Mike's Custom Fab

Call Directions

Mike's Custom Fab Custom fabricating, Tig welding, and CNC plasma projects welcome.

Welded up a new intake top and added injector bungs in the runners.
10/05/2026

Welded up a new intake top and added injector bungs in the runners.

Recently diagnosed a parasitic draw on this 2016 MKZ. This was a fun one. Draw after all modules finally go to sleep (ab...
09/20/2026

Recently diagnosed a parasitic draw on this 2016 MKZ. This was a fun one. Draw after all modules finally go to sleep (about 40mins) should be 70 mA and the meter would peak at 2.7A every 1min 44sec. The HS can network was the one with activity waking up, then trigger the other networks. The telematics module was waking up looking for 3G cell service. You could upgrade to a 4G module for $900-1400 if there's even a dealer worth a s**t in this area, but the customer choose to just leave it unplugged.

Haven't posted much lately, but here are pictures of projects. Some of fabrication/welding, some of wiring, and some gen...
05/30/2026

Haven't posted much lately, but here are pictures of projects. Some of fabrication/welding, some of wiring, and some general maintenance.

Some more powdercoated items and hardware.
01/10/2026

Some more powdercoated items and hardware.

Factory style intercooler out and more efficient aftermarket one in. So much more room for activities! 🤣Good luck Derric...
08/02/2025

Factory style intercooler out and more efficient aftermarket one in. So much more room for activities! 🤣
Good luck Derrick

Just finished up a few aluminum wonds for a vac unit.
04/27/2025

Just finished up a few aluminum wonds for a vac unit.

Very aggravating to buy expensive aftermarket parts designed for a specific use, just to find out they are nowhere near ...
04/26/2025

Very aggravating to buy expensive aftermarket parts designed for a specific use, just to find out they are nowhere near going to work for what they are supposed to.

A few more pulling truck parts. A midplate, valvecovers, and hitch bars.
04/11/2025

A few more pulling truck parts. A midplate, valvecovers, and hitch bars.

Back to working on some track bars for an old pickup.
04/06/2025

Back to working on some track bars for an old pickup.

Drew up and cut a AC delete plate for converting a Dentside to a factory non AC heater box.
03/17/2025

Drew up and cut a AC delete plate for converting a Dentside to a factory non AC heater box.

Address

Montrose, PA
18801

Telephone

+15707678071

Website

Alerts

Be the first to know and let us send you an email when Mike's Custom Fab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category