HotWorks Fab Shop

HotWorks Fab Shop We are also equipped for "on-site" welding and fab services.

HotWorks Fab Shop, owned by Curt and Jared Hasselbring focusses on farm equipment repair and welding all types of alloys including aluminum, stainless steel, cast iron, and carbon steel.

Just finished making this curved cat walk to go around a curved milking parlor at a new dairy farm. It was built in sect...
08/19/2026

Just finished making this curved cat walk to go around a curved milking parlor at a new dairy farm. It was built in sections that lock together at the feet. It is made out of stainless square tube that we roll bent to match the radius of the milking parlor.

Been really busy in the shop lately. Here are pictures of some jobs over the past month. We've been building new semi tr...
08/11/2026

Been really busy in the shop lately. Here are pictures of some jobs over the past month. We've been building new semi trailer frames, king pin plates and hydraulic arms to till out individual rows of corn. If you need something custom made we can help!

Just fixed this big hole in a semi tanker! We cut out the old damaged metal and bent a new plate to match what it was li...
07/01/2026

Just fixed this big hole in a semi tanker! We cut out the old damaged metal and bent a new plate to match what it was like originally. We also reinforced the seam with another piece of plate to make it stronger than what it was originally.

We've worked on a handful of combines here over the last few weeks getting ready for wheat. This one had some major fram...
06/26/2026

We've worked on a handful of combines here over the last few weeks getting ready for wheat. This one had some major frame damage. We hade to use hydraulic jacks to push the frame back into place before welding it all back together.

Just finished building this stainless steel semi tanker frame for a customer. We replaced the old steel one with stainle...
06/09/2026

Just finished building this stainless steel semi tanker frame for a customer. We replaced the old steel one with stainless so it should out last the life of the tank. If you need major trailer repair work we can help you out.

Just finished testing a customers mini jet boat on our flooded creek yesterday. We built the whole thing from scratch in...
05/28/2026

Just finished testing a customers mini jet boat on our flooded creek yesterday. We built the whole thing from scratch in our shop. If you're looking for a shallow water creek boat that goes 60mph let us know!

Just finished working on this pay loader with a bent boom. The boom is made out of 1 1/2'' thick plate and very difficul...
04/22/2026

Just finished working on this pay loader with a bent boom. The boom is made out of 1 1/2'' thick plate and very difficult to bend. We decided to cut out the bent section of boom and weld in a new piece. The loader is in good working order again now and we were able to save the customer a lot of money compared to buying a new boom.

04/14/2026

Build your own hog gates with our hog gate fixturing jig. Let us know if you are interested!

We've been fixing a lot of damaged aluminum trailers lately. The back end on this trailer was damaged so we cut out the ...
04/07/2026

We've been fixing a lot of damaged aluminum trailers lately. The back end on this trailer was damaged so we cut out the bent up metal and remade it.

Address

Greensburg, IN
47240

Website

Alerts

Be the first to know and let us send you an email when HotWorks Fab Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to HotWorks Fab Shop:

Shortcuts

Share

Category