The Rodon Group

09/30/2026

𝗠𝗼𝗶𝘀𝘁𝘂𝗿𝗲 𝗹𝗲𝗮𝗸𝘀 𝗺𝗮𝘆 𝘀𝘁𝗮𝗿𝘁 𝘀𝗺𝗮𝗹𝗹, 𝗯𝘂𝘁 𝘁𝗵𝗲 𝗱𝗮𝗺𝗮𝗴𝗲 𝘁𝗵𝗲𝘆 𝗰𝗮𝘂𝘀𝗲 𝗰𝗮𝗻 𝗯𝗲𝗰𝗼𝗺𝗲 𝘀𝗲𝗿𝗶𝗼𝘂𝘀 𝗳𝗮𝘀𝘁.

At SillDry, we know that unchecked moisture can lead to material rot, structural deterioration, mold, and mildew—issues that can affect both the safety of your building and the health of the people inside.

One of the biggest mistakes home and business owners make is treating the symptom instead of finding the source. Ignoring moisture problems or relying on temporary fixes can allow hidden damage to continue behind the scenes.

The right approach starts with identifying the root cause and addressing it before a small leak becomes a costly repair.
Learn more: https://www.silldry.com/blog/common-mistakes-for-moisture-leaks

09/17/2026

𝗧𝗵𝗲 𝗥𝗼𝗱𝗼𝗻 𝗚𝗿𝗼𝘂𝗽'𝘀 𝗰𝘂𝘀𝘁𝗼𝗺 𝗽𝗹𝗮𝘀𝘁𝗶𝗰 𝗶𝗻𝗷𝗲𝗰𝘁𝗶𝗼𝗻 𝗺𝗼𝗹𝗱𝗶𝗻𝗴 𝗴𝗶𝘃𝗲𝘀 𝗺𝗮𝗻𝘂𝗳𝗮𝗰𝘁𝘂𝗿𝗲𝗿𝘀 𝘁𝗵𝗲 𝗽𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻, 𝗲𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝗰𝘆, 𝗮𝗻𝗱 𝗳𝗹𝗲𝘅𝗶𝗯𝗶𝗹𝗶𝘁𝘆 𝘁𝗵𝗲𝘆 𝗻𝗲𝗲𝗱 𝘁𝗼 𝗯𝗿𝗶𝗻𝗴 𝗵𝗶𝗴𝗵-𝗾𝘂𝗮𝗹𝗶𝘁𝘆 𝗽𝗮𝗿𝘁𝘀 𝘁𝗼 𝗹𝗶𝗳𝗲.

As one of the most versatile methods for plastic part production, injection molding enables fast, reliable manufacturing and delivers consistent results even for the most complex part designs.

From enhanced strength and material flexibility to reduced waste and lower labor costs, custom injection molding offers a smarter path to scalable, repeatable production.

When precision matters, the right molding partner can help turn complex requirements into dependable, production-ready parts.
Learn more: https://www.rodongroup.com/plastic-injection-molding/

08/27/2026

𝗙𝗲𝘄 𝘁𝗵𝗶𝗻𝗴𝘀 𝗶𝗻 𝗹𝗶𝗳𝗲 𝗮𝗿𝗲 𝗲𝗮𝘀𝗶𝗲𝗿 𝘁𝗵𝗮𝗻 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗶𝗻𝗴 𝗦𝗶𝗹𝗹𝗗𝗿𝘆.

Designed for fast installation and long-term performance, SillDry takes only seconds to install—delivering a lifetime of protection where it matters most.

Want to see how simple it is?
Complete our Request for Demo form:
https://www.silldry.com/request-for-demo

If your location is not in the PA/NJ/DE tri-state area, your demo will be provided via video.

08/13/2026

𝗙𝗲𝗮𝘁𝘂𝗿𝗲 𝗔𝗿𝘁𝗶𝗰𝗹𝗲: 𝗪𝗵𝗲𝗻 𝗠𝗶𝗹𝗹𝗶𝗼𝗻𝘀 𝗼𝗳 𝗣𝗮𝗿𝘁𝘀 𝗔𝗿𝗲 𝗮𝘁 𝗦𝘁𝗮𝗸𝗲, 𝗣𝗲𝗻𝗻𝗶𝗲𝘀 𝗠𝗮𝘁𝘁𝗲𝗿

When you’re producing millions of plastic components a year, pennies don’t just matter—they can define your margins.
In high-volume manufacturing, even a one-cent reduction in piece-part cost can add up to hundreds of thousands of dollars in annual savings.

But realizing those savings takes more than a low quote. It requires automation, process control, precision tooling, and a supplier built to deliver consistent quality at scale.

In this article, The Rodon Group helps manufacturers reduce total cost of ownership through advanced robotics, vertically integrated manufacturing, and one of the largest automated plastic injection molding operations in the United States.

𝗥𝗲𝗮𝗱 𝘁𝗵𝗲 𝗳𝘂𝗹𝗹 𝗮𝗿𝘁𝗶𝗰𝗹𝗲: https://www.rodongroup.com/blog/high-volume-plastic-injection-molding-in-the-usa/

In high-volume manufacturing, even a one-cent reduction in piece-part cost can translate into hundreds of thousands of dollars in annual savings. For

07/30/2026

𝗔𝘁𝘁𝗲𝗻𝘁𝗶𝗼𝗻 𝗔𝗿𝗰𝗵𝗶𝘁𝗲𝗰𝘁𝘀! 𝗗𝗲𝘀𝗶𝗴𝗻𝗶𝗻𝗴 𝗮 𝗯𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝗰𝗼𝗻𝗳𝗶𝗱𝗲𝗻𝗰𝗲 𝗺𝗲𝗮𝗻𝘀 𝗽𝗹𝗮𝗻𝗻𝗶𝗻𝗴 𝗳𝗼𝗿 𝘄𝗵𝗮𝘁 𝘆𝗼𝘂 𝗰𝗮𝗻’𝘁 𝗮𝗹𝘄𝗮𝘆𝘀 𝘀𝗲𝗲 𝗰𝗼𝗺𝗶𝗻𝗴.

When architects design a building, every component matters—because small details can lead to big outcomes over time. Integrity, functionality, and longevity all depend on solutions that help mitigate risk at the building envelope.

𝗧𝗵𝗮𝘁’𝘀 𝘄𝗵𝗲𝗿𝗲 𝗦𝗶𝗹𝗹𝗗𝗿𝘆 𝗰𝗼𝗺𝗲𝘀 𝗶𝗻. With flashing solutions built for performance and protection, SillDry helps reduce one more area of concern—so your work can stay focused on the vision, not the variables.

𝗘𝘅𝗽𝗹𝗼𝗿𝗲 𝘁𝗵𝗲 𝗮𝗿𝗰𝗵𝗶𝘁𝗲𝗰𝘁-𝗳𝗼𝗰𝘂𝘀𝗲𝗱 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻 𝗵𝗲𝗿𝗲:
https://www.silldry.com/architect

07/16/2026

𝗧𝗵𝗲 𝗥𝗼𝗱𝗼𝗻 𝗚𝗿𝗼𝘂𝗽 𝗳𝗼𝗿 𝗬𝗼𝘂𝗿 𝗣𝗹𝗮𝘀𝘁𝗶𝗰 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹 𝗡𝗲𝗲𝗱𝘀

At The Rodon Group, we specialize in plastic injection molding using strong, reliable plastic materials—because the right material choice can make all the difference in performance, durability, and long-term results.

We take the time to understand your application and help you choose the best resin options with the right guidance along the way.

𝗪𝗮𝗻𝘁 𝘁𝗼 𝗹𝗲𝗮𝗿𝗻 𝗺𝗼𝗿𝗲 𝗮𝗯𝗼𝘂𝘁 𝗰𝗼𝗺𝗺𝗼𝗻 𝗺𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝘂𝘀𝗲𝗱 𝗶𝗻 𝗶𝗻𝗷𝗲𝗰𝘁𝗶𝗼𝗻 𝗺𝗼𝗹𝗱𝗶𝗻𝗴?
Check out our Top 5 Common Resins blog:
https://www.rodongroup.com/blog/top-5-most-common-plastic-resins/

𝗡𝗲𝗲𝗱 𝗵𝗲𝗹𝗽 𝘀𝗲𝗹𝗲𝗰𝘁𝗶𝗻𝗴 𝘁𝗵𝗲 𝗿𝗶𝗴𝗵𝘁 𝗿𝗲𝘀𝗶𝗻 𝗳𝗼𝗿 𝘆𝗼𝘂𝗿 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀?
Read our How to Choose the Best Resin Material blog:
https://www.rodongroup.com/blog/how-to-choose-the-best-resin-material-for-your-part/

𝗙𝗼𝗿 𝗮𝗻 𝗼𝘃𝗲𝗿𝘃𝗶𝗲𝘄, 𝘄𝗮𝘁𝗰𝗵 𝘁𝗵𝗲 𝘃𝗶𝗱𝗲𝗼:
https://www.youtube.com/watch?v=OvMEY_dOP1A&time_continue=24&source_ve_path=NzY3NTg&embeds_referring_euri=https%3A%2F%2Fwww.rodongroup.com%2F

06/30/2026

𝗙𝗹𝗮𝘀𝗵𝗶𝗻𝗴 𝗦𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝗳𝗼𝗿 𝘁𝗵𝗲 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗘𝗻𝘃𝗲𝗹𝗼𝗽𝗲

Protecting a building’s interior from the elements is one of the biggest challenges in any construction project—especially when it comes to moisture pe*******on, air infiltration, and temperature fluctuations.

A key part of getting that right is building-envelope flashing: a weather-resistant seal at joints. But many traditional flashing approaches can be costly, labor-intensive, and sometimes even ineffective, leading to higher spend and more time spent chasing a reliable seal.

SillDry is an innovative, zero-waste, injection-molded flashing solution designed to help solve these issues. Compared to traditional options, SillDry is cheaper and easier to install, while still delivering enhanced insulation and drainage performance.

Learn more here:
https://www.silldry.com/about/flashing-solutions-for-building-envelope

06/15/2026

𝗖𝗼𝗻𝗴𝗿𝗮𝘁𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀 𝘁𝗼 𝘁𝗵𝗲 𝗥𝗼𝗱𝗼𝗻 𝗚𝗿𝗼𝘂𝗽 𝗟𝗲𝗮𝗱𝗲𝗿𝘀𝗵𝗶𝗽 𝗣𝗿𝗼𝗴𝗿𝗮𝗺 𝗚𝗿𝗮𝗱𝘂𝗮𝘁𝗲𝘀!

The Rodon Group is proud to recognize the graduates of the Central Bucks Chamber of Commerce Leadership program:
John Wilson and Kyle Coblentz.

Additional graduates (not pictured): Jesse Putnam and Joe McDonough.

This program helps build strong leaders and fosters meaningful connections across our community—an accomplishment worth celebrating!
https://www.rodongroup.com/

05/28/2026

𝗦𝗶𝗹𝗹𝗗𝗿𝘆 - 𝗙𝗮𝘀𝘁𝗲𝗿, 𝗘𝗮𝘀𝗶𝗲𝗿, 𝗠𝗼𝗿𝗲 𝗖𝗼𝘀𝘁-𝗘𝗳𝗳𝗲𝗰𝘁𝗶𝘃𝗲
Builders aren’t looking for “just another sill pan”—they’re looking for a reliable moisture barrier that’s fast to install and easy to get right the first time.
SillDry is designed to help prevent water intrusion with a simpler, code-compliant approach.

• 𝗙𝗶𝘁𝘀 𝗮𝗹𝗺𝗼𝘀𝘁 𝗮𝗻𝘆𝘄𝗵𝗲𝗿𝗲: Accordion design spans 18 inches to 12 feet—reducing measuring and eliminating on-site assembly.
• 𝗢𝗻𝗲-𝗽𝗶𝗲𝗰𝗲 𝗶𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻: Arrives in one piece, installs with one point of attachment on each side.
• 𝗣𝗿𝗲-𝘀𝗹𝗼𝗽𝗲𝗱 𝘀𝗶𝗹𝗹𝘀: Help avoid shims and reduce the need for measuring/cutting.
• 𝗪𝗲𝗮𝘁𝗵𝗲𝗿-𝗳𝗿𝗶𝗲𝗻𝗱𝗹𝘆: Can be installed in any weather, minimizing project delays.
• 𝗟𝗼𝘄𝗲𝗿 𝘄𝗮𝘀𝘁𝗲 & 𝗹𝗼𝘄𝗲𝗿 𝗹𝗮𝗯𝗼𝗿: Reduced material waste and fewer labor requirements can help drive down installation costs.
• 𝗖𝗼𝗱𝗲 𝗰𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝗰𝗲: Meets and exceeds relevant 2018 ICC and IRC building codes.

Want to make your next installation faster and more consistent? Request a SillDry spec sheet or installation support today—and we’ll help you choose the right solution for your openings.
https://www.silldry.com/request-for-quote

05/14/2026

𝗙𝗿𝗼𝗺 𝗖𝗼𝗻𝗰𝗲𝗽𝘁 𝘁𝗼 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗶𝗼𝗻 - 𝗖𝘂𝘀𝘁𝗼𝗺 𝗠𝗼𝗹𝗱𝗲𝗱 𝗣𝗹𝗮𝘀𝘁𝗶𝗰 𝗙𝗮𝘀𝘁𝗲𝗻𝗲𝗿𝘀
The Rodon Group is an industry-leading custom plastic injection molding provider, producing billions of high-quality parts each year.

We’re proud to be a U.S. manufacturer, and with 125+ injection molding presses, we’re one of the largest family-owned molders in the country.

At Rodon, our team pairs deep molding expertise with a comprehensive approach to part design—delivering results from concept through production.

𝗥𝗲𝗮𝗱𝘆 𝘁𝗼 𝗯𝗿𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗻𝗲𝘅𝘁 𝗽𝗮𝗿𝘁 𝘁𝗼 𝗹𝗶𝗳𝗲?
Contact Rodon today to discuss your design and get a fast, collaborative path from concept to production. https://www.rodongroup.com/request-quote/