Paradigm HSE

Paradigm HSE Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Paradigm HSE, Commercial & Industrial, La Porte, TX.

09/01/2026

Railcar operators. Rooftop maintenance crews. Platform workers on oil and gas sites.

These aren't environments where a standard solution is good enough.

Concept Controls engineers fall protection systems around the people using them and the conditions they work in daily, not around what's easiest to install.

That difference shows up in how the system performs when it actually matters.

See our engineered fall protection capabilities: https://hubs.la/Q04s-3CY0

09/01/2026

Paradigm HSE has acquired Contractors Risk Management (CRM), a trusted safety partner serving more than 500 clients across New England since 1984.

CRM brings deep expertise in jobsite safety inspections, OSHA training, industrial hygiene, and a fractional safety support model that embeds experienced professionals directly within client operations.

Jud Ludeking, CRM's founder, and his team are becoming shareholders in Paradigm HSE. Brian Stevens will continue leading CRM, preserving the culture and client relationships the company has built over four decades.

For Paradigm, this means a stronger safety management and consulting footprint in the northeastern United States, and another step toward integrated HSE coverage across North America.

Respiratory protection regulations require accurate fit testing.A PortaCount running outside manufacturer specifications...
08/27/2026

Respiratory protection regulations require accurate fit testing.

A PortaCount running outside manufacturer specifications can still complete a test, but the results won't reflect reality, and your program won't hold up to scrutiny.

TSI recommends annual service to maintain accuracy and performance. As Canada's only TSI Factory Authorized Service Center, Concept Controls handles the full inspection, calibration, firmware update, and sensor testing to keep your unit performing to spec.

Keep your program audit-ready: https://hubs.la/Q04sZ-S00

A well-designed fall protection system protects workers at height. But the program around it—hazard assessments, trainin...
08/25/2026

A well-designed fall protection system protects workers at height. But the program around it—hazard assessments, training, inspection records, and regulatory compliance—is what keeps your operation protected long-term.

Paradigm HSE covers both.

Concept Controls engineers and certifies the system.
HazTek's safety management professionals help build the program infrastructure that supports it.
Code Red Safety brings fall protection into turnaround and field environments where conditions change daily.

Reach out to our team: https://hubs.la/Q04sZTBg0

08/20/2026

A respiratory protection program can't wait two to three weeks for a unit to come back from service.

That's why Concept Controls, a Paradigm HSE company, offers PortaCount rentals alongside their factory-authorized service.

Send your unit in for calibration and inspection, and keep your fit testing schedule running without interruption.

Contact our team to check rental availability: https://hubs.la/Q04s-2Sz0

The citation isn't always about missing equipment. Often it's equipment that wasn't designed for the environment, anchor...
08/18/2026

The citation isn't always about missing equipment. Often it's equipment that wasn't designed for the environment, anchors that are not ideal for the load, or systems that were installed without the site-specific assessment they required.

Concept Controls, a Paradigm HSE company, approaches fall protection differently.

Every project starts with a site consultation that maps the actual hazards, movement patterns, and structural constraints before any hardware is specified.

The goal is a system that works in the real environment your team operates in every day.

Learn more: https://hubs.la/Q04sZZQ20

Your respiratory protection program depends on accurate fit testing data. That’s why it matters where your PortaCount ge...
08/13/2026

Your respiratory protection program depends on accurate fit testing data. That’s why it matters where your PortaCount gets serviced.

Concept Controls, a Paradigm HSE company, is Canada's only TSI Factory Authorized Service Center for the PortaCount respirator fit tester.

That means factory-trained technicians, manufacturer-spec calibration, and traceability your compliance records can stand behind.

Submit your service request: https://hubs.la/Q04s-3l-0

A turnaround is one of the highest-risk events a facility will undergo. Concurrent work, compressed timelines, and a sur...
08/11/2026

A turnaround is one of the highest-risk events a facility will undergo. Concurrent work, compressed timelines, and a surge in contractors all raise the stakes.

Code Red Safety's turnaround consulting team works with facilities well before the event begins, building a safety plan that accounts for every on-site hazard.

Learn more about our turnaround consulting: https://hubs.la/Q04pwzcL0

Safety is more than a priority — it’s a **pillar of the Paradigm culture.**Proud to recognize **Joe Lynch** for represen...
08/10/2026

Safety is more than a priority — it’s a **pillar of the Paradigm culture.**

Proud to recognize **Joe Lynch** for representing that standard every day. 👏

Congratulations, Joe!

Buying safety equipment without a strategy often leads to overspending, underprotection, or both.Concept Controls' equip...
08/06/2026

Buying safety equipment without a strategy often leads to overspending, underprotection, or both.

Concept Controls' equipment consulting team holds industry-recognized credentials, including CIH, CRSP, NCSO, and SA designations.

They work with your facility to assess hazards, recommend the right instrumentation, and build a program that fits how your team actually operates.

Reach out to our team to start that conversation: https://hubs.la/Q04pxNvj0

Address

La Porte, TX
77571

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Paradigm HSE posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Paradigm HSE:

Shortcuts

Share

Category