Fastline Fabrication & Off-Road

04/08/2026

Progress update on the MB7001-ES 4 Link Kit one of the JKU Builds. Crossmember MB3028 tie-in Vertical Downhill Weld with 1/4” fillets on 1/4” thick MB7001 Crossmember tied into Factory Frame 1/8” thick box tube: Miller 255 set at 18.2 Volts with 232 IPM using 0.035” ER70S-6 filler with 75/25 mix gas.
I had a 1/4” gap on my frame, so I made a 1/4” shim plate on the passenger side to keep the skid plate bolt bolts lined up for final assembly.
I’m posting this while I wait for frame/crossmember to cooldown for another HOT Pass.

02/04/2026

12/07/2025

A resolution approved by Congress in 1994 designates December 7 of each year as “National Pearl Harbor Remembrance Day,” and directs that all flags be lowered to half-staff from sunrise to sundown.

12/05/2025

Just Axles, Machine Shop, and Weld Engineering.

11/26/2025

10/10/2025

Small Business Thursday

09/19/2025

Follow the shop on Instagram.

https://www.instagram.com/fastline_fab

904 Followers, 854 Following, 222 Posts - See Instagram photos and videos from Fastline Fabrication LLC ~ Billy Holmes ()

07/27/2025

After 36 years of hard work, I can finally relate to a meme.

07/25/2025

06/26/2025

04/26/2025

My buddies at Sidewinder Fab sure do build cool stuff!