K&C Welding & Metalworking

K&C Welding & Metalworking Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from K&C Welding & Metalworking, Metal Fabricator, Pine Street, Halifax, PA.

Late week frame repair. This will have to come back for more frame work. And rear cab mount repairs. This was to hav the...
06/12/2026

Late week frame repair. This will have to come back for more frame work. And rear cab mount repairs. This was to hav thel tank dropped. But not with almost a full tank of fuel. No big deal just misunderstanding. I finish this one earlier next week when it's comes back.

Thanks to Brian Lenker
For Choosing
K&C WELDING & FABRICATION LLC.

Also got the Dodge Ram done today. This one needed some frame & cross tube repairs. The rust was tough getting out. Nice...
06/10/2026

Also got the Dodge Ram done today. This one needed some frame & cross tube repairs. The rust was tough getting out. Nice easy job for early, mid week. Sometimes that's nice

Thanks to our local Garages
From
K&C WELDING & FABRICATION LLC.

Finished up the old Chevy 1500 Monday. I did the D/S rocker a week ago. And now just finished up the fenders. Thanks to ...
06/10/2026

Finished up the old Chevy 1500 Monday. I did the D/S rocker a week ago. And now just finished up the fenders.

Thanks to Dennis
For Choosing
K&C WELDING & FABRICATION LLC.

So then I jump right on to the next job. Witch the front bed wall was rusted apart from the floor. The front bed crossm...
06/03/2026

So then I jump right on to the next job. Witch the front bed wall was rusted apart from the floor. The front bed crossmember needs fixed also. So far its going good. This truck has a bed liner that will go back in after I primer the new steel.

Thanks to Dennis Bowman
For Choosing
K&C WELDING &FABRICATION LLC.

Old Chevy is coming along good. D/S rocker is done. I had to do a little inner rocker repair as well. Rear back corner h...
06/03/2026

Old Chevy is coming along good. D/S rocker is done. I had to do a little inner rocker repair as well. Rear back corner has seam sealer on it I'm letting it dry. That's why no primer there. I still have the fenders to do but I'm out of 20ga till tomorrow.

Thanks to Dennis
For Choosing
K&C WELDING & FABRICATION LLC.

06/03/2026

Thanks to Dave at Keller Towing.
I did some more work on another one his rollback. Added some stuff and change a few things. I forgot to take pics. To busy getting it done.

Thanks for Choosing
K&C WELDING & FABRICATION LLC.

Move right on to the next truck. Just started cutting out the D/S rocker for today. Needs a little fender work to.Thanks...
06/02/2026

Move right on to the next truck. Just started cutting out the D/S rocker for today. Needs a little fender work to.

Thanks to Dennis
For Choosing
K&C WELDING &FABRICATION LLC.

Started the week with a easy frame repair. Thanks to Tom For Choosing K&C WELDING & FABRICATION LLC.
06/02/2026

Started the week with a easy frame repair.

Thanks to Tom
For Choosing
K&C WELDING & FABRICATION LLC.

Also fixed this broken front wheel on one of C&E Lawncare mowers
05/30/2026

Also fixed this broken front wheel on one of C&E Lawncare mowers

Finished up the week on this Chevy 2500. D/S rocker replaced. D/S frame repair & P/S rear rocker replaced. Primered & f...
05/30/2026

Finished up the week on this Chevy 2500. D/S rocker replaced. D/S frame repair & P/S rear rocker replaced. Primered & finished with undercoat.

Thanks to C&E Lawncare
For Choosing
K&C WELDING & FABRICATION LLC.

Address

Pine Street
Halifax, PA
17032

Opening Hours

Monday 8:30am - 5:30pm
Tuesday 8:30am - 5:30pm
Wednesday 8:30am - 5:30pm
Thursday 8:30am - 5:30pm
Friday 8:30am - 5:30pm
Saturday 9am - 1pm

Website

Alerts

Be the first to know and let us send you an email when K&C Welding & Metalworking posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category