Redrocks Vapor Blasting

Redrocks Vapor Blasting Vapor blasting and small parts electroplating. The perfect processes for projects and restorations

It's alive- well sort of. First start and there is a whistling noise that isn't the supercharger itself although it does...
08/01/2026

It's alive- well sort of. First start and there is a whistling noise that isn't the supercharger itself although it does make the appropriate noises. It has a pretty good sized vacuum leak from a 3d printed fl**ge that wasn't very flat and that is absolutely shrieking like a jet engine. Also it would not take throttle very well, probably because of the vacuum leak. But hey, i expected things to need tweaking, fixing and tuning. After finding the leak i lapped that part flat on a piece of granite starting with 80 grit then on to 120, and 400. I will put this back on tomorrow see if things are better. I am not concerned about the runners being sealed as they have an o ring in compression.. Also need to wire up the EGT probes and display

This is what i have been working on most recently, a joint project with my friend who owns the car, a Triumph TR6. All ...
07/06/2026

This is what i have been working on most recently, a joint project with my friend who owns the car, a Triumph TR6. All my 3D printed aluminum parts look fantastic after v***r blasting and are ready to go! I am getting close to having it running with its new setup. I just received my redesigned inlet runners and 6 rib pulley. All the holes that needed threads have now been tapped, gaskets have been printed and carb mounting isolator made, I modified the throttle arm and moved the cable securing tab from its original location. For some reason there is no pull type cable arm for 48DCOE so i had to modify one for a 45. One thing i did notice about 3d printed aluminum is that it welds really nicely. No problem at all which is what you might expect from super clean and uniform density material. I am printing a new connector hose for the diverter valve and should have that in place tomorrow. All that is left is everything else!

Here are a bunch of Jag parts i just blasted for a personal project. What can i do to help with your projects?
07/04/2026

Here are a bunch of Jag parts i just blasted for a personal project. What can i do to help with your projects?

I haven't posted for a while because i have been super busy with about 20 projects at once. It's a bit like setting your...
04/21/2026

I haven't posted for a while because i have been super busy with about 20 projects at once. It's a bit like setting your hair on fire! Anyway heres a photo dump of whats been going on. Some of it is v***r blasting, some design work, fabrication, rebuilding, 3d printing and working on a bunch of Jags.

Address

590 N Westgate Drive
Grand Junction, CO
81505

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+18185346838

Website

Alerts

Be the first to know and let us send you an email when Redrocks Vapor Blasting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category