Using NM cable in wet locations (outdoors, underground, concrete)
• Using conduit as a substitute for THHN wiring

✅ Best practices in steel construction

If steel framing is common, consider:
• MC (metal-clad) cable
• THHN/THWN conductors in conduit

These are often easier to inspect and more durable.

12/22/2025

This is not proper dryer venting.

From the photo, here’s why 👇
• Flexible foil duct is being used for a long run. These are not recommended (and often not code-compliant) for concealed spaces like attics because they trap lint easily.
• The duct has multiple bends and sags, which restrict airflow and increase lint buildup.
• It appears to run through an attic space, where lint buildup plus heat creates a fire risk.
• Proper dryer venting should be smooth, rigid metal duct, run as short and straight as possible, and vent directly outdoors.

What’s recommended
• Use 4-inch rigid or semi-rigid metal duct
• Minimize turns (each bend reduces airflow)
• Fully support the duct (no sagging)
• Seal joints with foil HVAC tape, not screws
• Vent directly to the exterior with a proper hood

This setup is a common safety issue and would likely be flagged during a home inspection.

12/20/2025

This could have been much worse. The electrical outlet had a loose connection, which caused it to overheat and melt.

Thankfully, no one was injured and there was no damage to the property.

12/19/2025

The homeowner was installing a shelf on a living room wall when a screw accidentally pierced the main electrical wire. The wiring had been improperly installed and was positioned directly against the sheetrock.

Fortunately, the homeowner was unharmed.

Safety Reminder: Always use caution when drilling or screwing into walls. As a best practice, use a multi-wall scanner to locate electrical wiring, plumbing, and framing to help prevent accidents like this.

12/16/2025

This room features an 18-foot ceiling and was originally without lighting. New LED lights have been professionally installed in the ceiling, significantly improving brightness and functionality.

Have a dark room? Give us a call or message us!

12/15/2025

Another happy client!
We replaced this patio light for our client.
Clean, solid finish, and great results.

12/13/2025

Need Electrical Service?
From small repairs to full electrical solutions we've got you covered.
Safe*Reliable*Affordable
Call or message us today!

06/26/2025

We are hiring helpers. Helpers will be working and learning 3 trades.
Electrical, Plumbing and HVAC.
Must be able to pass drug and background check.
Must have own transportation to get to office daily and will ride with a senior technician from there.
Must be on time.
Please send resume to [email protected]
Applications can be filled out @ 3230 Oak Trail Drive Granbury Texas from 8:30 AM to 4:30 PM Monday through Friday.

Address

3230 Oak Trail Drive
Granbury, TX
76048

Telephone

+18174388188

Website

http://www.victorymech.com/

Alerts

Be the first to know and let us send you an email when Victory Mechanical LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Victory Mechanical LLC:

Shortcuts

Want your business to be the top-listed Engineering Company in Granbury?