Wear-Concepts, Inc.

Call Directions Website

Wear-Concepts, Inc. Wear-Concepts is a provider of wear and abrasion resistant products, services, and fabrications.

A strong ceramic lining starts with the right bond.Wear-Con Cerami-Bond™ is an industrial-grade, two-part epoxy mortar d...
11/06/2026

A strong ceramic lining starts with the right bond.

Wear-Con Cerami-Bond™ is an industrial-grade, two-part epoxy mortar designed for bonding ceramic wear tiles. It provides high bond strength and chemical resistance while bonding securely to brick, tile and steel. It can also be used for horizontal, vertical and overhead installations.

When the application calls for dependable ceramic tile installation, Cerami-Bond is built for the job.

Some wear problems need more than an off-the-shelf part. WearCon’s fabrication capabilities allow us to build solutions ...
11/04/2026

Some wear problems need more than an off-the-shelf part. WearCon’s fabrication capabilities allow us to build solutions around the equipment and application they need to protect. Built for the job. Built for demanding industrial environments.

A planned shutdown gives you a valuable window to find wear before it turns into a bigger problem. Save this checklist f...
11/02/2026

A planned shutdown gives you a valuable window to find wear before it turns into a bigger problem. Save this checklist for your next inspection and take a closer look at the areas taking the most punishment every day. Finding the problem now can save a lot of downtime later.

The scariest surprise this Halloween isn't waiting at your front door. It's equipment going down when production is supp...
10/29/2026

The scariest surprise this Halloween isn't waiting at your front door. It's equipment going down when production is supposed to be running. Keep an eye on high-wear areas and address warning signs before they turn into an unexpected shutdown.

Happy Halloween from WearCon!

A lower upfront cost doesn't always mean a lower operating cost. If wear protection needs frequent replacement or contri...
10/27/2026

A lower upfront cost doesn't always mean a lower operating cost. If wear protection needs frequent replacement or contributes to unexpected downtime, the real cost can add up quickly.

Long-term performance should be part of the decision.

When corrosion and chemical wear are cutting equipment life short, RubberLine™ provides another layer of defense.WearCon...
10/23/2026

When corrosion and chemical wear are cutting equipment life short, RubberLine™ provides another layer of defense.

WearCon RubberLine™ is engineered for corrosion resistance and can last up to 3 to 5 times longer than alloys or hardened metals and up to 20 times longer than fiberglass.

It can be applied to equipment including pipes, tanks, pumps and fan housings to provide cost-effective protection in tough operating environments.

10/21/2026

Fall is a good time to take another look at equipment that has been working hard all year. Review high-wear areas before winter and identify components that may need attention during upcoming maintenance windows.

Planning ahead gives your team more options.

Since 1996, WearCon has helped industrial operations take on tough wear and abrasion challenges.Our team works to extend...
10/19/2026

Since 1996, WearCon has helped industrial operations take on tough wear and abrasion challenges.

Our team works to extend equipment life and reduce costly downtime with wear-resistant products and solutions built around each application. We support customers with technical expertise, custom engineering, field installation and ongoing service.

Nearly three decades later, the goal remains the same: help our customers keep equipment running longer and operations moving forward.

Built for severe impact and designed to get tougher with use.WearCon WC14M™ RingHammers are cast from a 14% manganese al...
10/16/2026

Built for severe impact and designed to get tougher with use.

WearCon WC14M™ RingHammers are cast from a 14% manganese alloy that starts at 350 BHN and work hardens up to 500 BHN during use.

They can replace OEM hammers or be custom made to fit specific mill and production requirements, all with no special installation requirements.

When the application hits hard, WC14M™ is built to hit back.

Replacing the same worn component again and again isn't much of a solution. Before the next replacement, ask a few quest...
10/14/2026

Replacing the same worn component again and again isn't much of a solution. Before the next replacement, ask a few questions about what's actually happening in the application. Save these five questions for the next time recurring wear shows up.

Address

2845 E Heartland Drive
Liberty, MO
64068

Opening Hours

Monday 7:30am - 4:30pm
Tuesday 7:30am - 4:30pm
Wednesday 7:30am - 4:30pm
Thursday 7:30am - 4:30pm
Friday 7:30am - 4:30pm

Telephone

(816) 587-1923

Alerts

Be the first to know and let us send you an email when Wear-Concepts, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share