We provide resinous flooring systems for residential and commercial spaces that require a safe, clean, durable, and aesthetically pleasing flooring solution. Process:
Day 1:
Our certified installers will start by filling any pits and cracks and then diamond grind the entire surface of your concrete with our state-of-the-art, industry leading diamond grinder. from the surface while opening millions of micro pores within the surface of the concrete. We will then apply our epoxy (See Why Epoxy below) primer base coat to the surface of your concrete. Day 2:
We will run our diamond grinder over the base coat to knock down any high spots as well as scratch the surface of the floor to ensure both a chemical and mechanical bond between the first and second coat. We then put an even layer of epoxy across the floor in which we will broadcast a decorative chip of your choice into. Day 3:
We will then seal the entire surface with a polyaspartic, clear, top coat, which is 4 times stronger than epoxy. Upon completion, there will be:
no waxing,
no polishing,
no buffing,
no re-sealing,
no yellowing,
no wearing,
no staining,
no fading. Titan only uses the best in commercial and industrial products. Drive a car on it, roll an airplane across it, spill chemicals on it... Titan Floors are guaranteed to look like new for many years to come. WHY EPOXY ........ 1-Day System vs. Why in the world would you choose a 3-day flooring system over a one-day? Simple, our first coat, the epoxy primer base coat, takes 12-14 hours to set allowing it to soak into the opened pores of the concrete. This ensures not only a solid foundation to build the rest of your floor off of but strengthens the slab of the concrete as well. Their one-day system starts with a very fast setting Polyurea Basecoat. Due to its fast-setting characteristics, it will have much less time to soak into the pores of the surface. This will result in little to no added strength to the concrete itself.
Maintenance:
The ONLY maintenance our floors will require is dry and wet mopping, as needed, with a PH-neutral cleaner such as Simple Green diluted with water.