NANOVEA

NANOVEA Built in California

🟦 PROFILOMETERS 🟦 TRIBOMETERS 🟦 SCRATCH TESTERS 🟦 NANOINDENTERS
🟦 LAB SERVICES 🟦 CONSULTING

Advanced materials testing instruments, lab services and consulting for challenging applications in R&D and Quality Control.

NANOVEA’s Low Temperature Nanoindentation module supports mechanical property testing at controlled temperatures below -...
06/02/2026

NANOVEA’s Low Temperature Nanoindentation module supports mechanical property testing at controlled temperatures below -40°C.

The module uses an enclosed testing environment and Peltier cooling system to support low-temperature measurement conditions.

Applications include coatings, polymers, electronics, batteries, metals, composites, and advanced materials where mechanical behavior may change under cold exposure.

Learn more:
https://nanovea.com/instruments/pb1000/

Full Study:https://nanovea.com/climbing-hold-surface-roughness-analysis/A climbing hold may look simple, but its surface...
05/29/2026

Full Study:
https://nanovea.com/climbing-hold-surface-roughness-analysis/

A climbing hold may look simple, but its surface texture can be measured in detail.

NANOVEA used the JR25 Optical Profiler to analyze yellow and blue bouldering grip samples, comparing surface roughness, pore morphology, 3D topography, and functional surface parameters.

This same non-contact profilometry approach can support analysis of textured polymers, grip surfaces, coatings, rubber components, molded parts, and other engineered surfaces where roughness affects performance.

05/28/2026

Challenging angles should not stop surface measurement.

NANOVEA 3D non-contact profilometers support accurate and repeatable surface inspection across complex shapes, difficult geometries, and a wide range of material types.

Measure surface profile, roughness, topography, defects, step height, wear, texture, and other surface features without physically contacting the sample.

Discuss your application with a NANOVEA Application Engineer:
https://nanovea.com/profilometers/

05/26/2026

NANOVEA develops and manufactures advanced instruments for materials research and quality control, and applies that same technical expertise to testing services.

Capabilities include surface profilometry, 3D surface profile and roughness measurement, tribology, friction and wear testing, nanoindentation, scratch testing, and coating evaluation.

Our testing services provide measured results and reporting based on controlled test conditions.

Discuss your application with a NANOVEA Application Engineer:
https://nanovea.com/friction-wear-testing/

05/22/2026

Wear, friction, and scratch performance depend on the conditions of contact.

NANOVEA Tribometers help bring application-relevant testing conditions into the lab for accurate, repeatable wear, scratch, and friction analysis.

Evaluate materials under controlled conditions involving load, motion, lubrication, temperature, tribocorrosion, and other environmental variables.

Discuss your application with a NANOVEA Application Engineer:
https://nanovea.com/tribometers/

Transparent, reflective, and dark surfaces can be difficult to measure with confidence.NANOVEA ST400 Optical Profilomete...
05/21/2026

Transparent, reflective, and dark surfaces can be difficult to measure with confidence.

NANOVEA ST400 Optical Profilometer supports advanced 3D non-contact surface characterization across challenging materials, including transparent materials such as lenses and optical components.

Measure 3D surface profile, roughness, shape, curvature, dimensional features, and surface defects with measurable 3D data for R&D and quality control.

Discuss your application with a NANOVEA Application Engineer:
https://nanovea.com/instruments/st400/

Visual inspection can miss what surface data makes clear.NANOVEA ST400 Optical Profilometer provides fast, reliable, non...
05/20/2026

Visual inspection can miss what surface data makes clear.

NANOVEA ST400 Optical Profilometer provides fast, reliable, non-contact 3D surface characterization for quality control, research, and failure analysis.

Measure roughness, waviness, step height, film thickness, surface defects, microstructure, particle characterization, and advanced surface features with repeatable 3D data.

Discuss your surface analysis needs with a NANOVEA Application Engineer:
https://nanovea.com/instruments/st400/

PTFE coatings are widely used for low friction and chemical resistance, but durability still has to be measured under re...
05/19/2026

PTFE coatings are widely used for low friction and chemical resistance, but durability still has to be measured under real contact conditions.

This NANOVEA application note uses a Tribometer and Mechanical Tester to evaluate PTFE coating wear rate, friction coefficient, and adhesion failure.

The results help identify adhesive vs. cohesive failure modes, giving researchers and engineers better insight into coating performance and long-term durability.

Full Study:
https://nanovea.com/ptfe-coating-wear-test/

05/18/2026

Surface characterization is not always performed on simple, flat samples.

Real parts can be curved, rough, reflective, transparent, delicate, textured, or geometrically complex.

NANOVEA 3D optical profilometers provide non-contact surface measurement across a wide range of materials, shapes, and forms, supporting R&D, quality control, and failure analysis.

Discuss your application with a NANOVEA Application Engineer:
https://nanovea.com/profilometers/

Address

6 Morgan Ste 156
Irvine, CA
92618

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+19494619292

Website

Alerts

Be the first to know and let us send you an email when NANOVEA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to NANOVEA:

Shortcuts

Share

Category