Forever Fabrication

10/02/2026

We’ve started a new exhaust build series on our YouTube channel!

We’re working with our very own Felipe on his 2017 GMC Sierra 5.3, making changes in stages and documenting how each one affects the sound.

In episode one, we capture the stock exhaust sound and walk through our plan for the build. From there, we’ll share the fabrication, sound comparisons, and actual results as we go.

If you’ve been thinking about changing the exhaust on your own truck, follow along and let us know what you think.

Watch episode one here:
https://youtu.be/ZrgAtKVhwWM

We’re starting a new exhaust build on this 2017 GMC Sierra 5.3L.I...

09/10/2026

We’re now a dealer for Valvetronics Design!

Looking at one of their valve mufflers for your build? You can order through Forever Fabrication. We can also quote installation or work one into a custom exhaust here at our shop.

Whether you just need the parts or need help, putting everything together, let us know.

Forever Fabrication, here for your welding needs!

06/18/2026

Like many car enthusiasts, we were saddened to hear the news about Jeremy Clarkson’s cancer diagnosis.

For us, and for countless others around the world, Jeremy wasn’t just a TV host. He was part of what sparked a passion for cars and everything automotive. Watching Top Gear, it wasn’t just about the cars, it was about the adventures, the humor, the friendships, and the reminder that life is meant to be enjoyed.

The chemistry between Jeremy Clarkson, Richard Hammond, and James May created something truly special. They inspired an entire generation of gearheads, builders, racers, and dreamers. Many of us spent countless evenings laughing at their challenges, learning about cars we could only dream of owning, and sharing those moments with friends and family.

No matter what your favorite episode was, it’s hard to deny the impact Jeremy has had on automotive culture around the world.

From all of us at Forever Fabrication, we’re wishing Jeremy strength in the fight ahead and hoping for the very best outcome. Thank you for the years of entertainment, inspiration, and for helping so many of us fall even deeper in love with cars.

06/15/2026

The response to our Vortec 4200 Rear Sump Oil Pans has been incredible, and we're excited to announce that pre-orders are now open for the next production batch!

We're planning to begin shipping these oil pans at the end of July, and this will be a limited production run.

Whether you're planning an engine swap, building a trail rig, or putting together a unique project, now is the time to reserve yours before this batch is spoken for.

🔗 Pre-Order Here: https://shop.foreverfabrication.com/products/vortec-4200-rear-sump-wing-style-oil-pan-coming-soon?variant=45126332383421

All of our oil pans are built right here in our Minnesota shop with the same attention to detail and quality that we put into every product we manufacture.

Questions? Feel free to comment below, send us a message, email us at [email protected], or give us a call at 651-894-2210.

Thank you for supporting American-made fabrication and helping us continue to develop products for the Vortec 4200 community.

Upgrade your Vortec 4200 swap with Forever Fabrication’s rear sump oil pan. Fully welded steel construction, -10AN turbo drain, internal baffles, and dipstick relocation. Optional pickup tube available.

06/10/2026

A project years in the making.

This Acura Integra recently stopped back in for a few finishing touches, and we’re proud to have played a part in bringing this build to life alongside the team at JWP Automotive.

Our contributions to this project included:

• Custom turbo manifold
• Titanium intercooler piping
• Titanium downpipe and valved side-exit exhaust
• Custom chromoly front crash bar
• Matching chromoly strut tower brace
• Recent finishing work including exhaust trim alignment, a custom titanium heat ring, bumper support fabrication, and final fitment adjustments

The result is a clean, purpose-built Integra that looks just as good as it performs.

Big thanks to JWP Automotive for the opportunity to be part of this incredible build.

What do you think of the titanium side-exit setup?

05/06/2026

Some news hits a little different.

We never met Kyle Loftis, but like a lot of you, we’ve spent more nights than we can count going down the rabbit hole watching 1320 videos way later than we should have. Street pulls, track runs, of cars built in garages just like ours… the kind of content that got a lot of us hooked in the first place.

It didn’t matter where you were from. If you were into cars, you knew 1320.

Even here in Minnesota, seeing them come through felt like something bigger, like the scene we’re all part of was being documented in real time.

Losing people like this is never easy. It brings back memories of when we lost Ken Block… Paul Walker and Roger Rodas…and even local friends. These moments that remind you how tight-knit this community really is, even when you’ve never met.

Our thoughts are with Kyle’s family, friends, and everyone at 1320 Video.

His impact doesn’t go anywhere. It lives on in every late-night pull video, every build that gets pushed a little further, and every person who fell in love with cars because of what he helped create.

05/04/2026

May the 4th be with you.

The welds are strong with this one.

We don’t use the Force, we use precision!
Built to last. Ready for any mission.

If you’ve got a project in mind, we’re ready to build it.

04/23/2026

We’ve officially launched our newly designed website!

After a lot of work behind the scenes, everything is now in one place & better looking than ever! Our services, our work, and our growing line of parts.

If you’re looking for custom fabrication, production work, or performance parts, it’s all right here.

👉 www.foreverfabrication.com

We’re continuing to build and add more, but this is a big step forward for us.

Appreciate everyone who’s supported us along the way—more to come.