AEC Systems, LLC

11/02/2026

How do you remove mill oils from rolled sheet metal as it moves through production?

AEC Systems designed this custom Rolled Sheet Metal Washer to process spooled sheet metal at a rate of 225 feet per minute. As the material passes through the system, it is washed, rinsed, and dried to remove mill oils.

The cleaning process can take place before or after stamping, depending on the application.

Take a closer look at this custom washing system: https://www.aecsystemsusa.com/industrial-parts-washers/rolled-sheet-metal-washer/

10/31/2026

Wishing you a spook-tacular holiday filled with fun, laughter, and plenty of treats! 👻🍬🎃

10/28/2026

Not every part fits neatly into a standard washing system. When designing industrial cleaning equipment, AEC Systems considers more than just the contaminants being removed. Part dimensions, geometry, handling requirements, and available space can all influence the equipment design.

It's why understanding the application is such an important part of developing a custom parts washer.

Learn more about AEC Systems' custom washing solutions: https://www.aecsystemsusa.com/industrial-parts-washers/

10/26/2026

Think your production requirements are too demanding for a cabinet-style parts washer?

AEC Systems designed this Four Turntable Washer with four rotating turntables and separate wash manifolds. Each turntable can accommodate an engine block weighing up to 500 pounds, measuring up to 20 inches in diameter and 36 inches tall.

It's an example of how a cabinet washer can be configured to handle multiple large parts within a single system.

See the Four Turntable Washer: https://www.aecsystemsusa.com/industrial-parts-washers/four-turntable-washer/

10/23/2026

Cleaning the part may not always be the last step.

When rust prevention is part of your requirements, AEC Systems can incorporate a rust-preventative stage into the washing system. It’s another example of why the cleaning process should be designed around what the finished part actually needs.

Learn more about adding rust preventative to a parts washing system:
https://www.aecsystemsusa.com/parts-washer-rust-preventative/

This parts washer was built for a customer who needed to coat their parts with rust preventative to protect them.

10/21/2026

Not every part can be cleaned with a spray wash alone.

For parts with internal cavities or applications where cleaning chemicals need additional time to work, submersion and agitation provide another approach to industrial parts cleaning.

See an AEC Systems Industrial Dip Tank with Agitation Washer in action!

An Industrial Parts Washer that is an Agitation Dip Tank Washer by ...

10/19/2026

One cycle is running. The next load is getting ready.

AEC Systems’ Dual Door Cabinet Washer allows an operator to load one turntable while parts on the other are being cleaned. When the cycle is complete, the operator switches doors and starts the next cycle, reducing parts handling time from the total cleaning time.

See how the Dual Door Cabinet Washer works:
https://www.aecsystemsusa.com/industrial-parts-washers/dual-door-cabinet-washer/

10/16/2026

The effects of solvent exposure may last long after the exposure ends.

For manufacturers, it's an important reminder that cleaning performance isn't the only consideration when evaluating industrial parts cleaning methods. The chemicals used and their potential health and environmental impacts matter, too.

Learn more about solvent exposure risks and aqueous cleaning alternatives.

There are many serious consequences of solvent exposure. AEC is committed to designing safer parts cleaning systems.

10/14/2026

Choosing a parts washer starts with understanding the application.

What parts are being cleaned? How many need to be processed? How will they be loaded and unloaded? What contaminants are being removed? Those details help determine what type of cleaning system makes sense for the job.

AEC Systems designs custom parts washers around the specific requirements of the parts and cleaning application.

Learn more: https://www.aecsystemsusa.com/washer-of-the-month-for-april-2021-the-best-parts-washer/

10/12/2026

Inside and out, all while the part rotates.

For this custom Cabinet Spray Washer, AEC Systems designed a vertical-driven turntable to hold and rotate a tube during the cleaning cycle. Spray nozzles clean both the inside and outside of the tube, followed by a blow-off cycle that dries the part as it continues to rotate.

See this custom washer in action: https://www.aecsystemsusa.com/washer-of-the-month-industrial-cabinet-spray-washer-with-a-vertical-mount-turntable/