TIE Industrial

TIE Industrial T.I.E.

serves the industrial automation aftermarket as a leading supplier of new and refurbished parts, repairs and other services for CNC automation, Robotics, Motion Control and Process Automation.

Downtime isn’t usually something we celebrate… but we’ll make an exception for this one. T.I.E. will be closed Monday Se...
09/04/2026

Downtime isn’t usually something we celebrate… but we’ll make an exception for this one.

T.I.E. will be closed Monday September 7, 2026. All same day shipment eligible orders must ship by 2pm CST Friday September 4th.

Wishing everyone a safe, relaxing, and well-earned Labor Day weekend!

Oil on the floor. Excess play at the wrist. Unusual noise during movement.Those are the kinds of problems that can turn ...
09/02/2026

Oil on the floor. Excess play at the wrist. Unusual noise during movement.

Those are the kinds of problems that can turn into unplanned downtime if the wrist is not addressed.

T.I.E. Industrial repairs and refurbishes a wide range of robot wrists, helping maintenance teams address bearing failure, seal failure, crash damage, lubrication issues, and general wear.

Our team evaluates the wrist, identifies the issue, completes the repair, and gets the unit ready to return to service.

Seeing signs of wrist wear on your robot?

Learn more about our robot wrist repair capabilities: https://content.fanucworld.com/fanuc-robotic-wrist-repair/

September starts now. 🍂⚙️A new month is a good reminder to make sure your operation is ready for whatever the next few w...
09/01/2026

September starts now. 🍂⚙️

A new month is a good reminder to make sure your operation is ready for whatever the next few weeks bring.

The parts you have, the backups you’ve made, and the checks you do now can make a big difference when something unexpected hits the floor.

Start September prepared. Keep production moving.

⚙️ Fanuc Friday: How do you know a repaired part is ready to go back to work?Powering on is only part of the answer.T.I....
08/28/2026

⚙️ Fanuc Friday: How do you know a repaired part is ready to go back to work?

Powering on is only part of the answer.

T.I.E. Industrial uses Fanuc control test systems to put components through maximum rated load testing—including startup surge current and maximum current in both directions on each axis—while monitoring for faults.

It’s one more way we work to make sure repaired Fanuc components are ready for the demands of your machine.

See what maximum rated load testing looks like at T.I.E. Industrial:
https://content.fanucworld.com/testing-at-maximum-rated-load/

Still running legacy Fanuc systems? Finding the right parts doesn’t have to get harder as your equipment gets older.T.I....
08/27/2026

Still running legacy Fanuc systems? Finding the right parts doesn’t have to get harder as your equipment gets older.

T.I.E. Industrial’s inventory covers 35+ years of Fanuc installed base—from System 5 DC Servos to modern Fanuc i Series controls and servos, and everything in between.

Whether you’re maintaining a legacy system or supporting newer equipment, we help keep the parts you need within reach.

Older doesn’t mean unsupported.

Explore Fanuc parts, new or legacy: Fanucworld.com

When a robot goes down, the teach pendant is often one of the first places maintenance teams turn.It gives technicians d...
08/26/2026

When a robot goes down, the teach pendant is often one of the first places maintenance teams turn.

It gives technicians direct access to alarms, jogging, programming, and troubleshooting functions needed to diagnose issues and get production moving again.

If the pendant itself is damaged or failing, having the right replacement available matters.

T.I.E. Industrial carries 400+ FANUC teach pendant models, giving maintenance teams more options when they need to replace a worn or damaged unit.

Shop available models at: https://fanucworld.com/fanuc-robot-parts/fanuc-teach-pendant/

Maintenance Monday: Don’t Forget the Batteries🔋Your robot’s batteries may be small, but they’re responsible for protecti...
08/24/2026

Maintenance Monday: Don’t Forget the Batteries🔋

Your robot’s batteries may be small, but they’re responsible for protecting some pretty important information.

If those batteries fail, recovery can mean more than simply swapping in a new set.

Make battery checks part of your preventive maintenance routine and follow the recommended replacement schedule for your specific robot.

Want to know more about what your robot batteries protect and why they matter?⬇️

https://www.robots.com/articles/the-importance-of-robot-batteries

When a critical part fails, 48 days is a long time to wait.In June 2026, U.S. manufacturers reported an average 48-day c...
08/20/2026

When a critical part fails, 48 days is a long time to wait.

In June 2026, U.S. manufacturers reported an average 48-day commitment lead time for MRO supplies, according to the ISM Manufacturing PMI®.

For maintenance teams, that makes having the right parts source—and a repair option when replacement isn’t practical—more important than ever.

T.I.E. Industrial helps manufacturers keep equipment running with 150,000+ parts in stock, repair-by-exchange options, and support for obsolete and hard-to-find components.

When waiting weeks for a replacement isn’t an option, we’re ready to help.

💻 Good code is only half the equation.This quick-reference chart breaks down common CNC codes, what each command does, a...
08/19/2026

💻 Good code is only half the equation.

This quick-reference chart breaks down common CNC codes, what each command does, and the critical machine component responsible for carrying it out.

From spindle commands to feed moves and tool changes, understanding the connection between the code and the hardware can also help when it comes time to troubleshoot.

Want to dig deeper? Check out the full guide to essential CNC code:
https://content.fanucworld.com/9-essential-lines-of-code-every-cnc-programmer-must-master/

Address

1216 Heil Quaker Road
La Vergne, TN
37086

Opening Hours

Monday 7am - 7pm
Tuesday 7am - 7pm
Wednesday 7am - 7pm
Thursday 7am - 7pm
Friday 7am - 7pm
Saturday 8am - 7pm
Sunday 8am - 5pm

Telephone

+16154719463

Website

Alerts

Be the first to know and let us send you an email when TIE Industrial posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to TIE Industrial:

Shortcuts

Share

Category