Dyna-Cut Shears

Call Directions Website Contact the business

Dyna-Cut Shears Manual and Power Shears for cutting metal roofing and siding panels quickly and easily.

A final inspection catches some problems. Checking at each stage catches them before they're built in.Every Dyna-Cut she...
10/23/2026

A final inspection catches some problems. Checking at each stage catches them before they're built in.
Every Dyna-Cut shear is checked throughout assembly in Millington, Michigan, and backed by a 2-year limited warranty on parts and workmanship. Blades are consumables and aren't covered.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

If your siding line slows down this winter, it's a good window to look at automation before spring.The PRB-12 Shear & Au...
10/22/2026

If your siding line slows down this winter, it's a good window to look at automation before spring.
The PRB-12 Shear & Automation System adds auto start/stop, so the rollformer resumes on its own once the cut piece is removed, and a dynamic cutlist, so you can enter a cutlist while the metal is rolling. Call us today to automate your siding rollformer.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

Measure, mark, cut, repeat. Hand-cutting board and batten eats time on every siding job.The HRB-36 Board & Batten Blade ...
10/21/2026

Measure, mark, cut, repeat. Hand-cutting board and batten eats time on every siding job.
The HRB-36 Board & Batten Blade cuts the profile cleanly in a single motion, and it swaps onto the same HRB-36 your crew already runs.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

A shear is only as good as the support behind it.Every Dyna-Cut shear is built in Millington, Michigan, ships with a 2-y...
10/19/2026

A shear is only as good as the support behind it.
Every Dyna-Cut shear is built in Millington, Michigan, ships with a 2-year limited warranty on parts and workmanship, and has replacement parts and service available from the same team that built it. Keep your invoice on file; blades are consumables and aren't covered.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

Angle cuts at the gable are where panels get wasted when you're cutting by hand.The HRB-36 Angle Cut blade handles 3/12 ...
10/17/2026

Angle cuts at the gable are where panels get wasted when you're cutting by hand.
The HRB-36 Angle Cut blade handles 3/12 to 5/12 pitch in one clean motion, and it swaps onto the same shear your crew already uses for straight cuts.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

Ordering a blade? It starts with two answers:1. Which metal manufacturer's panels are you running?2. What's the panel pr...
10/16/2026

Ordering a blade? It starts with two answers:
1. Which metal manufacturer's panels are you running?
2. What's the panel profile?
From there, we custom-design and custom-cut the blade to match, so it fits your material instead of a generic one.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

Flashing, shingle trim, vinyl siding: the small jobs add up, and so do the measurements.The QuickCut Manual Shear is lig...
10/15/2026

Flashing, shingle trim, vinyl siding: the small jobs add up, and so do the measurements.
The QuickCut Manual Shear is lightweight and portable, with measure marks built into the table so repeat cuts come out the same length every time.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

Every Dyna-Cut shear is designed and built in Millington, Michigan, by the same team that stands behind it.Every model s...
10/12/2026

Every Dyna-Cut shear is designed and built in Millington, Michigan, by the same team that stands behind it.
Every model ships with a 2-year limited warranty on parts and workmanship. Keep your invoice on file; blades are considered consumables and aren't covered.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

10/10/2026

Making siding faster, easier, and more consistent comes down to the system behind the roll former.

Here's the Dyna-Cut automation system in action: the PRB-12 Shear, the Dyna-Cut Notcher, and automation that integrates directly with your roll former and runs through your entered cut list on its own.

✔ Dynamic Cut List: process metal while you're still entering measurements
✔ Fractional Assistant: enter fractions as they are, no decimal conversion
✔ Auto Start: the roll former starts the next piece as soon as the last one is removed

The PRB-12 handles board and batten, single lap, double lap, and custom profiles, and the Notcher covers horizontal and vertical siding. Call us today to automate your siding roll former.

📞 +1-989-522-5044
🌐 www.dyna-cut.com

A fast shear only helps if the material keeps up with it.The PRB-36 Power Shear is available with an optional roll-away ...
10/09/2026

A fast shear only helps if the material keeps up with it.
The PRB-36 Power Shear is available with an optional roll-away setup and in-feed and out-feed tables, and its blades are custom-cut to your exact panel profile so every cut comes out the same.
📞 +1-989-522-5044
🌐 www.dyna-cut.com

Address

4512 Industrial Drive
Millington, MI
48746

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+19895225044

Website

Alerts

Be the first to know and let us send you an email when Dyna-Cut Shears posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dyna-Cut Shears:

Shortcuts

Share

Category