Salvagnini Group

09/24/2026

Six bends in less than ten seconds, with P2 keeping the rhythm.

08/06/2026

From 120 panels per shift to 300. Same plant. Same shift length.

Cerenn Industrie builds high-acoustic removable steel partitions in Sarre-Union for the French and European market , a subcontracting business where capacity ceilings cap growth directly.

They installed a Salvagnini flexible manufacturing system: MBT bi-tower store, SMD, S4, MCU and P4 linked into one continuous, autonomous chain. Material moves from store to finished panel without an operator staging each step.

What changed:
• Output: 120 → 300 panels/shift
• Scrap: down another 30%
• Energy: down 70%
• Weekends: running unmanned

The capacity to take on more subcontracting work wasn't a hiring decision. It was an automation decision.

Read the full case study:
https://www.salvagninigroup.com/en-US/resources/case-study-cerenn-industrie

08/05/2026

Most panel benders force your parts to fit the machine.

Change materials, add a tricky fl**ge, run a short batch, and now suddenly you're building tooling, re-sequencing jobs, or eating idle time between changeovers.

Salvagnini's approach starts before the machine: a feasibility study of your actual mix, not a spec sheet. The bender's tooling adapts automatically across the range of your work, so a batch of one runs at the same rhythm as a batch of 500, no manual tool changes, no re-teaching.

The question isn't "what can the machine do." It's "what does your production need it to do."

Interested in a feasibility study on your part mix? Get in touch.
https://www.salvagninigroup.com/en-US/contact-us

07/30/2026

When your customers invest in their future, you invest alongside them.
A few weeks ago, we signed an $8 million expansion of our Hamilton, Ohio headquarters. New jobs. New capabilities. Deeper support for manufacturers across North America. As our customers grow and invest in automation, we're growing right there with them.

That same commitment is changing how we meet you. This year, we've decided not to exhibit at FABTECH. Instead of a crowded booth and a five-minute conversation, we're doubling down on Salvagnini Xperience, open-house events where you spend real time with our team, in front of our machines, watching the technology run in live production on your own parts and applications. It's a longer, more honest look than any trade show floor allows.

The feedback has been outstanding, so we're adding new fall dates in Ohio and Europe, the first right here in Hamilton, September 1–2.

We'd be honored to welcome you. Hear the full story in the video below, then come see it for yourself.

Register → https://xperience-sai.brizy.site/

07/29/2026

The best conversations in sheet metal rarely happen on a trade show floor, they happen when you're standing next to the machine, talking shop with someone who's solved the problem you're facing.

That's what Xperience is.

On September 1st and 2nd we're opening our doors to manufacturers, innovators, and problem-solvers who want to see what system-wide automation actually looks like running, and to spend a day with the people building it.

07/22/2026

"Hours to :45 seconds." That's what one customer said after watching it happen... before they placed an order.

That's what Xperience is for. You don't get pitched. You watch the technology run your kind of work, talk to the people who run it every day, and decide for yourself.

September 1st and 2nd · Hamilton, Oh - Salvagnini America Campus.

Spots are limited 👉 https://xperience-sai.brizy.site/

07/21/2026

Are you focused on speeding up the wrong thing?

Every handoff is a place where a part waits, a cart gets loaded, an operator gets pulled off another job.

Shaving seconds off one machine means nothing if the part then sits for two hours before the next one.

That's the real fix: velocity. Material flowing machine-to-machine on its own: no queue, no handling and no waiting.

Watch it. 👇

07/17/2026

250 years of American manufacturing and 50 years of bending it better.

The NextGen4 system, P2 Panel Bender, B3 Press Brake, L3 Laser with ADC,is available now on accelerated delivery with preferred financing through September 30.

4.99% APR. Up to 60 months or Zero down for qualified buyers.

Erhart documented 40% faster production and 55% lower energy consumption after making the switch. That's the number that matters.

Reserve your system before Q3 closes.

07/17/2026

The assist and the finish every part, every time.

On the L3 laser, the cut is clean and fast. Then NEXUS takes over: the software reads each part's geometry, defines the grip points, and sequences the MCU manipulator to pick and stack it.. no operator needed.

It's the kind of one-two you'd want on your World Cup roster. The laser sets it up, the software calls the play, the automation finishes it and it doesn't miss.

Watch it work. 🎥

07/16/2026

Partnerships. Possibilities. Potential.

This September, experience innovation firsthand.

Join us for the Salvagnini America Xperience on Tuesday, September 1 or Wednesday, September 2, and enjoy exclusive access to our advanced manufacturing technologies, engineering expertise, and collaborative environment.

Explore live automation solutions, gain valuable insights from our team, and engage in meaningful conversations about the opportunities shaping the future of fabrication. Whether you're looking to improve productivity, increase flexibility, or discover new possibilities, this exclusive visit is designed with you in mind.

Be our guest. We look forward to welcoming you to the Salvagnini Campus for one day of innovation, collaboration, and inspiration.

07/14/2026

"We don't have to break any cassettes. The parts are going directly through the bending station... and within the scrap, we can use nesting programs to cut parts we're using in most of our production, stiffeners, as an example."

"Prior, we needed a guy bringing the pallet to the bender, explaining to the bender when he needed to do all the programming, then the bending sequence. Now, a minute."

- Julien Bergeron, COO, Cyrell AMP

One machine change. One labor problem solved.

S4 → P4. See it in the video.

04/05/2026

🌿🐣 Happy Easter to all Salvagnini colleagues, customers, and partners! 😊

03/20/2026

🌙 Salvagnini wishes a happy Eid Mubarak to all the Muslim colleagues, clients and friends around the world! 🌍

12/18/2025

When quality is a given, design blooms. 🎄❤️✨ Best Wishes from Salvagnini.

11/28/2025