AMOT

Name: AMOT
Address: 8824 Fallbrook Drive, Houston, TX, 77064, US
Telephone: +18885662668

Call Directions Website Contact the business

Control, safety, and monitoring technologies for engines, turbines, compressors, and other industrial equipment.

AMOT, is a business of AMETEK – a leading global provider of industrial technology solutions serving a diverse set of attractive niche market

10/09/2026

Canada in January. A compressor station near the equator. Mounted right next to an engine block.

Three very different jobs, and one temperature rating covers all of them: −40°C to 125°C.

Braden Morris breaks down why that range matters, and how AMOT's quarter-turn actuator is built for extreme temperatures. ▶️

09/30/2026

14.1 GRMS random vibration. 10 to 1,000 Hz. 20 hours on every axis.

That's the shaker table test we put our 24VDC Electric Rotary Actuator through before it ever reaches a frac site.

Vibration is one of the biggest reasons equipment fails in the red zone. No standard test matched what we see in the field, so we built our own. Random vibration hits every frequency at once, just like the real thing.

The verdict? "From a vibration standpoint, this is a tank."

09/24/2026

"Can you make it do this instead?"

Yes. That question has been answered at AMOT since 1948, and a good number of the products in our catalog today exist because somebody asked it.

Any AMOT product can be modified to fit your application. Custom ball profiles, custom end connections, different temperature ranges, different port sizes, different controls. And when a modification won't do it, our engineers design from a blank sheet.

In-house design. In-house validation. Volumes from a pilot run to full production.

Modified or ground-up. Built for your exact application.

Got a spec nobody will quote? Send it to our engineering team.

09/15/2026

What does "rugged electric" actually look like?

A few years back we went looking for an actuator that would hold up in deep cold, mount directly on-engine, and survive continuous vibration. Nothing measured up.

So we built our own, from the ground up.

The AMOT EH Series electric rotary actuator: −40°C to +125°C, 14.1 GRMS vibration, 1,000,000+ cycles at rated load.

09/10/2026

Meet Marti Davalos, Accounts Payable Specialist at AMOT Controls.

Marti joined our finance team almost four years ago, and in that time she's helped move our accounts payable process from manual entry to automated invoicing and electronic payments.

“As a key participant, it was very rewarding to implement our Automated AP Workflow and EDS payment system. It was a challenging project, but my team is very encouraging and supportive — it's one of my favorite parts of working here."

We are so proud to have people like Marti on our team.

08/13/2026

Meet Riley Kostiuk, Senior Design Engineer at AMOT Controls.

Riley's been on our actuator team for three and a half years, working on everything from early design and testing on the EH Series to building out the systems that keep quality consistent as production has scaled. But ask Riley what makes the work possible, and the answer isn't any one person; it's the team behind it.

"Between the team, we've got a really wide range of knowledge and design philosophies, and that's what lets us build something as complex as our actuator. If I've got a question, I can lean on Guy or Jesse, and it goes the other way too. Nobody's ever stuck waiting on one person. If I'm busy, whoever's covering for me can pick up right where I left off and keep things moving. That's what lets us develop good products quickly, without cutting corners."

Different strengths, one team, and a product that's better for it.

hashtag hashtag hashtag hashtag hashtag

08/12/2026

Before you can blink, the 4420 has already shut the fuel off.

Under 100 milliseconds, spring-return, stainless steel, certified for hazardous areas and sour service. When a gas turbine trips, there's no time to wait. The 4420 doesn't.

Comment below and we'll send you the datasheet.

When reliability cannot be compromised.

07/22/2026

Meet Luffy Yan, Customer Service Specialist at AMOT Controls. 👋

As part of our Asia Pacific team, Luffy works closely with all our departments to make sure our customers get the answers they need. Over the last ten years, she's watched the business grow significantly, and helped it grow too, one customer relationship at a time.

"Our business has grown so much since I joined, and I'm proud to have grown right alongside it. In my role, what I love is that our teams work so close together, like sales, customer service, purchasing, OPS, logistics, quality, finance, etc. That's what lets us move fast for our customers, and that's what makes us a team."

We are proud to have people like Luffy behind every solution we build.

07/16/2026

Reliability isn't a preference at sea. It's a condition of the mission.

IP67 and IP69K. Tested to 1,000,000+ cycles at rated load.

There is no service call out there, so we built the one that doesn't need one.

07/07/2026

Meet James Gay, OEM Sales Manager at AMOT Controls.

Eight years in, and no two days look alike. Based at our UK site, James helps customers find the right control solution for their toughest applications. As he puts it, he's "never working on the same application twice."

"The best bit, you're never solving it alone. Everyone here is willing to help, because at the end of the day, we all want the same thing. To find the right solution for the customer."

We're proud to have people like James behind every solution we build.

Address

8824 Fallbrook Drive
Houston, TX
77064

Telephone

+18885662668

Website

http://amot.com/

Alerts

Be the first to know and let us send you an email when AMOT posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AMOT:

Want your business to be the top-listed engineering company in Houston?